If 100 mL of 1.0 M sulfuric acid, H2SO4, is neutralized with 1.0 M calcium hydroxide,...

If 100 mL of 1.0 M sulfuric acid, H2SO4, is neutralized with 1.0 M calcium hydroxide, Ca(OH)2, how many mL of base must be added?

Expert Solution

Ca(OH)2 + H2So4 ---------> CaSO4 + 2H2O

1 mole 1 mole

Ca(OH)2 H2SO4

M1 = 1M M2 = 1M

V1 = V2 = 100ml

n1 = 1 n2 = 1

M1V1/n1 = M2V2/n2

V1 = M2V2n1/M1n2

= 1*100*1/1*1 = 100ml >>>answer

volume of Ca(OH)2 is 100ml

queen_honey_blossom answered 11 months ago

A solution of sodium hydroxide was neutralized by sulfuric acid. The volume of sodium hydroxide solution...

A solution of sodium hydroxide was neutralized by sulfuric acid. The volume of sodium hydroxide solution used was 675.0 mL, and the concentration was 0.875 M. Calculate the moles of sulfuric acid that were neutralized (assuming that the reaction goes to completion). Give your answer to three significant figures. 2NaOH (aq) + H2SO4 (aq) ? Na2SO4 (aq) + 2H2O (l

1) A 10.00 ml sample of an aqueous solution of calcium hydroxide is neutralized by 20.00...

1) A 10.00 ml sample of an aqueous solution of calcium hydroxide is neutralized by 20.00 ml of 0.02000 M NHO3(aq). What is the molarity of the calcium hydroxide solution? Enter only a numerical value, do not enter units. 2) Suppose you titrate 80.0 mL of 2.00 M NaOH with 20.0 mL of 4.00 M HCl. What is the final concentration of OH- ions. Enter only a numerical value, do not enter units. 3) Suppose a solution is prepared by...

31.4 mL of 0.657 M nitric acid is added to 46.5 mL of calcium hydroxide, and...

31.4 mL of 0.657 M nitric acid is added to 46.5 mL of calcium hydroxide, and the resulting solution is found to be acidic. 20.9 mL of 0.742 M potassium hydroxide is required to reach neutrality. What is the molarity of the original calcium hydroxide solution?

Hydrofluoric acid (HF) can be manufactured by treating calcium fluoride (CaF2) with sulfuric acid (H2SO4). A...

Hydrofluoric acid (HF) can be manufactured by treating calcium fluoride (CaF2) with sulfuric acid (H2SO4). A sample of fluorospar (the raw material) contains 75% by weight CaF2 and 25% inert (nonreacting) materials. The pure sulfuric acid used in the process is in 30% excess of that theoretically required. Most of the manufactured HF leaves the reaction chamber as a gas, but a solid cake is also removed from the reaction chamber that contains 5% of all the HF formed, plus...

A 70.0mL sample of 1.0 M NaOH is mixed with 44.0 mL of 1.0 M H2SO4...

A 70.0mL sample of 1.0 M NaOH is mixed with 44.0 mL of 1.0 M H2SO4 in a large Styrofoam cup; the cup is fitted with a lid through which passes a calibrated thermometer. The temperature of each solution before mixing is 23.9 Celcius. After adding the NaOH solution to the coffee cup, the mixed solutions are stirred until reaction is complete. Assume that the density of the mixed solutions is 1.00 g/mL, that the specific heat of the mixed...

20.0 mL of nitric acid (HNO3) solution is neutralized with 30.0 mL 0.10M of potassium hydroxide...

20.0 mL of nitric acid (HNO3) solution is neutralized with 30.0 mL 0.10M of potassium hydroxide (KOH) solution. what is the concentration of nitric acid solution? The answer is 0.67 M but how do you get that?

Solid calcium fluoride (CaF2) reacts with sulfuric acid (H2SO4) to form solid calcium sulfate (Ca... Solid...

Solid calcium fluoride (CaF2) reacts with sulfuric acid (H2SO4) to form solid calcium sulfate (Ca... Solid calcium fluoride (CaF2) reacts with sulfuric acid (H2SO4) to form solid calcium sulfate (CaSO4) and gaseous hydrogen fluoride (HF). The HF is then dissolved in water to form hydrofluoric acid. A source of calcium fluoride is fluorite ore containing 96.0 wt% CaF2 and 4.0 wt% SiO2. In a typical hydrofluoric acid manufacturing process, fluorite ore is reacted with 93 wt% aqueous sulfuric acid, supplied...

Question

If 100 mL of 1.0 M sulfuric acid, H2SO4, is neutralized with 1.0 M calcium hydroxide,...

Solutions

Expert Solution

Related Solutions