Question
In: Math
1) A rectangular window is built with 12 meters of framing materials. What must the dimensions...
1) A rectangular window is built with 12 meters of framing materials. What must the dimensions of the window be to let in the most light? Use calculus to solve
2) What are the dimensions of an aluminum can that holds 40 cubic inches of juice and that uses the least material? The can is cylindrical and capped on both ends. Use calculus to solve
Solutions
milcah answered 1 year agoRelated Solutions
A rectangular room is 12 meters long, 6 meters wide, and 3 meters high. 1] Calculate...
A rectangular room is 12 meters long, 6 meters wide, and 3
meters high.
1] Calculate the first three axial modes for the length of the
room.
2] Find the wavelength, then convert to frequencies, assuming
that the speed of sound in the room is 343 m/s.
3] Calculate the first 3 axial modes [Wavelenghts and
frequencies] for the width of the room.
4] Calculate the first axial modes [Wavelenghts and frequencies]
for the height of the room.
It is...
What are the dimensions for the cheapest possible rectangular box with a volume of 72 cm3 ...
What are the dimensions for the cheapest possible rectangular
box with a volume of 72 cm3 if the material for the bottom costs
$16/cm2, material for the sides costs $2/cm2, and material for the
top costs $20/cm2 ?
What are the dimensions of the box so that the cost of materials is minimized? A...
What are the dimensions of the box so that the cost of materials
is minimized?
A closed rectangular box has a volume of 16 cubic feet. It’s
made of two different materials; the top and bottom are made of a
material that costs 10 cents per square foot while the sides are
made of material that costs 5 cents per square foot.
1. What are narrow window studies and wide window studies in accounting research, and what are...
1. What are narrow window studies and wide window studies in
accounting research, and what are they used for respectively.
2. List Fair value hierarchy according to IFRS 13, ASC
820-10
Linux Basics 1.In Linux what is a Window Manager –name a window manager that is commonly...
Linux Basics
1.In Linux what is a Window Manager –name a window manager that
is commonly used?
2.If you were in a organisation that wanted to run a
commercially backed distribution of Linux which one would you
pick?
3.After the kernel is invoked at boot time, describe what
happens?
4.Why is it common practice to use a boot loader?
5.Name two loaders used in Linux?
6.What is systemd? How is it used?
7.What does systemdreplace? Why was the choice made...
1- How is protein made from mRNA? What raw materials must be present for this process...
1-
How is protein made from mRNA? What raw materials must be present
for this process to occur? Why is it important for translation that
ribosomes contain three sites for tRNA and not just one?
2-Why can transcription and translation be stimulatenous in
prokaryotes but not in eukaryotes?
The radius is 1/3 meter greater than the height. The volume is 98/9ππ cubic meters. For the following exercises, find the dimensions of the right circular cylinder described.
For the following exercises, find the dimensions of the right circular cylinder described.The radius is 1/3 meter greater than the height. The volume is 98/9ππ cubic meters.
1- The interdependence between materials and their __________ must also be recognized. a. environment b. processing ...
1- The interdependence between materials and their __________
must also be recognized.
a.
environment
b. processing
c. structure d. properties
2-The design process primarily consists of design, prototype,
and __________ stages.
a. production
b. selection
c. quality d. structure
3- Approaches to material selection goes through a sequence of
activities of design, material selection, process selection,
manufacture, evaluation, and _________.
a. production
b. marketing
c. feedback d. none of
the above
4- List three geometric considerations to consider for the...
1- The interdependence between materials and their __________ must also be recognized. a. environment b. processing ...
1- The interdependence between materials and their __________
must also be recognized.
a.
environment
b. processing
c. structure d. properties
2-The design process primarily consists of design, prototype,
and __________ stages.
a. production
b. selection
c. quality d. structure
3- Approaches to material selection goes through a sequence of
activities of design, material selection, process selection,
manufacture, evaluation, and _________.
a. production
b. marketing
c. feedback d. none of
the above
4- List three geometric considerations to consider for the...
If the outside of a cell has a potassium concentration of 12 mM what must be...
If the outside of a cell has a potassium concentration of 12 mM
what must be the inside concentration of potassium for the
condition of no net flux of potassium across the membrane at Vm = -
75 mV
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- As you go through your daily activities, look for examples of people engaged in conflict. You...
- Summarize key functions of managements in your own words (Planning, Organizing, Leading and Controlling) Please don't...
- For college physics. Please write in paragraph form, typed. Thanks! Respond to the following: In your...
- What is the difference between a bitmap image and a vector image? In terms of processing...
- Albuquerque, Inc., acquired 36,000 shares of Marmon Company several years ago for $900,000. At the acquisition...
- During the year, Hepworth Company earned a net income of $59,225. Beginning and ending balances for...
- For python! You walk into a fast food restaurant and order fries, a burger, and a...
ADVERTISEMENT