A gasoline engine is modified to run on hydrogen. Assuming hydrogen releases heat at the rate...

A gasoline engine is modified to run on hydrogen. Assuming hydrogen releases heat at the rate of 120 MJ/Kg when burnt, a. Write the chemical reaction involved in burning of hydrogen in air. b. Determine ratio of mass of air to fuel (A/F ratio) c. What is the fuel consumption rate, if engine produces 100 kW? The engine operates between combustion temperature of 585ºC and exhaust temperature of 50º C? d. What is the mass flow rate of water in exhaust pipe?

Expert Solution

samet mamat answered 2 years ago

1. Real heat engines, like the gasoline engine in a car, always have some friction between...

1. Real heat engines, like the gasoline engine in a car, always have some friction between their moving parts, although lubricants keep the friction to a minimum. Would a heat engine with completely frictionless parts be 100% efficient? Why or why not? Does the answer depend on whether or not the engine runs on the Carnot cycle? Again, why or why not? 2.Some critics of biological evolution claim that it violates the second law of thermo- dynamics, since evolution involves...

Though the electric-gasoline engine allows better miles per gallon relative to a traditional gasoline engine, it...

Though the electric-gasoline engine allows better miles per gallon relative to a traditional gasoline engine, it is not without technological tradeoffs. Regarding the first electric-gasoline cars to market, much of the mpg achieved was due to styling not the ability to run on electricity, which from market surveys not as appealing as the styling of a sleeker vehicle body design. New and limited infrastructure for servicing these vehicles was created, which may have deterred buyer acceptance. Question What fundamental technical...

Professor Modyn wants to power his refrigerator with a heat engine. A Carnot heat engine receives...

Professor Modyn wants to power his refrigerator with a heat engine. A Carnot heat engine receives heat from a reservoir at 493.0°C at a rate of 767 kJ/min and rejects heat to the ambient air at 29.1°C. The entire work output of the heat engine is used to drive a refrigerator that removes heat from the refrigerated space at -3.23°C and transfers it to the same ambient air at 29.1°C. Note: The IUPAC sign conversion for work is used. Work...

Assuming that there is no long-run relationship between the inflation rate and unemployment. If this is...

Assuming that there is no long-run relationship between the inflation rate and unemployment. If this is true, then why is it that people pay such close attention to every move made by the Fed?

A Carnot heat engine receives heat at 850 K and rejects the waste heat to the...

A Carnot heat engine receives heat at 850 K and rejects the waste heat to the environment at 298 K. The entire work output of the heat engine is used to drive a Carnot refrigerator that removes heat from the cooled space at -17⁰C at a rate of 450 kJ/min and rejects it to the same environment at 298 K. Determine; (a) the rate of heat supplied to the heat engine and (b) the total rate of heat rejection to...

A double-pipe heat exchanger is designed as an engine oil cooler. The flow rate of oil...

A double-pipe heat exchanger is designed as an engine oil cooler. The flow rate of oil is 5 kg/s, and it will be cooled from 60°C to 40°C through annulus (ID = 0.10226 m, OD = 0.1143 m). Sea water flows through the tubes (ID = 0.02664 m, OD = 0.03340 m) and is heated from 10°C to 30°C. The number of bare tubes in the annulus is 3, and the length of the hairpin is 3 m. Assume that...

The combustion of 0.4196 g of hydrocarbon releases 17.55 kJ of heat. The masses of the...

The combustion of 0.4196 g of hydrocarbon releases 17.55 kJ of heat. The masses of the products are 1.418 g of carbon dioxide (CO2) and 0.290 g of water (H2O). The standard formation enthalpy for CO2(g) and H2O(l) are −393.5 kJ/mol and −285.8 kJ/mol, respectively. (a) What is the empirical formula of the compound? (b) If the approximate molar mass of the compound is 76 g/mol, calculate the standard enthalpy of formation. Δ H o f = kJ mol

3A. Draw a diagram of a heat engine and label (a) heat input, (b) heat output,...

3A. Draw a diagram of a heat engine and label (a) heat input, (b) heat output, and (c) work output. B. Draw a diagram for the outcomes of flipping four coins and label them with the probability of obtaining each macrostate.

Definition of Work, Energy,Power, and Torque In Gasoline Engine

Select the best engine in term thermal efficiencies of an actual and reversible heat engine of two heat engine given below and give reason for your selection

Select the best engine in term thermal efficiencies of an actual and reversible heat engine of two heat engine given below and give reason for your selection Engine A:-Source temperature 800K, heat input rate 450 kW, heat rejection rate 300 kW, sink temperature 315K Engine B:-Source temperature 650K, heat input rate 345 kW, pumping power 5 kW, turbine power 120 kW, sink temperature 300K.

Question