Question

In: Mechanical Engineering

A nozzle at standard sea level pressure has two water manometers measuring the static pressure at...

A nozzle at standard sea level pressure has two water manometers measuring the static pressure at two points 1 and 2. The upstream diameter D1 is 8 in and the downstream diameter D2 is 2 in, respectively. Air flows through the nozzle, and the air and water temperatures are 60◦F. If the upstream manometer has a column height of h1 = 1/32 in and the downstream manometer has a column height of 8.0 in, what is the mass flow rate through the nozzle?

Solutions

Expert Solution


Related Solutions

A compressed air nozzle has a diameter of .250in and line pressure of 109psi. Atmospheric pressure...
A compressed air nozzle has a diameter of .250in and line pressure of 109psi. Atmospheric pressure is 14.7psi. What is the mass flow rate and velocity of the nozzle? If five nozzles are attached to the same air line with 109psi, what will the mass flow rate and velocity be then? Is either flow choked?
Question 4 The sea water (RD=1.03) level on one side of a sea lock is 3.5m...
Question 4 The sea water (RD=1.03) level on one side of a sea lock is 3.5m high. Determine the force on the 5m wide sea lock and also the location of this force from the bottom. If a 300mm diameter hole is cut out and a cover plate bolted in place, determine the force on the cover plate and also the location to the center of the hole. The tops of the hole is 2.35m below the level of the...
1.The Springfield Water Treatment plant is constantly measuring the quality of their drinking water. The level...
1.The Springfield Water Treatment plant is constantly measuring the quality of their drinking water. The level of pH is one item that is measured by them, and the water treatment plant has a target pH of 8.2. In a recent test of 14 samples of water from the treatment plant, they found the following pH levels in their water: 8.6, 8.5, 9.1, 8.4, 8.1, 9.3, 8.8, 8.9, 9.3, 8.0, 8.7, 8.6, 8.7, 9.1 . Also assume that the pH level...
Question 1. The height of a mercury column for atmospheric pressure at sea level is h...
Question 1. The height of a mercury column for atmospheric pressure at sea level is h = 0.760 + or - 0.003m of mercury (m-Hg).If the density of mercury is p = 13600 + or - 1000kg/m3 and the acceleration due to gravity, g = 9.8 + or - 0.1ms-2 , determine the value of atmospheric pressure Po = pgh and its uncertainty in SI units. Question 2. A particle is moving in a straight line so that its velocity...
At some location and at some initial time the atmospheric pressure at sea level is 1000mb...
At some location and at some initial time the atmospheric pressure at sea level is 1000mb and the temperature between sea level and 900mb surface is 0°C. The atmosphere is in hydrostatic balance. (a) What is the height above sea level of the 900mb surface? (b) Over a period of one day the temperature of sea level and the 900mb surface rises from 0 to 3°C, but the height of the 900mb surface does not change. What is the new...
In Athens, GA, which is ≈ 600 ft above sea level, the average barometric pressure is...
In Athens, GA, which is ≈ 600 ft above sea level, the average barometric pressure is 29.8 inches of mercury. Choose all of the places from this list that would have a barometric pressure lower than the average barometric pressure in Athens, GA. The choices are: A. A hot¸sunny day on the beach in Daytona¸Florida,B.In Death Valley on a clear¸sunny day,C.In the eye of a hurricane,D.n the center of a tornado, E. Inside the face mask of a scuba diver...
Below is a data set for how the pressure increases with depth (distance below sea level),...
Below is a data set for how the pressure increases with depth (distance below sea level), where pressure is specified in units of kiloPascals (kPa) and depth in meters (m) Depth (m) Pressure (kPa) 10 202 20 310 30 401 40 503 50 599 Find the equation of the best-fit line. You’ll need to calculate the slope and y-intercept in order to do this. What does the slope physically represent? What does the y-intercept physically represent? Using your equation, predict...
Research and Identify the advantages and disadvantages of Measuring Level using differential pressure transmitters for both...
Research and Identify the advantages and disadvantages of Measuring Level using differential pressure transmitters for both closed and open tanks.
compressible flow: a converging-diverging nozzle has an area ratio of 5 and a stagnation pressure of...
compressible flow: a converging-diverging nozzle has an area ratio of 5 and a stagnation pressure of 1 MPa. Assume that the gas in the nozzle behaves exactly like air. Which of the following most accurately gives the range of nozzle exit pressures for which the flow is choked, but has subsonic flow at the nozzle exit? a)990 kPa ?? 1 MPa b)244 kPa ?? 1 MPa c)21 kPa ?? 1MPa d)1 kPa ?? 1 MPa e)244 kPa ?? 990 kPa...
An airplane weighing 5,000 lb is flying at standard sea level with a velocity of 550...
An airplane weighing 5,000 lb is flying at standard sea level with a velocity of 550 mi/h. At this velocity, the L/D ratio is a maximum. The wing area and aspect ratio are 200 ft2 and 8.5, respectively. The Oswald efficiency factor is 0.93. Calculate the total drag on the airplane. Assume ?? = 0.002377 slug/ft3. (Round the final answer to one decimal place.) The total drag on the airplane is _______lb.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT