A compressed air nozzle has a diameter of .250in and line pressure of 109psi. Atmospheric pressure...

A compressed air nozzle has a diameter of .250in and line pressure of 109psi. Atmospheric pressure is 14.7psi. What is the mass flow rate and velocity of the nozzle? If five nozzles are attached to the same air line with 109psi, what will the mass flow rate and velocity be then? Is either flow choked?

Expert Solution

samet mamat answered 2 years ago

I need to design an air nozzle for a compressed air system with multiple outlets. All...

I need to design an air nozzle for a compressed air system with multiple outlets. All I know about the current system is there is 109 psi available in the air line. If I use the mass flow rate equation for a compressed ideal gas, how do I know the pressure hasn’t dropped in the line to decrease the Mach number as I increase the area of the nozzles? If the flow is choked, will the velocity remain constant as...

In a supermarket, air at atmospheric pressure and 25 °C is supplied to an air handling...

In a supermarket, air at atmospheric pressure and 25 °C is supplied to an air handling unit through a rectangular duct with a cross section of 0.5 m x 0.1 m. The air handling unit will distribute 2/3 of the air to the large shopping area of the supermarket at 25 °C, and it will cool the remaining air to -5 °C and distribute it to a walk-in refrigerator. To avoid frictional pressure losses, the average air velocity in the...

Air flows in a converging-diverging nozzle. The nozzle throat area is 50 cm2. The total pressure...

Air flows in a converging-diverging nozzle. The nozzle throat area is 50 cm2. The total pressure at the nozzle inlet is 1 MPa. The total pressure at the nozzle exit is 650 kPa. The Mach number at the nozzle exit is 0.70. Find the nozzle exit area. 51.7 cm2 84.2 cm2 35.6 cm2 54.7 cm2

A rock sample is placed in a strength-testing machine at atmospheric pressure and is compressed axially...

A rock sample is placed in a strength-testing machine at atmospheric pressure and is compressed axially to failure. A force of 12,000 Ibf was required for rock failure, and the cross- sectional area of the sample were 2.0 sq in. The sample failed along a plane that marks a 35 angle with the direction of compressional loading A) Construct the Mohr's circle using the two principal stresses present B) Compute the shear stress present along the plane of failure C)...

Atmospheric air, at constant conditions, 102 kPa pressure and 30 ° C to a air conditioning...

Atmospheric air, at constant conditions, 102 kPa pressure and 30 ° C to a air conditioning system enters at 60% relative humidity at temperature. The volumetric flow of atmospheric air is 100 L / s. Air, It is separated from the air conditioning system at a pressure of 95 kPa and a temperature of 15 ° C at 100% relative humidity. In this process, the temperature of the condensing water is 15 ° C. This air conditioning Calculate the heat...

Air is supplied to a convergent–divergent nozzle from a large tank in which the pressure and...

Air is supplied to a convergent–divergent nozzle from a large tank in which the pressure and temperature are kept at 700 kPa and 40°C, respectively. If the nozzle has an exit area that is 1.6 times the throat area and if a normal shock occurs in the nozzle at a section where the area is 1.2 times the throat area, find the pressure, temperature, and Mach number at the nozzle exit. Assume one-dimensional, isentropic flow.

air at a temperature of 500c id compressed at a constant pressure of 1.2mpa from a...

air at a temperature of 500c id compressed at a constant pressure of 1.2mpa from a volume of 2cu meters to volume of 0.4 cu meters. If the initial internal energy decrease 4820kj find a. The work done during the reversible process b. The heat transfered c. The change of enthalpy.

In class we showed that hot air at atmospheric pressure is less dense than cooler air...

In class we showed that hot air at atmospheric pressure is less dense than cooler air at the same pressure. Because of this difference hot-air balloons can stay aloft. Assume that you have an air-balloon that has the volume of 500 m3 and the surrounding air is at 100C. You want to lift 250 kg object (in addition to the mass of the hot air that is inside the balloon). What must be the temperature of the air in the...

Air is supplied to a convergent–divergent nozzle from a reservoir where the pressure is 100 kPa....

Air is supplied to a convergent–divergent nozzle from a reservoir where the pressure is 100 kPa. The air is then discharged through a short pipe into another reservoir where the pressure can be varied. The cross-sectional area of the pipe is twice the area of the throat of the nozzle. Friction and heat transfer may be neglected throughout the flow. If the discharge pipe has constant cross-sectional area, determine the range of static pressure in the pipe for which a...

Fluid (air) enters a nozzle at 150 m/s, 26.85 oC, and at a pressure of 200...

Fluid (air) enters a nozzle at 150 m/s, 26.85 oC, and at a pressure of 200 kPa. Assuming isentropic flow, evaluate the temperature and pressure of the fluid at a location where the speed of fluid equals the speed of sound. What is the ratio of the area at this location to the entrance area?

Question