Question

In: Mechanical Engineering

Your company is designing a part that will see a cyclically applied load, before calculating the...

Your company is designing a part that will see a cyclically applied load, before calculating the number of cycles till failure you need to determine the endurance limit. Determine the endurance limit on the given loading, geometry, and material.

Given Data:

Sut = 800 MPa

Sy = 310 MPa

Operating temperature = 120 degrees C

Surface Finish: Hot-Rolled

Specimen Rotating? Yes

Cross-section: Solid Circle

d = 20 mm

Reliability = 75%

Stresses Min(MPa) Max(MPa) Mean(MPa) Amp(MPa)
Axial -43 82 19.5 62.5
Bending -20 10 -5 15
Torsion -10 10 0 10
Von Mises 65.34 93.62 14.5 79.41

Solutions

Expert Solution


Related Solutions

1. A load of 25,000 N is applied on a part of radius 15 mm, what...
1. A load of 25,000 N is applied on a part of radius 15 mm, what is the shear stress,?? Hint, shear stress = load/cross sectional area. (up to 10 points) 2. If the maximum shear stress,?, is 250MPa and the applied load is 40,000 N what must the area be to ensure it is a safe design? Hint, load/shear stress = area. (up to 10 points) 3. A rivet of radius 5 mm has a shear stress maximum of...
Scenario Suppose you are designing a piece of software for a packaging company. A part of...
Scenario Suppose you are designing a piece of software for a packaging company. A part of the software involves an items capacity limit mechanism to prevent a package from being shipped when it's filled past its capacity. Aim Define a class called Package, which will have a maximum item capacity of 6. The package should be initialized with the number of items. If the number of items exceeds the capacity limit during initialization, it should print out a message indicating...
Study Designs - Part 1 INSTRUCTIONS: In working through these questions, take time in designing your...
Study Designs - Part 1 INSTRUCTIONS: In working through these questions, take time in designing your study to consider how best to reduce confounding, various biases, and improve generalizability. Randomized Trials Imagine that you just read the following report: Antioxidants Don’t Lessen Strokes for at-Risk Women (From a nytimes.com article by Nicholas Bakalar, published 8/21/2007) “Supplements of the antioxidants beta carotene, vitamin C and vitamin E may be good for you, but a new study reports that they have no...
Calculating the cost of Full-Time and Part-Time Employment In your role as a compensation analyst, you...
Calculating the cost of Full-Time and Part-Time Employment In your role as a compensation analyst, you have been assigned to calculate and compare the estimated costs of hiring full-time and part-time employees in anticipation of staffing a project. It will take 100,000 work hours to complete the project, and the project must be completed within a 5-workweek period. The workweek runs Monday through Friday, within the daily hours of 8 am to 4 pm. Full-time workers provide 40 hours of...
What aspects of Maslow or Roger's theory do you see applied most in your life? (500-750)
What aspects of Maslow or Roger's theory do you see applied most in your life? (500-750)
tell me how you see your culture has played a part in your current listening and...
tell me how you see your culture has played a part in your current listening and verbal communication skills. Next, with all the different cultures in mind, tell me all the ways you disagree with the following statement, "To produce understandable messages, we have to abide by the cooperative principle." Add to this all of the negative aspects of the principle you can find. Lastly, give me a specific example from your life when you failed to demonstrate the cooperative...
An experienced Python programmer in your company wants your assistance calculating the division of the numerator...
An experienced Python programmer in your company wants your assistance calculating the division of the numerator being the sum of all the multipliers of four divided by the denominator of all the multipliers of three using one for loop and one range statement respectively. Both sums of the numerator and denominator respectively are to be calculated using the same range of numbers between (and including) the number 0 and up to (and including) the number 100. The experienced Python programmer...
Part 1. Select an object from your everyday life that GD&T could be applied to. Attach...
Part 1. Select an object from your everyday life that GD&T could be applied to. Attach a graphic image of it (a photograph, a scanned sketch or a computer generated drawing) in JPEG format here. Part 2. Identify two primary functions of this part (e.g. must assemble to other part(s), smooth rolling, must not wobble when placed on a flat surface). Briefly describe the functions (maximum of 200 words). Part 3. Assign a minimum of two geometric tolerances (including at...
Part 1. Select an object from your everyday life that GD&T could be applied to. Attach...
Part 1. Select an object from your everyday life that GD&T could be applied to. Attach a graphic image of it (a photograph, a scanned sketch or a computer generated drawing) in JPEG format here. Part 2. Identify two primary functions of this part (e.g. must assemble to other part(s), smooth rolling, must not wobble when placed on a flat surface). Briefly describe the functions (maximum of 200 words). Part 3. Assign a minimum of two geometric tolerances (including at...
When designing a column against buckling, how do you decide weather to use the Johnson or Euler formula in your calculations when computing the critical buckling load?
 When designing a column against buckling, how do you decide weather to use the Johnson or Euler formula in your calculations when computing the critical buckling load?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT