Question

In: Mechanical Engineering

From a surface measurement made by surface profilometer, the following point values were obtained. (The scale...

From a surface measurement made by surface profilometer, the following point values were obtained. (The scale factor is 0.6 micrometer). There are 10 points. 516,534,518,533,518,530,520,526,521 and 526.

Try to find Ra,Rq,Rt values and Ratio Ra/Rq.

Solutions

Expert Solution

samet mamat answered 2 years ago
Next > < Previous

Related Solutions

In one measurement the following values were obtained : mass of the substance: M=1.3kg, Power used...
In one measurement the following values were obtained : mass of the substance: M=1.3kg, Power used : P=8.1W Slope of the Temp vs Time: S=0.027 oC/sec. Knowing that the error on each measured value was 5% the error on specific heat capacity is (in J/(kg oC) (values may be non-physical )
The following sample of 9 values were obtained in a study of the relationship between the...
The following sample of 9 values were obtained in a study of the relationship between the weight and chest size of infants at birth: Weight (kg) 2.75 2.15 4.41 5.52 3.21 4.32 2.31 4.30 3.71 Chest size (cm) 29.5 26.3 32.2 36.5 27.2 27.7 28.3 30.3 28.7 Obtain a scatter plot of the data and comment on the correlation between the two variables. Compute the correlation coefficient (r) and test whether it differs from 0 (use level of significance of...
The following values of a response Y were obtained for three settings of a categorical predictor...
The following values of a response Y were obtained for three settings of a categorical predictor A. A = 1 0.090 0.800 33.070 −1.890 A = 2 5.120 1.580 1.760 1.740 A = 3 5.080 −3.510 4.420 1.190 Suppose we assume the normal regression model for these data with one categorical predictor. a) If you have been able to fix any problems encountered with the model, carry out a one-way ANOVA to test for any differences among the conditional means...
Match the following variables with the measurement scale (Nominal, Ordinal, or Interval/Ratio), and whether the measurement...
Match the following variables with the measurement scale (Nominal, Ordinal, or Interval/Ratio), and whether the measurement is Discrete or Continuous.    Number of text messages received daily.    Socail Security Number Reaction time on a task    Grades assigned in a class (A, B, C, D, F) Score on an IQ test A. Interval/Ratio; Discrete B. Nominal; Discrete C. Interval/Ratio; Continuous D. Ordinal; Discrete E. Nominal; Continuous F. Ordinal; Continuous
(7) The following values were obtained for the nitrate concentration (mg/L) in a sample of river...
(7) The following values were obtained for the nitrate concentration (mg/L) in a sample of river water: 0.403, 0.410, 0.401, and 0.380. The last measurement is suspect. Based on this data set only, should it be rejected? Justify your answer. (8) Three further measurements were added to those given in question (7) so that the complete results became: 0.403, 0.410, 0.401, 0.380, 0.400, 0.413, and 0.411. Should “0.380” still be retained/rejected? Justify your answer. (9) Based on questions (7) and...
The following data were obtained for the concentration vs. time for a certain chemical reaction. Values...
The following data were obtained for the concentration vs. time for a certain chemical reaction. Values were measured at 1.0 s intervals, beginning at 0.00 and ending at 20.0 s. Concentrations in mM are: 10.00, 6.91, 4.98, 4.32, 3.55, 3.21, 2.61 2.50, 2.22, 1.91, 1.80, 1.65, 1.52, 1.36 1.42, 1.23, 1.20, 1.13, 1.09, 1.00, 0.92 a) Plot concentration, c, vs. time, t, ln c vs. t, and 1/c vs. t. b) Decide whether the data best fit zero-order, first-order or...
For each of the following variables, state the scale of measurement that each variable appears to...
For each of the following variables, state the scale of measurement that each variable appears to represent, and make sure to provide a brief rationale for your decision. The primary language of an individual’s grandmother IQ scores Reading comprehension ability of eighth-grade students, as demonstrated by their percentile rank performance (relative to a national norm) in a standardized reading comprehension test. House numbers The system of military grades for those enlisted in the U.S. Navy
(1 point) Samples were collected from two ponds in the Bahamas to compare salinity values (in...
(1 point) Samples were collected from two ponds in the Bahamas to compare salinity values (in parts per thousand). Several samples were drawn at each site. Pond 1: 37.02, 36.72, 37.36, 37.71, 37.01, 37.45, 37.54 Pond 2: 39.21, 38.51, 38.66, 38.24, 40.08 Use a 0.05 significance level to test the claim that the two ponds have the same mean salinity value. (a) The test statistic is
(1 point) Samples were collected from two ponds in the Bahamas to compare salinity values (in...
(1 point) Samples were collected from two ponds in the Bahamas to compare salinity values (in parts per thousand). Several samples were drawn at each site. Pond 1: 37.36, 37.32, 37.45, 36.72, 37.03, 37.71, 37.01 Pond 2: 39.05, 38.66, 38.51, 38.89, 38.53 Use a 0.050.05 significance level to test the claim that the two ponds have the same mean salinity value. (a) The test statistic is
(1 point) Samples were collected from two ponds in the Bahamas to compare salinity values (in...
(1 point) Samples were collected from two ponds in the Bahamas to compare salinity values (in parts per thousand). Several samples were drawn at each site. Pond 1: 37.02, 36.72, 37.03, 38.85, 36.75, 37.54, 37.32 Pond 2: 38.71, 38.53, 39.21, 39.05, 38.89 Use a 0.050.05 significance level to test the claim that the two ponds have the same mean salinity value. (a) The test statistic is  . (b) The conclusion is A. There is not sufficient evidence to indicate that the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT