Question

In: Electrical Engineering

Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor...

Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor 8087, a parallel connector, a serial connector, ADC and DAC connector for data conversion, a 16 byte seven segment display, a 64-key matrix keyboard, a USB connector thru a DMA for high speed data transfer. A special connector to connect a printer. The system must have an interrupt controller to handle all the I/O interface. The main memory size will be 1 Mbyte.

Show all the diagrams needed to construct your design including all the I/O interface and devices connected, show a memory map and the type of memory you will need for you design including the configuration and decoding system. You must include the programming needed for set up the complete system. Use pseudo code for each driver and program each of the interface needed.

Solutions

Expert Solution


Implementation:-

Plz hit the like symbole.....

Manojponduru answered 1 year ago
Next > < Previous

Related Solutions

Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor...
Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor 8087, a parallel connector, a serial connector, ADC and DAC connector for data conversion, a 16 byte seven segment display, a 64-key matrix keyboard, a USB connector thru a DMA for high speed data transfer. A special connector to connect a printer. The system must have an interrupt controller to handle all the I/O interface. The main memory size will be 1 Mbyte. Show...
Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor...
Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor 8087, a parallel connector, a serial connector, ADC and DAC connector for data conversion, a 16 byte seven segment display, a 64-key matrix keyboard, a USB connector thru a DMA for high speed data transfer. A special connector to connect a printer. The system must have an interrupt controller to handle all the I/O interface. The main memory size will be 1 Mbyte. Show...
Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor...
Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor 8087, a parallel connector, a serial connector, ADC and DAC connector for data conversion, a 16 byte seven segment display, a 64-key matrix keyboard, a USB connector thru a DMA for high speed data transfer. A special connector to connect a printer. The system must have an interrupt controller to handle all the I/O interface. The main memory size will be 1 Mbyte. Show...
WHAT IS THE PSEUDOCODE OF THE FOLLOWING PROBLEM? Design a microcomputer system using a uP 8086...
WHAT IS THE PSEUDOCODE OF THE FOLLOWING PROBLEM? Design a microcomputer system using a uP 8086 10 Mhz. This system must have a Coprocessor 8087, a parallel connector, a serial connector, ADC and DAC connector for data conversion, a 16 byte seven segment display, a 64-key matrix keyboard, a USB connector thru a DMA for high speed data transfer. A special connector to connect a printer. The system must have an interrupt controller to handle all the I/O interface. The...
Design a 8086 microprocessor base system that manage 1Mbyte of memory and can handle serial and...
Design a 8086 microprocessor base system that manage 1Mbyte of memory and can handle serial and parallel communication, a keyboard, a screen, a printer and a USB connection that handle high capacity secondary memory. Show all the connections needed and use all the necessary family chips needed to handle the I/O Systems. Show the memory map needed and the necessary I/O drivers. Use an interrupt manage chip to handle the I/O devices to be connected.
Design a system with one input called “Up” such that when “Up” equals 1, the machine...
Design a system with one input called “Up” such that when “Up” equals 1, the machine counts 2, 3, 4, 5, 6, and repeat. If the “Up” input equals 0, the machine counts down 6, 5, 4, 3, 2, and repeat. Show the State Transition Diagram, State Transition table, K-maps, and equations assuming JK flip flops and AND/OR/NOT combinational logic. Make sure to indicate on your State Transition Diagram what happens if the system initially is in one of the...
Design an embedded system using MSP430 to control a traffic light system. It is included a...
Design an embedded system using MSP430 to control a traffic light system. It is included a complete design description of a traffic light system to help you in your design. Show the hardware schematics and the software needed to complete your design.
Using Behavorial VHDL, design a 4-bit up/down counter.
Using Behavorial VHDL, design a 4-bit up/down counter.
CSC MUST BE IN JAVA Design a program as per the following information using the accompanying...
CSC MUST BE IN JAVA Design a program as per the following information using the accompanying data file. Here is the datafile: sodaSalesB.dat Make sure the program compiles and that you include pseudo code. The assignment is worth 100 points.  (Lack of pseudo code will cost you 15pts) You have been asked to produce the report below. This report will tell the company how sales are going. You will read the file named sodasales.dat The values are the brand name, number...
Using c++ Design a system to keep track of employee data. The system should keep track...
Using c++ Design a system to keep track of employee data. The system should keep track of an employee’s name, ID number and hourly pay rate in a class called Employee. You may also store any additional data you may need, (hint: you need something extra). This data is stored in a file (user selectable) with the id number, hourly pay rate, and the employee’s full name (example): 17 5.25 Daniel Katz 18 6.75 John F. Jones Start your main...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT