A diving board of length 3.00 m is supported at a point 1.00 m from the end, and a diver weighing 480 N stands at the free end (Figure 1) The diving board is of uniform cross section and weighs 300 N. <img src="//img.wizedu.com/questions/a8b36c00-04c5-11ed-b16c-afa5be64dbe5.png" title="1657948227361240.png" alt="image.png"/>Find the magnitude of the force at the support point. Find the direction of the force at the support point. Find the magnitude of the force at the left-hand end. Find the direction of the force at the left-hand end.

Question

In: Physics

A diving board of length 3.00 m is supported at a point 1.00 m from the end

A diving board of length 3.00 m is supported at a point 1.00 m from the end, and a diver weighing 480 N stands at the free end (Figure 1) The diving board is of uniform cross section and weighs 300 N.

Find the magnitude of the force at the support point.

Find the direction of the force at the support point.

Find the magnitude of the force at the left-hand end.

Find the direction of the force at the left-hand end.

Expert Solution

genius_generous answered 2 years ago

A diving board of length 3.00 m is supported at a point 1.00 m from the...

A diving board of length 3.00 m is supported at a point 1.00 m from the end, and a diver weighing 520 N stands at the free end. The diving board is of uniform cross section and weighs 295 N. 1) Find the magnitude of the force at the support point. 2) Find the direction of the force at the support point. (upward or downward) 3) Find the magnitude of the force at the left-hand end. 4) Find the direction...

A 55-kg diver stands at the end of a diving board located 10 m above the...

A 55-kg diver stands at the end of a diving board located 10 m above the water level. The diving board is held down at one end by an anchor bolt. The fulcrum is located at 1.4 m from the bolt and the total length of the board is 3.9 m. Draw a free body diagram showing the forces acting on the diver. Calculate the torque that she exerts on the board with respect to the fulcrum. Neglect the mass of the...

P1.- A high diver leaves the end of a 5.0 m high diving board and strikes...

P1.- A high diver leaves the end of a 5.0 m high diving board and strikes the water 1.3 s later, 3.0 m beyond the end of the board. Considering the diver as a particle, determine: (a) her initial velocity Vo (b) the maximum height reached, (c) the velocity Vf with which she enters the water. P2.- A rollercoaster moves 200 ft horizontally and then rises 135 ft at an angle of 30 degrees above the horizontal. It next travels...

1. A rod of uniform density and weight W=120N has length L=1.00 m and is supported...

1. A rod of uniform density and weight W=120N has length L=1.00 m and is supported at two points, under the 10 cm point and under the 70 cm point. The support at 10 cm exerts a force NL on the rod and the support at 70 cm exerts a force NR on the rod, both forces being in the vertical direction. (a) Use the conditions of static equilibrium to find the values of NL and NR. (b) In order...

A diver springs off a 10 m high diving board. If he leaves the board with...

A diver springs off a 10 m high diving board. If he leaves the board with an initial upward velocity of 5.0 m/sec, a.) How high will he rise above the diving board? b.) How long will he be in the air before he hits the water?

1) A diver of mass 43.0kg stands on the end of a uniform diving board over...

1) A diver of mass 43.0kg stands on the end of a uniform diving board over the water. The board is 7.00m long and has a mass of 75kg. The end of the board opposite the diver is attached to the platform. The bounce of the board is adjusted by a roller underneath that can be moved back and forth. The roller is 2.80 m from the fixed end of the board. a) What are the magnitude and the direction...

A 92.0-N uniform, horizontal board 14.0 m long rests on two supports, each 1.00 m from...

A 92.0-N uniform, horizontal board 14.0 m long rests on two supports, each 1.00 m from the end of the board. A 385-N block is placed on the board 3.00 m from one end as shown below. Find the force exerted on the board by each support.

Two movers carry a refrigerator by placing it on a light board 3.00 m long. The...

Two movers carry a refrigerator by placing it on a light board 3.00 m long. The refrigerator is a cube of 1 cubic meter with it’s center of mass at the center of the cube. One person lifts at one end of the board with a force of 369 N, and the other lifts the opposite end with a force of 711 N. (a) (3 points) What is the weight of the refrigerator, and where along the board is its...

A flaggpole of mass 5km and length 3.0 m is hinged at a wall and supported...

A flaggpole of mass 5km and length 3.0 m is hinged at a wall and supported by a horizontal position by a cable affected to the flagpole at 2.0 M from the wait. The cable makes an angle of 25 with the horizontal. An iron plate of mass 1.5 kg is hanged at the free end of the flagpole. A. what is the tension in the cable. B. What is the horizontal force excerted on the hinge of the wall....

A lead ball is dropped into a lake from a diving board 12.0 ft above the...

A lead ball is dropped into a lake from a diving board 12.0 ft above the water. It hits the water with a certain velocity and then sinks to the bottom with this same constant velocity. If it reaches the bottom 5.30 s after it is dropped, how deep is the lake (in feet)?