Question
In: Mechanical Engineering
A strip of elastomer 1 cm×1 cm×10 cm is stretched to 25 cm length at T...
A strip of elastomer 1 cm×1 cm×10 cm is stretched to 25 cm length at T =25C, a stress of 1.5 MPa being required
(a) Assuming a tetrafunctional crosslinking mode, how many moles of network chains are there per cubic centimeter?
(b) What stress is required to stretch the sample to only 15 cm at T = 25C?
(c) What stress is required to stretch the sample to 25 cm length at 100C?
Solutions
samet mamat answered 2 years agoRelated Solutions
A piano wire with mass 2.60g and length 84.0 cm is stretched with a tension of...
A piano wire with mass 2.60g and length 84.0 cm is stretched with a tension of 25.0 N. A wave with frequency 120.0 Hz and amplitude 1.6 mm travels along the wire. Calculate the average power carried by the wave. What is the average power if the wave amplitude is halved?
An unstretched spring is 30 cm long. When the spring is stretched to a total length...
An
unstretched spring is 30 cm long. When the spring is stretched to a
total length of 60cm, it supports transverse waves moving at 4.5
m/s. How fast will waves travel in this spring if it is stretched
to 90cm?
An unstretched spring is 30 cm long. When the spring is stretched to a total length...
An
unstretched spring is 30 cm long. When the spring is stretched to a
total length of 60cm, it supports transverse waves moving at 4.5
m/s. How fast will waves travel in this spring if it is stretched
to 90cm?
Question 1 a) A cylindrical feedstock of length = 35.4 cm and diameter = 10 cm...
Question 1
a) A cylindrical feedstock of length = 35.4 cm and diameter = 10
cm is subjected to turning using a high speed steel tool. For this
tool, n and C values in the Taylor tool life equation are 0.125 and
70 m/min, respectively. The cost for hiring an operator and using
the machine tool are $82 per hour. The tooling cost per edge of
cutting is $5. Loading and unloading the part on to the machine
takes about...
1. a intensity of 2.6 to circulates for a solenoid of 25 cm of length shaped...
1.
a intensity of 2.6 to circulates for a solenoid of 25 cm of length
shaped for 3400 turns of 6 cm of radio. Determine: to. The field
magnetic in the internal of solenoid if this is completely empty.
b. The field magnetic in the internal of solenoid if in the
internal of this there is a material with permeability magnetic
relative μr = 1150. c. The length of wire that is has used for its
manufacture.
The tube length in a certain compound microscope is 25 cm. The focal length of the...
The tube length in a certain compound microscope is 25
cm. The focal length of the objective lens is 2.1 cm. The clearest
image is formed when an object of height 1 mm is placed at a
distance of 2.3 cm from the objective lens. Determine: (i) The
position of the intermediate image, (ii) the focal length of the
eye piece, that will place the final image at the near-point, (iii)
the total magnification of the microscope and the height...
A solenoid of radius 3.5 cm has 800 turns and a length of 25 cm. (a)...
A solenoid of radius 3.5 cm has 800 turns and a length of 25
cm.
(a) Find its inductance.
mH
(b) Find the rate at which current must change through it to
produce an emf of 90 mV. (Enter the magnitude.)
A/s
A string of total mass 3.00×10-2kg is stretched to a length of 4.9m by applying a...
A string of total mass 3.00×10-2kg is stretched to a
length of 4.9m by applying a tension of 14.20N. You flick the end
of the string, sending a pulse to the far end. It reflects back to
your hand.
PLEASE SHOW WORK, I REALLY WANT TO KNOW HOW TO DO
THIS!
A) How fast is the pulse moving?
B) How much time does it take for the pulse to make the round
trip (from your hand to the other end...
A long metalic strip 1.8 cm wide and 1.0 mm thick is placed in a 1.4-T...
A long metalic strip 1.8 cm wide and 1.0 mm thick is placed in a
1.4-T magnetic field as in the (Figure 1). When a steady current of
17 A passes through it, the Hall emf is measured to be 1.02 μV.
Figure1 of 1 Part A Determine the drift velocity of the electrons.
Express your answer to two significant figures and include the
appropriate units. vd v d = Previous AnswersRequest Answer
Incorrect; Try Again; 5 attempts remaining Part...
A mass m = 1 kg is suspended from a spring that is stretched 1 cm...
A mass m = 1 kg is suspended from a spring that is stretched 1
cm
under the influence of the weight of this mass. Now a periodic
force is applied
external of F (t) = 200 cos (vt) on the mass, which was initially
in
static balance. Disregarding all friction, get a relationship
for
position of the mass as a function of time, x (t). Also determine
the value of
ω which will cause resonance to occur
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- An investor is considering purchasing a Treasury bond with a 20 year maturity, an 8% coupon...
- Write a program that copies the contents of one file to a destination file. This program...
- how to conduct a marketing mix for 3d crest white strips
- Is big data analytics used for service innovation at Amazon? If so, please write a brief...
- A shrink-fit process has been used to enhance the pressure carrying capacity of a cylinder. During...
- Ten-year zero coupon bonds issued by the U.S. Treasury have a face value of $1,000 and...
- The Blossom Department of Transportation has issued 25-year bonds that make semiannual coupon payments at a...
ADVERTISEMENT