Question

In: Mechanical Engineering

The fatigue life of a component is 5 x 105 cycles at 200MPa and 2 x...

The fatigue life of a component is 5 x 105 cycles at 200MPa and 2 x 105 cycles at 400MPa. If this component is subjected to the loading sequence: 100 cycles at 200 MPa and 100 cycles at 400 MPa, which repeats indefinitely, which one of the answers below is closest to the component’s expected fatigue life? Pick one answer only.

A. 2.86 x 105 cycles

B. 2.93 x 105 cycles

C. 3.23 x 105 cycles

D. 3.52 x 105 cycles

Solutions

Expert Solution

thank you.....


Related Solutions

2.How can you correlate the number of cycles to fatigue and applied loads with the fatigue...
2.How can you correlate the number of cycles to fatigue and applied loads with the fatigue behaviors. Low cycle fatigue has lower load and low number of cycles to failure None High cycle fatigue has lower loads and lower number of cycles to failure Low cycle fatigue has high loads and high number of cycles to failure High cycle fatigue has higher loads and relatively low number of cycles to failure
5. Describe and illustrate all of the following life cycles: mosses, ferns, gymnosperms, and angiosperms.
5. Describe and illustrate all of the following life cycles: mosses, ferns, gymnosperms, and angiosperms.
Define fatigue. Mention some of the important parameters by which fluctuating stress cycles are characterized.?
Define fatigue. Mention some of the important parameters by which fluctuating stress cycles are characterized.?
1. Look at the pine life cycle and compare it to the life cycles of the...
1. Look at the pine life cycle and compare it to the life cycles of the seedless vascular plants. Emphasize the main differences between the life cycles. 2. Observe the pine microsporangiate strobili (male cones). a. Do you think the male cones are persistent? Why? b. How is this trait related to the type of fertilization utilized by pines? 3. Now look at a slide of pine pollen. a. What structures do they have that might help their dispersal? 4....
The life time X of a component, costing $1000, is modelled using an exponential distribution with...
The life time X of a component, costing $1000, is modelled using an exponential distribution with a mean of 5 years. If the component fails during the first year, the manufacturer agrees to give a full refund. If the component fails during the second year, the manufacturer agrees to give a 50% refund. If the component fails after the second year, but before the fifth year the manufacturer agrees to give a 10% refund. (a) What is the probability that...
3. Give an example of a real component or structure in which fatigue is an important...
3. Give an example of a real component or structure in which fatigue is an important factor to consider during design. (2 points) 4. From the answer to problem 3, if your design were not economically limited, what factor that affects fatigue resistance, would you be willing to reinforce for the integral good of the part? (4 points) Prepare your answer judiciously.
12) What are the 5 component of effect IT Governance? For one component, identify 2-3 indicators...
12) What are the 5 component of effect IT Governance? For one component, identify 2-3 indicators of possible misalignment between the organization and IT as well as the associated risks. Describe at least 3 activities/questions that an internal auditor could perform/ask in order to evaluate controls related to each risk and also describe the associated evidence the auditor would seek
Linear-elastic fracture mechanics method for fatigue life estimation is more appropriate for which stage(s) of fatigue?
Linear-elastic fracture mechanics method for fatigue life estimation is more appropriate for which stage(s) of fatigue?
Explain the differences in the life cycles of plants vs. humans
Explain the differences in the life cycles of plants vs. humans
Chapter 5 also introduces the strategic implications of various "Industry Life-Cycles". Please address the following questions...
Chapter 5 also introduces the strategic implications of various "Industry Life-Cycles". Please address the following questions with ORIGINAL thought (not from the book... not from a classmate [current or previous] ... not from the internet... ) 1. Can you give an example of a firm that benefited from being a “first mover” in their industry? ... (Briefly explain) 2. How about an example of a firm that was a "late-mover" (or perhaps even better, a "fast-follower"?) ... (Briefly explain)   3....
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT