Millwrights in a factory need to suspend a machine weighting 10500ib from a beam having a...

Millwrights in a factory need to suspend a machine weighting 10500ib from a beam
having a span of 12.0 ft so that a truck can back under it. Assume that the beam is simply
supported as its ends. The load is applied by the cables , each 3.0ft from a support . Design
a suitable beam. Consider standard wooden or steel beams or 1 of your own design.

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

A loud factory machine produces sound having a displacement amplitude in air of 1.00 μm,

A loud factory machine produces sound having a displacement amplitude in air of 1.00 μm, but the frequency of this sound can be adjusted. In order to prevent ear damage to the workers, the maximum pressure amplitude of the sound waves is limited to 10.0 Pa. Under the conditions of this factory, the bulk modulus of air is 1.23×105 Pa . The speed of sound in air is 344 m/s.Part AWhat is the highest-frequency sound to which this machine can...

It is known that of the articles produced by a factory, 20% come from Machine A,...

It is known that of the articles produced by a factory, 20% come from Machine A, 30% from Machine B, and 50% from Machine C. The percentages of satisfactory articles among those produced are 95% for A, 85% for B and 90% for C. An article is chosen at random. (a) What is the probability that it is satisfactory? (b) Assuming that the article is satisfactory, what is the probability that it was produced by Machine A? (c) Given that...

Discuss the benefits of share buybacks. While having lots of firms suspend buybacks under current market conditions, advise with reasonings if SoftBank should suspend their share buyback plan?

“SoftBank Plans $4.8 Billion Share Buyback Following Pressure From Elliott; The proposed share buyback isn't as large as the one urged by the activist shareholderWall Street Journal; New York, N.Y. [New York, N.Y] 13 Mar 2020.TOKYO—SoftBank Group Corp. said it would spend as much as ¥500 billion ($4.8 billion) to buy back up to 7% of its own shares, following plunging stock prices and a pressure campaign from one of the world's most aggressive activists.”“Stock-Buyback Plans Shrink; The new coronavirus...

Rinnai Tasty factory is one of the Juices manufacturer factory having an association with more than...

Rinnai Tasty factory is one of the Juices manufacturer factory having an association with more than 2000 retailers and wholesalers across the country. It has more than 3000 employees including the manager, supervisor, mechanics, engineers, cleaner, etc. Most of the employees working as mechanics, engineers, cleaner at a lower level in the factory were residents of a small village of Nizwa, Sultanate of Oman. Rinnai Tasty factory has been into controversies for its many unethical practices. It has been criticized...

A machine in a factory has an error rate of 10 parts per 100. The machine...

A machine in a factory has an error rate of 10 parts per 100. The machine normally runs 24 hours a day and produces 30 parts per hour. Yesterday the machine was shut down for 4

From the information below I need to find the best predicted probability of having a new...

From the information below I need to find the best predicted probability of having a new client give the highest level of satisfaction. The first item you want to highlight is your customer satisfaction record. Over the past 18 months of employment you have worked with 24 clients, and according to the customer satisfaction surveys all clients are asked to take after their contract is completed, 22 of them rated you with the highest level of satisfaction. Use this information...

1.A reinforced concrete beam having a width of 500 mm and an effective depth of 750...

1.A reinforced concrete beam having a width of 500 mm and an effective depth of 750 mm is reinforced with 5 – 25mm φ. The beam has simple span of 10 m. It carries an ultimate uniform load of 50 KN/m. Use f’c = 28 MPa, and fy = 413 MPa. Determine the value of fs in MPa. Express your answer in two decimal places. 2.A reinforced concrete beam having a width of 500 mm and an effective depth of...

Design for flexure a beam 12 ft in length, having a uniformly distributed dead load of...

Design for flexure a beam 12 ft in length, having a uniformly distributed dead load of 1 kip/ft, a uniformly distributed live load of 1 kip/ft, and a concentrated dead load of 8.4 kips a distance of 5 ft from one support Show all the steps. (LRFD) Fy = 50k/in2 E = 29,000k/in2

Q6: A cantilever beam having span ‘L’ m was subjected to a uniformly distributed load of...

Q6: A cantilever beam having span ‘L’ m was subjected to a uniformly distributed load of magnitude 8 kN/m for a distance of ‘0.6 L’ from the free end and two concentrated loads one of magnitude 15 kN at a distance ‘0.25 L’ m from the free end while the other of magnitude ‘22’ kN at a distance ‘0.6 L’ m from the free end respectively. It was observed that the maximum bending moment acting on the beam is equal...

Q1: A cantilever beam having span ‘L’ m was subjected to a uniformly distributed load of...

Q1: A cantilever beam having span ‘L’ m was subjected to a uniformly distributed load of magnitude 8 kN/m for a distance of ‘0.6 L’ from the free end and two concentrated loads one of magnitude 15 kN at a distance ‘0.25 L’ m from the free end while the other of magnitude ‘22’ kN at a distance ‘0.6 L’ m from the free end respectively. It was observed that the maximum bending moment acting on the beam is equal...

Subjects