Question
In: Civil Engineering
A singly reinforced beam 47.2cm×28.3cm, is provided with 5 bar of each diameter 2.2cm. determine: 1)...
A singly reinforced beam 47.2cm×28.3cm, is provided
with 5 bar of each diameter 2.2cm. determine:
1) percentage of excess steel used
2) moment of resistance
3)Actual stress develop in steel and concrete
4) maximum allowable central load that can be put if it is carrying
a uniformly distributed load of 850kg/m over a simple supported
length of 3.2m.
(note : we have exam right now please help please ???)
Solutions
Ally Wells answered 1 year agoRelated Solutions
A singly reinforced beam 47.2 cm × 28.3 cm, is provided with 5 bar of each...
A singly reinforced beam 47.2 cm × 28.3 cm, is
provided with 5 bar of each diameter 2.2 cm . determine:
(1) Percentage of excess steel used
(2) moment of resistance
(3)actual stress develop in steel and concrete
(4) maximum allowance central load that can be put if it is
carrying a uniformly distributed load of 850kg/m over a simply
supported length of 3.2m.
1_List the circumstances in which a singly reinforced and doubly reinforced beam sections are used in...
1_List the circumstances in which a singly reinforced
and doubly reinforced beam sections are used in a structure.
2_State Necessity of Reinforcement in R.C.C Structures.
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm...
1. A 3.5 m clear span singly reinforced cantilever
beam has a rectangular section of b=300mm and D=500
mm is reinforced with 2 bars of 32 mm diameter and 1 bar of 25mm
diameter in the tension zone. The
live load taken by the beam is 19 kN/m. Check if the beam is safe
to carry the above load . Use M25
and Fe500.
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm...
1. A 3.5 m clear span singly reinforced cantilever
beam has a rectangular section of b=300mm and D=500
mm is reinforced with 2 bars of 32 mm diameter and 1 bar of 25mm
diameter in the tension zone. The
live load taken by the beam is 19 kN/m. Check if the beam is safe
to carry the above load . Use M25
and Fe500.
Determine shear force resisted by a Reinforced concrete beam of size 230 x 450 mm simply...
Determine shear force resisted by a Reinforced concrete beam of
size 230 x 450 mm simply supported over an effective span of 5.5 m
which is reinforced with 4 - #16 mm bars in tension, supported with
#8 mm dia 2-legged stirups @ 150 mm c/c upto 0.25 L from end
Support and #8 mm dia 2-legged stirups @ 100 mm c/c at mid-span.
consider moderate exposed conditions, use M20 grade of concrete and
Fe 415 grade of HYSD steel.
1.A reinforced concrete beam having a width of 500 mm and an effective depth of 750...
1.A reinforced concrete beam having a width of 500 mm and an
effective depth of 750 mm is reinforced with 5 – 25mm φ. The beam
has simple span of 10 m. It carries an ultimate uniform load of 50
KN/m. Use f’c = 28 MPa, and fy = 413 MPa. Determine the value of fs
in MPa. Express your answer in two decimal places.
2.A reinforced concrete beam having a width of 500 mm and an
effective depth of...
Determine the required size (area, nominal diameter, and Bar No.) of the three reinforcing steel bars...
Determine the required size (area, nominal diameter, and Bar
No.) of the three reinforcing steel bars used in a 9 in. wide and
12 in. deep concrete beam to assure the beam fails in compression
of the concrete and the steel reinforcement reaches its yield
strength at the same load. Assume that the ultimate compressive
strength of the concrete is 4,000 psi and the yield strength of the
steel is 30,000 psi.
1. Considering singly linked list, be able to determine if inserting nodes at the end of...
1. Considering singly linked list, be able to determine if
inserting nodes at the end of a LinkedList is less time-efficient
than inserting them at the front of the list.
2. Be able to differentiate between the data structures Stack,
Queue, and Linked List.
3. Determine between the acronyms LIFO and FIFO, and be able to
give one real life example where each is applicable
Steam enters a horizontal 15-cm-diameter pipe as a saturated vapor at 5 bar with a velocity...
Steam enters a horizontal 15-cm-diameter pipe as a saturated
vapor at 5 bar with a velocity of 10 m/s and exits at 4.5 bar with
a quality of 95%. Heat transfer from the pipe to the surroundings
at 300K takes place at an average outer surface temperature of 400
K. For operation at steady state, determine
(a) the velocity at the exit, in m/s.
(b) the rate of heat transfer from the pipe, in
kW.
(c) the rate of entropy...
Consider an electron beam of uniform circular cross-section with a diameter of 1 mm. The electrons...
Consider an electron beam of uniform circular cross-section with
a diameter of 1 mm. The electrons are accelerated from the cathode
to the anode, which are separated by 1 m. The electrons are
generated at the cathode and therefore have negligible velocity at
this position. The electrons accelerate at a rate of 108 ?/?2
between the cathode and anode. The current density at the anode is
104 ?/?2 .
Find the current density as a function of position between the...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- 38. A contract with an illegal principal objective is typically which of the following? Answers: A....
- Explain how advances in technology can force a software subsystem to undergo change or run the...
- Discuss whether you agree or disagree on whether you think E-mails need to be managed and...
- b. Do any unions represent employees in Microsoft? Describe which unions are involved. c. Have there been...
- Look up and use each of these Linux commands. (Each command will have two parts) Summarize...
- What was Lincoln 10 percent plan and what problems did it present?
- A cantilever beam 4m long carries a uniform load of 3.5 kN/m over a portion 1.5m...
ADVERTISEMENT