Question

In: Mechanical Engineering

A two-cylinder, four-stroke gas engine has a bore of 380 mm and a stroke of 585...

A two-cylinder, four-stroke gas engine has a bore of 380 mm and a stroke of 585 mm. At 240 rev/min the torque developed is 11.86 kNm. If the engine is supplied with a mixture of gas and air in the proportion of 1 to 7 by volume. The estimated volumetric efficiency is 85% and the Qnet,p of the gas is 38.6 MJ/m3. Calculate the brake thermal efficiency of the engine.

Solutions

Expert Solution

samet mamat answered 2 years ago
Next > < Previous

Related Solutions

A ship is fitted with six-cylinder CI engine of 75 mm bore and 100 mm stroke....
A ship is fitted with six-cylinder CI engine of 75 mm bore and 100 mm stroke. The engine has a brake power output of 110 kW at 370 rpm. The volumetric efficiency at this operating condition, referred to ambient conditions, of 1.013 bar and 20˚C is 80%. You have just fitted a mechanically driven supercharger which has isentropic efficiency of 0.7 and the pressure ration of 1.6. The supercharged version of the engine has a volumetric efficiency of 100% referred...
A 4 cylinder 4 stroke 2.3 L diesel engine with bore = 12.4 cm and stroke...
A 4 cylinder 4 stroke 2.3 L diesel engine with bore = 12.4 cm and stroke =11 cm. the crank radius is 6.2 cm and with a connecting rod length 15 cm. the compression ratio of the engine is 20 and the combustion efficiency is 97.3 %. If the average speed of the car over the running life of the engine is 56 km/h and the total traveled distance of the engine is 250000 km. note: use the engine speed...
A single-cylinder, four stroke research engine operates on Otto cycle. The specification of the engine is...
A single-cylinder, four stroke research engine operates on Otto cycle. The specification of the engine is shown as below:- Displacement volume of the cylinder = 540 cm3 Clearance volume of the cylinder = 60 cm3 Minimum temperature = 200°C Minimum pressure = 200 kPa Net work output = 1000 kJ/kg Sketch the process on a P-V diagram and by using constant specific heat at room temperature, determine: i) the temperature and pressure at each process, ii) the thermal efficiency of...
A single-cylinder, four stroke research engine operates on Otto cycle. The specification of the engine is...
A single-cylinder, four stroke research engine operates on Otto cycle. The specification of the engine is shown as below:- Displacement volume of the cylinder = 560 cm3 Clearance volume of cylinder = 70 cm3 Minimum temperature = 200°C Minimum pressure = 200 kPa Net work output = 1000 kJ/kg Sketch the process on a P-V diagram and by using constant specific heat at room temperature, determine: 1) the temperature and pressure at each process, 2) the thermal efficiency of the...
A four-cylinder four-stroke engine is operating at a bmep of 2 bar. The pressure at inlet...
A four-cylinder four-stroke engine is operating at a bmep of 2 bar. The pressure at inlet valve closure is 0.37 bar, and the fmep is 0.8 bar. Assuming that the engine gross indicated efficiency is unchanged, verify that disablement of the valves on two cylinders would reduce the fuel consumption by about 13 per cent compared with about an 8 per cent fuel saving if the fuel was not supplied to two cylinders. Assume that the gross imep is proportional...
A cylinder with a 20 inch stroke and a 4:3 area ratio with a bore of...
A cylinder with a 20 inch stroke and a 4:3 area ratio with a bore of 6 inch diameter takes 4 seconds to extend. What is the flow required for extention?
1. An aluminum air-cooled engine cylinder head for a single cylinder, 2-stroke engine is to be...
1. An aluminum air-cooled engine cylinder head for a single cylinder, 2-stroke engine is to be die-cast. The overall diameter of the cylinder head is 101.6 mm. If the projected plan area of the runners and gating system is 100 mm2 and the casting pressure is 10 MPa (1500 psi), what minimum locking force is required for the die-casting machine in kN.
A test was conducted on a 4-stroke four cylinder engine having 6.9 cm diameter and 8.9...
A test was conducted on a 4-stroke four cylinder engine having 6.9 cm diameter and 8.9 cm stroke. The fuel supply to the engine is 0.065 kg/min. The B.P measurements are given below with constant engine speed of 300 rpm: With all cylinder firing = 16.9 kW Cut off at 1st cylinder = 8.46 kW Cut off at 2nd cylinder = 8.56 kW Cut off at 3rd cylinder = 8.6 kW Cut off at 1st cylinder = 8.46 kW If...
1) A four-stroke diesel engine has a piston diameter of 16.5 cm and a stroke of...
1) A four-stroke diesel engine has a piston diameter of 16.5 cm and a stroke of 27 cm. The compression ratio is 14.3, the cut-off 4.23% of the stroke and the mean effective pressure 4.12 bar. The engine speed is 264 rev/min and the fuel consumption is 1.076 kg of oil per hour, having a calorific value of 39150 kJ/kg. Calculate the relative efficiency of the engine 2). A diesel engine has a brake thermal efficiency of 30%. If the...
During the power stroke in a four-stroke automobile engine, the pis-ton is forced down as the...
During the power stroke in a four-stroke automobile engine, the pis-ton is forced down as the mixture of combustion products and air undergoes an adiabatic expansion. Assume (1) the engine is running at 2500 cycles/min; (2) the pressure immediately before the expansion is 20.0 atm; (3) the volumes of the mixture immediately before and after the expansion are 50.0 cm3and 400 cm3, respectively ; (4) the time interval for expansion is one-fourth that of the total cycle; and (5) the...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT