Question

In: Math

A dam is inclined at an angle of 30° from the vertical and has the shape...

A dam is inclined at an angle of 30° from the vertical and has the shape of an isosceles trapezoid 200 ft wide at the top and 100 ft wide at the bottom and with a slant height of 140 ft. Find the hydrostatic force on the dam when it is full of water. (Round your answer to the nearest whole number. Recall that the weight density of water is 62.5 lb/ft3.)

Solutions

Expert Solution


Related Solutions

A dam is inclined at an angle of 30° from the vertical and has the shape...
A dam is inclined at an angle of 30° from the vertical and has the shape of an isosceles trapezoid 40 ft wide at the top and 20 ft wide at the bottom and with a slant height of 30 ft. Find the hydrostatic force on the dam when it is full of water. (Round your answer to the nearest whole number. Recall that the weight density of water is 62.5 lb/ft3.)
1. A 4 kg mass is resting on a ramp inclined at an angle of 30...
1. A 4 kg mass is resting on a ramp inclined at an angle of 30 degrees with respect to the horizontal. A string is attached to the 4 kg mass and passes over a frictionless pulley and is connected to a 5 kg mass hanging over the side. If the coefficient of friction between the ramp and the 4 kg mass if 0.3 find; A) The acceleration of both masses B) The tension in the string C) Find the...
5. Draw a dam shape, show its parts on the shape, and illustrate the geological factors...
5. Draw a dam shape, show its parts on the shape, and illustrate the geological factors affecting the dam location selection.
A 5.75-kg block is sent up a ramp inclined at an angle θ = 32.5° from...
A 5.75-kg block is sent up a ramp inclined at an angle θ = 32.5° from the horizontal. It is given an initial velocity v0 = 15.0 m/s up the ramp. Between the block and the ramp, the coefficient of kinetic friction is μk = 0.382 and the coefficient of static friction is μs = 0.687. How far up the ramp (in the direction along the ramp) does the block go before it comes to a stop? ___________m
A 10 kg block is placed on an inclined plane that is at an angle of...
A 10 kg block is placed on an inclined plane that is at an angle of 30 degrees with respect to the horizontal. THe coefficient of kinetic friction between the block and the plane is .1. The block is released from rest at 5m above a spring that is also lying on the plane. The spring has a constant of 50 N/m. What is the max compression of the spring?
The face of a dam is vertical to a depth of 6m below the water surface...
The face of a dam is vertical to a depth of 6m below the water surface and then slopes at an angle of 30◦ to the vertical. If the depth of the water is 15m, specify completely the resultant force per meter run acting on the face of the dam.
It is clear that the angle of section of a cone will affect the shape of...
It is clear that the angle of section of a cone will affect the shape of the resulting ellipse or hyperbola. We know that the shape is determined by the eccentricity. Find explicitly a relation between the two.
A 50 kg crate slides down a ramp that is inclined by 30 degrees from the...
A 50 kg crate slides down a ramp that is inclined by 30 degrees from the horizontal. The acceleration of the crate parallel to the surface of the ramp is 2.0m/s^2, and the length of the ramp is 10m. Determine the kinetic energy accumulated by the crate when it reaches the bottom of the ramp if it started from rest at the top of the incline. Calculate the amount of energy lost by the crate due to friction in its...
A 5.35-kg box is pulled up a ramp that is inclined at an angle of 33.0°...
A 5.35-kg box is pulled up a ramp that is inclined at an angle of 33.0° with respect to the horizontal, as shown below. The coefficient of kinetic friction between the box and the ramp is 0.165, and the rope pulling the box is parallel to the ramp. If the box accelerates up the ramp at a rate of 2.09 m/s2, what must the tension FT in the rope be? Use g = 9.81 m/s2 for the acceleration due to...
A block of mass m1 = 3.27 kg on a frictionless plane inclined at angle ?...
A block of mass m1 = 3.27 kg on a frictionless plane inclined at angle ? = 31.2
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT