) A wet multiple-disc clutch with sintered linings is required to transmit 120 Nm of torque...

) A wet multiple-disc clutch with sintered linings is required to transmit 120 Nm of torque at 1000 rev/min. The axial force is created when 6 helical compression springs deflect 5 mm. Each spring has a spring constant k = 142 N/mm. Assuming uniform wear, determine :- (i) the outside and inside diameters if ri = 0.577 ro . (ii) the number of discs required. (iii) the maximum power that can be transmitted

Solutions

Expert Solution

samet mamat answered 1 year ago

Next > < Previous

Related Solutions

A multi-disc wet clutch is to transmit 120 Nm of torque at 1000 rpm using sintered...

A multi-disc wet clutch is to transmit 120 Nm of torque at 1000 rpm using sintered friction material. (i) Assuming uniform wear, find the outside and inside diameters required if ri = 0.577ro. (ii) What is the power transmitted? (iii) Using the diameters found in (i), determine the power transmitted when the clutch is new.

The torque. T Nm, required to rotate shafts of different diameters, D mm, on a machine...

The torque. T Nm, required to rotate shafts of different diameters, D mm, on a machine has been tested and recorded below. Use the method of least squares to determine the linear regression equation that relates the torque to the diamter. Use 3 decimal places for the figures D (mm) 1 5 11 14 20 24 T (Nm) 1.8 4.2 7.9 9.6 12.9 15.3 ?=___D+ ___Nm

A certain engine develops an output torque of 1800 + 200sin2?? Nm, where ? is the...

A certain engine develops an output torque of 1800 + 200sin2?? Nm, where ? is the crank angle measured from some datum. This engine drives a machine which requires a driving torque of 1800 + 300sin?? Nm. The rotating parts have a mass of 100 kg, with a radius of gyration of 0.25 m. The maximum speed of the rotating parts is observed to be 250 rev/min. a) Sketch both the driving and load torque curves on the same axes...

from a certain engine measurements are taken of the torque m in Nm with increasing speed...

from a certain engine measurements are taken of the torque m in Nm with increasing speed (rounds per minute rpm)results are written below. rpm 2000 2500 3000 3500 4000 4500 5000 M. 65 92 139 150 170 175 218 the model parameters for simple transgression in least squares sense are: y intercept = -19.8571 and slope = 0.0469 SSE = 749.71 1. what is the average torque at 3500 rpm? 2. what is the confidence interval for slope beta1 with...

the novel coronavirus is a spherical particle of outer diameter 120 nm, while streptococcus bacteria are...

the novel coronavirus is a spherical particle of outer diameter 120 nm, while streptococcus bacteria are 1.8 ? μ m in diameter. The virus is also found to be slightly more dense than the bacteria, with the density of coronavirus being 1.1 kg/L and that of strep being 1.1 kg/L. During an infection, both are found in the bloodstream (blood density is 1.0 kg/L; blood viscosity is 3.5*10^-3 pa (a) A sample of blood containing streptococcus is placed in a...

The thickness of a single membrane is about 7 nm. A myelin sheath consists of multiple...

The thickness of a single membrane is about 7 nm. A myelin sheath consists of multiple membranes produced by coils of Schwann cell or oligodendroglia cells. Suppose a myelin sheath results from 100 membranes stacked on top of each other. A) What is the specific capacitance of the myelin? B) If the myelin sheath is a right circular cylinder 1 mm long, what is its total capacitance? C) How much charge does it take to produce a voltage of -70...

Which of the following is NOT a required assumption for the multiple regression model? a The...

Which of the following is NOT a required assumption for the multiple regression model? a The error/randomness in attendance is independent from one game to the next. b The error term has a constant variance for all possible values of Temp, Win%, and OpWin%. c The relationship between Attendance and the slope/intercept parameters is linear. d The variable Temp has a normal distribution.

Which of the following is NOT a required assumption for the multiple regression model? a The...

1. (a)What resolution is required to resolve the Na D lines at 589.0 and 589.5 nm...

1. (a)What resolution is required to resolve the Na D lines at 589.0 and 589.5 nm in first order? (b)A grating contains 1000 lines. Will it resolve two lines of 1500.0 and 499.8 nm in first order if all 1000 lines are illuminated? (c)Please write down three possible dispersive optical layouts. Principles of instrumental analysis

In the context of bonds, there are multiple components of the required rate of return. Which...

In the context of bonds, there are multiple components of the required rate of return. Which of the following BEST describes the components of the required rate of return? Select one: a. Premiums for interest rate risk, default risk, and liquidity risk b. Real rate of return and a premiums for inflation risk, interest rate risk, default risk, and liquidity risk c. Real rate of return and a premium for inflation

Subjects