A 12.0-kg package in a mail-sorting room slides 2.00 m down a chute that is inclined...

A 12.0-kg package in a mail-sorting room slides 2.00 m down a chute that is inclined at 53.0∘53.0∘ below the horizontal. The coefficient of kinetic friction between the package and the chute’s surface is 0.40.

I know hot to calculate Work for each separate force on the package. But how would you use the Work Kinetic Energy Theorem to find the package's change in kinetic energy?

Thanks!

Expert Solution

genius_generous answered 1 year ago

An 15.0-kg package in a mail-sorting room slides 4.00 mm down a chute that is inclined...

An 15.0-kg package in a mail-sorting room slides 4.00 mm down a chute that is inclined at 59.0 ∘∘ below the horizontal. The coefficient of kinetic friction between the package and the chute's surface is 0.90. 1.Calculate the work done on the package by gravity. Express your answer with the appropriate units. 2.Calculate the work done on the package by the normal force. Express your answer with the appropriate units. 3.What is the net work done on the package? Express...

A block of mass m = 2.1 kg slides down a 36 ° inclined ramp that...

A block of mass m = 2.1 kg slides down a 36 ° inclined ramp that has a height h = 3.1 m. At the bottom, it hits a block of mass M = 7.1 kg that is at rest on a horizontal surface. Assume a smooth transition at the bottom of the ramp. If the collision is elastic and friction can be ignored, determine the distance the mass m will travel up the ramp after the collision.

A block with mass m = 17.2 kg slides down an inclined plane of slope angle...

A block with mass m = 17.2 kg slides down an inclined plane of slope angle 13.8o with a constant velocity. It is then projected up the same plane with an initial speed 4.05 m/s. How far up the incline will the block move before coming to rest?

A 1450 kg car begins sliding down a 12.0 ° inclined road with a speed of...

A 1450 kg car begins sliding down a 12.0 ° inclined road with a speed of 34.0 km/h.The engine is turned off, and the only forces acting on the car are a net frictional force from the road and the gravitational force. After the car has traveled 45.0 m along the road, its speed is 50.0 km/h. (a) How much is the mechanical energy of the car reduced because of the net frictional force? (b) What is the magnitude of...

A 50 kg crate slides down a ramp that is inclined by 30 degrees from the...

A 50 kg crate slides down a ramp that is inclined by 30 degrees from the horizontal. The acceleration of the crate parallel to the surface of the ramp is 2.0m/s^2, and the length of the ramp is 10m. Determine the kinetic energy accumulated by the crate when it reaches the bottom of the ramp if it started from rest at the top of the incline. Calculate the amount of energy lost by the crate due to friction in its...

A human (m=50kg) slides down a ramp inclined at 60 degrees. Determine the acceleration of the...

A human (m=50kg) slides down a ramp inclined at 60 degrees. Determine the acceleration of the human. Assume uk= 0.35

Starting with a speed of 2.50 m/s, a 2.00 kg block slides across a rough horizontal...

Starting with a speed of 2.50 m/s, a 2.00 kg block slides across a rough horizontal surface until it collides with a spring. The spring compresses a distance of 6.00cm as the block comes momentarily to rest. The total distance traveled by the block from its starting position to the position where it comes to rest is 0.800m. If the coefficient of kinetic friction between the block and the surface is 0.100, what is the spring constant of the spring?

In the figure, a small block of mass m = 0.121 kg slides down a frictionless...

In the figure, a small block of mass m = 0.121 kg slides down a frictionless surface from an initial height of h = 0.850 m and then sticks to a uniform vertical rod of mass M = 0.879 kg and length L = 1.83 m. The rod pivots about point O through an angle θ before momentarily stopping. Find θ (in degrees).

A 0.25 kg block slides down a ramp that is 0.6 m tall, 0.8 m long...

A 0.25 kg block slides down a ramp that is 0.6 m tall, 0.8 m long and has a diagonal length of 1.0 m. The block starts at rest and arrives at the bottom with a speed of 1.3m/s. a.) How much heat was created by friction? b.)What is the average frictional force acting on the block? At what rate is kinetic energy being dissipated into heat near the bottom of the ramp? c.)Instead of a block, a cart with...

The diagram shows a mass after it slides down the inclined plane. There is a static...

The diagram shows a mass after it slides down the inclined plane. There is a static friction coefficient of 0.5 and a kinetic friction coefficient of 0.3 between the box and the incline. The angle of the incline is 30 degrees , and the box has a mass of 4 kg . The starting height at the top of the ramp is 0.8 meters (and the distance along the ramp is 1.6 meters ). A) Prove, with numbers, that the...

Question