Question

In: Mechanical Engineering

the plan view of a flat bottomed pontoon with all its sides vertical is shown in...

the plan view of a flat bottomed pontoon with all its sides vertical is shown in figure below. the displacement including the load is 28tons. it is used in sea water for which the relative density can be taken as 1.025.

1.The metacentric height if the mass centre is 400mm above the base.
2.if part of the load having a mass of 1.2 tons is to be moved 500mm to one side of centre , calculate the expected angle of tilt this would cause.

Solutions

Expert Solution


Related Solutions

Draw a Venn diagram for 4 rectangles with all sides vertical or horizontal.
Draw a Venn diagram for 4 rectangles with all sides vertical or horizontal.
Python Please An n-sided regular polygon has all its sides of the same length and all...
Python Please An n-sided regular polygon has all its sides of the same length and all its angles of the same degree. It is also called an equilateral and equiangular polygon. In this activity, you will design a class named RegularPolygon that contains: A private int data attribute named n that defines the number of sides of the polygon. A private float attribute named side that stores the length of the side. The constructor ( __init__ method) that creates a...
All of the sides of a quadrilateral are congruent if it is a rhombus.
The following conditional statement is true.All of the sides of a quadrilateral are congruent if it is a rhombus.Which of the following statements must also be true?a) If not all of the sides of a quadrilateral are congruent, then it is not a rhombus.b) If a quadrilateral is not a rhombus, then all of its sides are not congruent.c) If a quadrilateral is a rhombus, then not all of its sides are congruent.d) If all of the sides of a...
A tank having vertical sides and a bottom area of 100 ft2 is used to store water.
A tank having vertical sides and a bottom area of 100 ft2 is used to store water. To fill the tank, water is pumped into the top at the rate given in the following table. Use Simulink to solve for and plot the water height h(t) for 0 ≤ t ≤10 min.
A hunter is standing on flat ground between two vertical cliffs that are directly opposite one...
A hunter is standing on flat ground between two vertical cliffs that are directly opposite one another. He is closer to one cliff than the other. He fires a gun and, after a while, hears three echoes. The second echo arrives 1.04 s after the first, and the third echo arrives 0.630 s after the second. Assuming that the speed of sound is 343 m/s and that there are no reflections of sound from the ground, find the distance (in...
A hunter is standing on flat ground between two vertical cliffs that are directly opposite one...
A hunter is standing on flat ground between two vertical cliffs that are directly opposite one another. He is closer to one cliff than the other. He fires a gun and, after a while, hears three echoes. The second echo arrives 1.27 s after the first, and the third echo arrives 0.642 s after the second. Assuming that the speed of sound is 343 m/s and that there are no reflections of sound from the ground, find the distance (in...
A square membrane has all four sides (length a) tightly clamped. Some of its vibrational modes...
A square membrane has all four sides (length a) tightly clamped. Some of its vibrational modes are also dampened by a clamp placed at the center of the membrane. Find the first four distinct vibrational frequencies of this "square drum."
What is meant by the term single user view as it applies to flat files, and why is this a problem?
What is meant by the term single user view as it applies to flat files, and why is this a problem? 
Water at 298 K discharges from a nozzle and travels horizontally, hitting a flat, vertical wall.
  (Problem 4.3-3) Water at 298 K discharges from a nozzle and travels horizontally, hitting a flat, vertical wall. The nozzle has a diameter of 12 mm and the water leaves the nozzle with a flat velocity profile at a velocity of 6.0 m/s. Neglecting frictional resistance of the air on the jet, calculate the force in newtons on the wall. Ans. –Rx = 4.059 N Repeat Problem 4.3-3 for the same conditions except that the wall is inclined 45°...
Consider a rhombus that is not square (i.e., the four sides all have the same length, but the angles between sides is not 90°).
Consider a rhombus that is not square (i.e., the four sides all have the same length, but the angles between sides is not 90°). Describe all the symmetries of the rhombus. Write down the Cayley table for the group of symmetries,
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT