An electrostatic precipitator is to be designed to collect dust from a pulverized coal boiler with...

An electrostatic precipitator is to be designed to collect dust from a pulverized coal boiler with an actual flow of 100 m3/s. The effective migration velocity for the flyash is anticipated to be 0.08 m/s. The design gas flow velocity is 1.2 m/s, the plate height is 10 m, and the plate-toplate spacing (2s) is 0.25 m.

a. Determine the number of ducts required to accommodate the flow [-].

b. For an efficiency of 99%, determine the required plate length [m

Solutions

Expert Solution

Ally Wells answered 1 year ago

Next > < Previous

Related Solutions

An industrial coal-fired boiler for process steam is equipped with a 10-year-old electrostatic precipitator (ESP). Changes...

An industrial coal-fired boiler for process steam is equipped with a 10-year-old electrostatic precipitator (ESP). Changes in coal quality have caused stack emissions to be in noncompliance with federal standards for particulate. Two mutually exclusive alternatives have been proposed to rectify this problem (doing nothing is not an option). New Baghouse: Capital investment $1,140,000, Annual operating expenses $73,200. New ESP: Capital Investment $992,500, Annual operating expenses $115,500. The life of both alternatives is 10 years, the effective tax rate is...

Electrostatic precipitator question, I'm designing an electrostatic precipitator (ESP) to capture the particulate matter(fly ash) from...

Electrostatic precipitator question, I'm designing an electrostatic precipitator (ESP) to capture the particulate matter(fly ash) from flue gas at 130C that exits from a coal-fired power plant. My question is: how can i increase the efficiency of the electrostatic precepitator without conditioning the flue gas (ie. injecting so3 or ammonia or water)? what are the alternative ways to increase the efficiency of the ESP? please show references with solution. Thanks

How is a low voltage two stage electrostatic precipitator different from a high voltage single stage...

How is a low voltage two stage electrostatic precipitator different from a high voltage single stage electrostatic precipitator? Explain the operation of a plate type electrostatic precipitator. Include a schematic view of the electrostatic precipitator and mention the size-efficiency relationship.

A 600 MW pulverized coal-fired power plant of 40% efficiency uses coal with an ash content...

A 600 MW pulverized coal-fired power plant of 40% efficiency uses coal with an ash content of 15% and a heating value of 26,700 kJ/kg. Assume 35% of the ash content goes up the stack as particulate matter in the flue gas. The PM emission is controlled by an ESP which has the following efficiencies and weight distribution in the given size ranges. Find the fly ash emitted in g/s.

Suppose you have an electrostatic precipitator currently operating at 90% for 3 µm diameter particles and...

Suppose you have an electrostatic precipitator currently operating at 90% for 3 µm diameter particles and you need to increase the efficiency to 98% to comply with your operating permit. a. Using the Deutsch equation, identify three parameters you could change in order to increase your efficiency. By what percentage would you have to change each separately to achieve your goal? b. Suppose that you decide simply to add a cyclone in series with the ESP in order to reduce...

A steam power plant with boiler use coal fuel with net heat 4000 kcal/kg and boiler...

A steam power plant with boiler use coal fuel with net heat 4000 kcal/kg and boiler efficiency 90%. If steam utrbine from the power plsnt generate power output 100 MW, at condition vapor enter at 10 MPa, 520oC and condensate to saturated liquid at 0.08 bar. If the isentropic efficiency turbine and pump is 90%, then a) Calculate coal required (ton/hour) b) Calculate netto efficiency of the power plant c) Calculate Net Plant Heat Rate (kCal/kWh)

Pollution control equipment for a pulverized coal cyclone furnace is estimated to cost $270,000, 2 years...

Pollution control equipment for a pulverized coal cyclone furnace is estimated to cost $270,000, 2 years from now, an additional $120,000, 4 years from now and, an additional $100,000 5years from now At i=8 % per year,what is the equivalent annual worth of the cash flow series?

1. The law requires coal mine operators to test the amount of dust in the atmosphere...

1. The law requires coal mine operators to test the amount of dust in the atmosphere of the mine. A laboratory carries out the test by weighing filters that have been exposed to the air in the mine. The data in the table shows the repeated weighings of the same filter. 1.09 1.92 2.31 1.79 2.28 1.74 1.47 1.97 0.85 1.24 1.58 2.03 1.7 2.17 2.55 2.11 1.86 1.9 1.68 1.51 1.64 0.72 1.69 1.85 1.82 1.79 2.46 1.88 2.08...

ANSWER ALL 1. A quantity of coal used in a boiler had the following analysis: 82%...

ANSWER ALL 1. A quantity of coal used in a boiler had the following analysis: 82% C; 5% H; 6% 0; 2% N; 5% ash. The dry flue gas analysis showed 14% CO2 and some oxygen. Calculate: (i) The oxygen content of the dry flue gas; (ii) The A/F ratio and the excess air supplied. ANSWER (5.52%; 14.29/1; 31.8%) 2. The enthalpy of combustion of propane gas, C3H8, at 25 ?C with the H2O in the products in the liquid...

Question 1: The boiler in the heating plant at arctic College is designed to burn either...

Question 1: The boiler in the heating plant at arctic College is designed to burn either fuel oil or coal. Suppose that one ton of coal, C, produces as many BTUs as 100 gallons of fuel oil, F. (a) Draw a typical isoquant for BTU production. (b) What is the elasticity of substitution between fuel oil and coal? (c) Suppose that fuel oil is $1.00 per gallon and coal is $80 per ton. Draw the output expansion path on the...

Subjects