W 24 * 55 of 50ksi. what is the 1. Ag 2. rx and ry

W 24 * 55 of 50ksi. what is the

1. Ag

2. rx and ry

Expert Solution

Ag = Gross cross sectional are

rx and ry = Radius of gyration about x-axis and y-axis

since, the given section is standard section, it already has that standard values.

Ag = 16.2 in2

rx = 9.11 in ry = 1.34 in

Ally Wells answered 1 year ago

An HSS 16x16x1/2 (A = 28.3 in2, twall = 0.465 in, rx = ry = 6.31...

An HSS 16x16x1/2 (A = 28.3 in2, twall = 0.465 in, rx = ry = 6.31 in) with Fy =46 ksi is used for an 18 ft long column with simple end supports (K = 1.0) a) calculate b/t and classify this element (nonslender element or slender element) b) calculate KL/r c) calculate Fcr d) determine Φc Pn and Pn/Ωc with the AISC equation.

1) Elipse. Calculate 5 pixels, if Rx= 4, Ry= 7, Xc= 0, Yc= 0 2) Circle...

1) Elipse. Calculate 5 pixels, if Rx= 4, Ry= 7, Xc= 0, Yc= 0 2) Circle line. Calculate 6 pixels, if R= 14, Xc= 1, Yc= -9 I just need matematical solunations

Rx: Pilocarpine nitrate 2% (w/v) Boric acid q.s. Rx Sterile water for injection q.s 20 mL...

Rx: Pilocarpine nitrate 2% (w/v) Boric acid q.s. Rx Sterile water for injection q.s 20 mL Sig: One (1) gtt OU t.i.d.. How much boric acid (in milligrams) is needed to make this prescription isotonic? (E-value pilocarpine nitrate = 0.23, E-value boric acid = 0.52). Round your answer to the nearest whole number.

Also, find the Ix, Iy, rx, ry, and J for an 8 inch tall, 6 inch...

Also, find the Ix, Iy, rx, ry, and J for an 8 inch tall, 6 inch wide rectangle with a 1 inch diameter hole drilled in it. The center of the hole is located 3 inches below and 2 inches to the right of the top left corner of the rectangle.

propagate errors for magnitude and theta. magnitude(aka R) = sqrt(Rx2+Ry2) tetha = arctan(Ry/Rx) unclear on how...

propagate errors for magnitude and theta. magnitude(aka R) = sqrt(Rx2+Ry2) tetha = arctan(Ry/Rx) unclear on how to get the equation delta R and delta theta.

Calculate the Kf of Ag(NH3)2 + from Ag+(aq) + e- ⇋ Ag(s) E0= 0.81 V Ag(NH3)2+(aq)...

Calculate the Kf of Ag(NH3)2 + from Ag+(aq) + e- ⇋ Ag(s) E0= 0.81 V Ag(NH3)2+(aq) + e- ⇋ Ag(s) + 2NH3(aq) E0= 0.37 V

Find all second order derivatives for r(x,y)=(xy)/2x+5y. (I need most detail at the rx/ry to rxx/ryy...

Find all second order derivatives for r(x,y)=(xy)/2x+5y. (I need most detail at the rx/ry to rxx/ryy part, I can't get the top correct)

Given: AgBr(s) <--> Ag+(aq) + Br -(aq) and Ag+(aq) + 2NH3(aq) <--> Ag(NH3)2+(aq) a) What would...

Given: AgBr(s) <--> Ag+(aq) + Br -(aq) and Ag+(aq) + 2NH3(aq) <--> Ag(NH3)2+(aq) a) What would be the value of K for AgBr(s) + 2NH3(aq) <--> Ag(NH3)2+(aq) + Br -(aq) ? b) What would be the molar solubility of silver bromide in 2.00 M aqueous ammonia?

Rx: Castor oil 10% (v/v) Tween 80 and Span 20 2% (w/v) Simple syrup qs 50...

Rx: Castor oil 10% (v/v) Tween 80 and Span 20 2% (w/v) Simple syrup qs 50 mL How many gram(s) of Span 20 are needed to prepare for the prescription, given that the required HLB for the emulsion is 10, Span 20 has an HLB of 8.6, and Tween 80 has an HLB of 15?

2 Ag+ + Cu --> Cu+2 + 2 Ag You individually weigh out a piece of...

2 Ag+ + Cu --> Cu+2 + 2 Ag You individually weigh out a piece of Copper Wire and an empty Reaction Tube. You add a measured volume of silver nitrate solution of known concentration to the Reaction Tube and drop in the copper wire. Weight of copper wire 1.3771 g Weight of empty Reaction Tube 6.4591 g Volume of AgNO3 solution used 3.65 mL Molarity of original AgNO3 solution 0.1536 M While the silver is being reduced, you make...

Question