Question

In: Civil Engineering

Determine the number of lanes required according to Highway Capacity Manual 2010 methodology to achieve a...

Determine the number of lanes required according to Highway Capacity Manual 2010 methodology to achieve a target Level of Service (LOS) of C for a section of a freeway. The section characteristics are the following: rolling terrain, 15% trucks, 2% RVs, PHF = 0.90, AADT = 30,000 veh/day, 50% traffic in the design direction, 12 ft wide lanes, 5 ft right shoulder clearance, 4 ramps in 6 miles. Use 30th highest hourly volume for design hour volume assuming that the value will be exceeded in 15% of similar locations.

Solutions

Expert Solution



Related Solutions

A multilane highway has two northbound lanes. Each lane has a capacity of 1500 vehicles per...
A multilane highway has two northbound lanes. Each lane has a capacity of 1500 vehicles per hour. Currently, northbound traffic is consists of 3100 vehicles with 1 occupant, 600 vehicles with 2 occupants, 400 vehicle with 3 occupants, and 20 buses with 50 occupants each. The highway’s performance function is t = t0 ( 1 + 1.15 (x/c)6.87 ) where t is in minutes, t0 is equal to 15 minutes, and x and c are volumes and capacities in vehicle...
What are number of lanes required to meet the criterion of LOS B for a new...
What are number of lanes required to meet the criterion of LOS B for a new 3.5 km segment of undivided multilane highway, if design hour volume is 70000 v/h, 85 km/h speed limit, peak hour volume is 20% of daily traffic, the terrain is level, PHF= 0.8, and 2.2 m lateral , 15 access points in the segment, SRV 5% trucks, 3%clearance from the right edge.
According to the 2010 US Census, the average number of residents per housing unit for the...
According to the 2010 US Census, the average number of residents per housing unit for the n=87 counties in Minnesota was 2.10, and the standard deviation was 0.38. Test whether the true mean number of residents per housing unit in Minnesota in 2010 is less than the national value of 2.34 at the level α = 0 . 05. a. Show all five steps of this test. b. What type of error could we be making in this context? c....
According to the U.S. Federal Highway Administration, the mean number of miles driven annually is 12,200...
According to the U.S. Federal Highway Administration, the mean number of miles driven annually is 12,200 with a standard deviation of 3800 miles. A resident of the state of Montana believes the drivers in Montana drive more than the national average. She obtains a random sample of 35 drivers from a list of registered drivers in the state and finds the mean number of miles driven annually for these drivers to be 12,895.90. Is there sufficient evidence to show that...
According to the U.S. Federal Highway Administration, the mean number of miles driven annually is 12,200...
According to the U.S. Federal Highway Administration, the mean number of miles driven annually is 12,200 with a standard deviation of 3800 miles. A resident of the state of Montana believes the drivers in Montana drive more than the national average. She obtains a random sample of 35 drivers from a list of registered drivers in the state and finds the mean number of miles driven annually for these drivers to be 12,895.90. Is there sufficient evidence to show that...
Determine the size of the solar array and the number of batteries required to power a...
Determine the size of the solar array and the number of batteries required to power a pump that will pump water from a 150 ft deep well to a storage tank that is 60-ft above the ground surface. Use the Internet to identify 1) the pump model 2) the solar array kit size and 3) the battery type.
Determine an approximate sample size required to construct a 90%confidence interval for the mean number...
Determine an approximate sample size required to construct a 90% confidence interval for the mean number of miles on four-year -old Honda Civics, with a margin of error of 1000 miles. Assume that a preliminary study showed that the standard deviation is estimated to be 19,700 miles. A random sample of 32 washing machines had a mean replacement time of 10.6 years and a population standard deviation of 2.1 years. Find the margin of error that corresponds to 99% confidence...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT