Question

In: Mechanical Engineering

Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60...

Air enters the compressor of an air-standard Brayton cycle with a volumetric flow rate of 60 m3/s at 0.8 bar, 280 K. The compressor pressure ratio is 17.5, and the maximum cycle temperature is 1950 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%.


Determine:

(a) the net power developed, in kW.

(b) the rate of heat addition in the combustor, in kW.

(c) the percent thermal efficiency of the cycle.

Need some help with those questions. Thank you so much

Solutions

Expert Solution


Related Solutions

Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of 100 m3/s at 0.8 bar, 280 K. The compressor pressure ratio is 20, and the maximum cycle temperature is 1800 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. For a regenerator effectiveness of 86%, determine: (a) the net power developed, in MW. (b) the rate of heat addition in the combustor, in MW. (c)...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of 60 m3/s at 0.8 bar, 280 K. The compressor pressure ratio is 20, and the maximum cycle temperature is 1950 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. For a regenerator effectiveness of 86%, determine: (a) the net power developed, in MW. (b) the rate of heat addition in the combustor, in MW. (c)...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of...
Air enters the compressor of a regenerative air-standard Brayton cycle with a volumetric flow rate of 20 m3/s at 0.8 bar, 280 K. The compressor pressure ratio is 20, and the maximum cycle temperature is 1950 K. For the compressor, the isentropic efficiency is 92% and for the turbine the isentropic efficiency is 95%. For a regenerator effectiveness of 86%, determine: (a) the net power developed, in MW. (b) the rate of heat addition in the combustor, in MW. (c)...
Air enters the compressor of an ideal air standard Brayton cycle at 100 kPa and 290...
Air enters the compressor of an ideal air standard Brayton cycle at 100 kPa and 290 K with a mass flow rate (m⋅) of 6 kg/s. The compressor pressure ratio is 10. The turbine inlet temperature is 1500 K. If a regenerator with an effectiveness of 70% is incorporated in the cycle, determine (a) the thermal efficiency (ηth,Brayton) of the cycle. Use the PG model for air. (b) What-if Scenario: What would the thermal efficiency be if the regenerator effectiveness...
1) In an air-standard Brayton cycle, the air enters the compressor at 0.1 MPa and 15?C....
1) In an air-standard Brayton cycle, the air enters the compressor at 0.1 MPa and 15?C. The pressure leaving the compressor is 1.0 MPa, and the maximum temperature in the cycle is 1100?C. Determine The pressure and temperature at each point in the cycle. The compressor work, turbine work, and cycle efficiency. For each control volume analysed, the model is ideal gas with constant specific heat at 300 K, and each process is steady state with no kinetic or potential...
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with...
Air enters the compressor of an ideal air-standard Brayton cycle at 100 kPa, 300 K, with a volumetric flow rate of 5 m3/s. The turbine inlet temperature is 1800 K. For a compressor pressure ratio of 9, determine: (a) the percent thermal efficiency of the cycle. (b) the back work ratio. (c) the net power developed, in kW.
Air enters the compressor of an ideal cold air-standard Brayton cycle at 100 kPa, 300 K,...
Air enters the compressor of an ideal cold air-standard Brayton cycle at 100 kPa, 300 K, with a mass flow rate of 6 kg/s. The compressor pressure ratio is 10, and the turbine inlet temperature is 1400 K. For k = 1.4 and Cp = 1.005 kJ/kg, calculate: (a) the percent thermal efficiency of the cycle. (b) the back work ratio. (c) the net power developed, in kW
Air enters the compressor of an ideal Brayton refrigeration cycle at 140 kPa, 270K and is...
Air enters the compressor of an ideal Brayton refrigeration cycle at 140 kPa, 270K and is compressed to 420 kPa. At the turbine inlet, the temperature is 320K and the volumetric flow rate is 0.4 m3/s. Determine (i) the mass flow rate, in kg/s; (ii) the net power input, in kW; (iii) the refrigerating capacity, in kW; and (iv) the coefficient of performance.
. Air enters the compressor of a gas turbine power plant operating on Brayton cycle at...
. Air enters the compressor of a gas turbine power plant operating on Brayton cycle at 14.5 psia and 540° R. The pressure ratio across the turbine and compressor is same, which is equal to 6. Assume that the compressor work as 0.4 times the turbine work. Take K=1.4 a) Draw the T-S diagram of the cycle. [2] b) Calculate the maximum temperature in the cycle. [3] c) Calculate the cycle efficiency
An air compressor is operating at a steady state. The air enters at with a volumetric...
An air compressor is operating at a steady state. The air enters at with a volumetric flow rate 1.2 m^3/s at 170 kPa and 22 degrees celsius with negligible velocity and leaves at 1500 kPa with velocity of 200 m/s. The power to the compressor is 60 kW and the compressor is cooled at a rate of 15 kJ/kg. Determine the exit area.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT