Question

In: Physics

Can the Hubble Space Telescope (2.4 m diameter) or the largest optical telescope on Earth (the...

Can the Hubble Space Telescope (2.4 m diameter) or the largest optical telescope on Earth
(the Keck Telescope in Hawaii with 10 m diameter) observe manmade items left on the moon
(e.g. the flag ~ 1.25 m long and lunar rover ~ 3 m long)? Show your work. If not, calculate the
smallest size each telescope can resolve on the Moon and the minimum telescope aperture
size required to resolve these objects.

Solutions

Expert Solution


Related Solutions

The primary optical element of the Hubble Space Telescope (HST) is 3.2 m in diameter and...
The primary optical element of the Hubble Space Telescope (HST) is 3.2 m in diameter and has a focal length of 62 m. (Treat it as a simple, single lens for this homework) The telescope is aimed at Jupiter and the collected light is focused onto a sensitive Charge Coupled Device (CCD) detector, similar to what is in a digital camera. Each pixel in the detector is a 21 μm x 21 μm square, and the full CCD is 4096...
The Hubble Space Telescope (HST) is an Earth-orbiting telescope whose primary mirror has a diameter of...
The Hubble Space Telescope (HST) is an Earth-orbiting telescope whose primary mirror has a diameter of 2.4 metres. a) What is the best possible angular resolution (in arc-seconds) that the HST can achieve when observing visible light (wavelengths between 400 nm and 700 nm)? Which colour of visible light can be best resolved? b) Jupiter’s four largest moons (the Galilean Moons) are about the same size as Earth’s Moon and are as close as about 628 million kilometres (6.28 ×...
The Hubble Space Telescope orbits the Earth every 95 minutes, taking breathtaking images of our universe....
The Hubble Space Telescope orbits the Earth every 95 minutes, taking breathtaking images of our universe. Calculate its altitude above the Earth’s Surface.
(a) Keck-I has a 10m diameter mirror. HST (Hubble Space Telescope) has a 2.4m mirror. What...
(a) Keck-I has a 10m diameter mirror. HST (Hubble Space Telescope) has a 2.4m mirror. What is the ratio of the light gathering power of Keck-I to the light-gathering power of HST? [Compute the ratio (light gathering power of Keck)/(light gathering power of HST) and express as a decimal. Do not use scientific notation.] (b) What is the ratio of the angular resolution limit of Keck to the angular resolution limit of HST? (Assume they are both observing at the...
(a) The Hubble Space Telescope is in a nearly circular orbit, approximately 610 km (380 mi)...
(a) The Hubble Space Telescope is in a nearly circular orbit, approximately 610 km (380 mi) above the surface of the Earth. Estimate its orbital period from the generalized version of Kepler’s third law. (b) Communications and weather satellites are often placed in geosynchronous orbits. A geosynchronous orbit is an orbit about the Earth with orbital period P exactly equal to one sidereal day. A special kind of geosynchronous orbit is when the satellite has an inclination of 0˝ from...
Thirty-six piles, 0.6 m in diameter, are spread at 2.4 m centres in a 6 x...
Thirty-six piles, 0.6 m in diameter, are spread at 2.4 m centres in a 6 x 6 group. The piles extend between depths of 3 m and 18 m in a layer of stiff clay 28 m thick, overlying rock. The undrained shear strength of the clay at a depth of 18 m is 145 KN/m2 and the average value over the pile length is 105 KN/m2. The following parameters have also been determined for the clay: α = 0.4,...
The moon's diameter is 3.48 × 106 m, and its mean distance from the earth is...
The moon's diameter is 3.48 × 106 m, and its mean distance from the earth is 3.85 × 108 m. The moon is being photographed by a camera whose lens has a focal length of 70.0 mm. (a) Find the diameter of the moon's image on the slide film. (b) When the slide is projected onto a screen that is 17.1 m from the lens of the projector (f = 170.0 mm), what is the diameter of the moon's image...
A 6.10 m length of 2.4 mm -diameter wire carries a 770 mA current when 22.0...
A 6.10 m length of 2.4 mm -diameter wire carries a 770 mA current when 22.0 mV is applied to its ends. The drift velocity is 2.0×10−5 m/s . A. Determine the resistance R of the wire. Express your answer to three significant figures and include the appropriate units. B. Determine the resistivity ρ. Express your answer to two significant figures and include the appropriate units. C.Determine the current density j. Express your answer to two significant figures and include...
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at...
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at its normal boiling point of -452.074 degrees Fahrenheit. At this temperature Helium's heat of vaporization is 20.4 kJ/kg. The walls of the helium container are 1.2 cm thick and have a thermal conductivity of 13.889 W/(m K). The helium container is surrounded by liquid nitrogen at a temperature of -327.64 degrees Fahrenheit. A. What is the conductive surface area of the metal cylinder? B....
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at...
A cylindrical metal can, 0.1 m high and 0.05 m in diameter, contains liquid helium at its normal boiling point of -452.074 degrees Fahrenheit. At this temperature Helium's heat of vaporization is 20.4 kJ/kg. The walls of the helium container are 1.2 cm thick and have a thermal conductivity of 13.889 W/(m K). The helium container is surrounded by liquid nitrogen at a temperature of -327.64 degrees Fahrenheit. A. What is the conductive surface area of the metal cylinder? B....
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT