if the input signal is x(t)=exp[-at]u(t) and system impulse response is h(t)=u(t+2) what is the outpul...

if the input signal is x(t)=exp[-at]u(t) and system impulse response is h(t)=u(t+2) what is the outpul signal y(t) ?

Expert Solution

Here he gave signals in time domain ,so to get the output is the convolution of the two signals.ie y(t)=x(t)*y(t). But the convolution in time domain is same as multiplication in frequency domin. So for a simplicity we convert the given signals into laplace domin after the we will solve this problem.

Thank you.

Manojponduru answered 2 years ago

consider a system with the impulse response h(t) = e −t [u(t) − u(t − 2)]....

consider a system with the impulse response h(t) = e −t [u(t) − u(t − 2)]. (It's exponential function) Let the input signal x(t) be x(t) = 1 if 0 ≤ t < 1, x(t) = −1 if 1 ≤ t < 2, x(t) = 0 otherwise. (a) Determine the system output y(t). (b) (20) Plot y(t) using a computer and specify the maximum and minimum.

x[n] is the input of an LTI system with the impulse response of h[n]. x[n] =...

x[n] is the input of an LTI system with the impulse response of h[n]. x[n] = [1, 2, 3] and h[n] = [4, 6]. Use 4-point DFT and IDFT and zero padding of x[n] and h[n] to find the output y[n].

Please solve on MATLAB: Consider the signal x(t) = 2−tu(t), where u(t) is the unit step...

***Please solve on MATLAB:*** Consider the signal x(t) = 2−tu(t), where u(t) is the unit step function. a) Plot x(t) over (−1 ≤ t ≤ 1). b) Plot 0.5x(1 − 2t) over (−1 ≤ t ≤ 1).

Given Fxy(x,y)=u(x)u(y)[1-Exp(-x/2)-Exp(-y/2)+Exp(-(x+y)/2)]. Note: The step functions mean that Fxy(x,y)=0 for either or both x<0 and y<0....

Given Fxy(x,y)=u(x)u(y)[1-Exp(-x/2)-Exp(-y/2)+Exp(-(x+y)/2)]. Note: The step functions mean that Fxy(x,y)=0 for either or both x<0 and y<0. Any x or y argument range below zero must be truncated at zero. Determine: a) P{X<=1,Y<=2} Ans: 0.2487 b) P{0.5<X<1.5} Ans: 0.3064 c) P{-1.5<X<=2, 1<Y<=3} Ans: 0.2423

2. A digital signal processing system with analog audio signal input in the range of 0-20...

2. A digital signal processing system with analog audio signal input in the range of 0-20 Khz uses oversampling techniques and a second order sigma delta modulator to convert the analog signal into a digital bit stream at a rate of 3.072 Mhz. i) Explain how the digital bit stream may be converted in to a digital multibit stream for x(n). ii) Determine the overall improvement in signal to quantization noise ratio made possible by oversampling and noise shaping and...

(PDE) Find the series soln to Ut=Uxx on -2<x<2, T>0 with Dirichlet boundary { U(t,-2)=0=U(t, 2)...

(PDE) Find the series soln to Ut=Uxx on -2<x<2, T>0 with Dirichlet boundary { U(t,-2)=0=U(t, 2) initial condition { U(0,x) = { x, IxI <1

Order the following steps of a cell signaling system. signal transduction signal deactivation signal response signal...

Order the following steps of a cell signaling system. signal transduction signal deactivation signal response signal reception

A particular wave pulse is described by the function f(x,t) = (2/??) exp[-(x + ct)²]. Explain...

A particular wave pulse is described by the function f(x,t) = (2/??) exp[-(x + ct)²]. Explain how to determine the velocity of the pulse and why that works. In particular, explain why the sign of c determines the direction of propagation. (In case you aren’t familiar, “expo” means “exponential” and exp(x) is often used instead of e? when the argument gets too big to fit comfortably as an exponent. Not that this question requires knowing any of this.)

. Given the following non-periodic signal: x(t) = 3 e-5t cos(12t) u(t) Find the Fourier...

. Given the following non-periodic signal: x(t) = 3 e-5t cos(12t) u(t) Find the Fourier transform expression X(ω) without using Table. Calculate the magnitude spectrum of X(ω) for ω = π/8, π/4, and π/2

Let X ~ exp(λ) MGF of X = λ/(1-t) a) What is MGF of Y =...

Let X ~ exp(λ) MGF of X = λ/(1-t) a) What is MGF of Y = 3X b) Y has a common distribution, what is the pdf of Y? c) Let X1,X2,....Xk be independent and identically distributed with Xi ~ exp(λ) and S = Σ Xi (with i = 1 below the summation symbol, and k is on top of the summation symbol). What is the MGF of S? d) S has a common distribution. What is the pdf of...

Question