Two students use a uniform slab of wood (mass= 10 Kg, length = 2.0m) in order...

Two students use a uniform slab of wood (mass= 10 Kg, length = 2.0m) in order to move a delicate but heavy piece of lab equipment (mass = 55 kg). The piece of equipment is placed 0.35 m from one of the students (note: one of the students is stronger than the other, but they succeed in keeping the slab perfectly level).

Find the force that the student nearest to the load applies to the slab:

Expert Solution

genius_generous answered 2 years ago

A uniform rod of length 2.00 m and mass 5.00 kg is suspended by two ropes...

A uniform rod of length 2.00 m and mass 5.00 kg is suspended by two ropes of negligible mass. The rope at the lower end is horizontal. The rope at the upper end makes an angle φ = 30.0◦ with the vertical. φ θ (a) Draw a free body diagram for the rod. (b) What is the tension in the upper rope? (c) What is the tension in the lower (horizontal) rope? (d) What is the angle θ the rod...

A uniform steel rod has mass 0.300 kg and length 40.0 cmand is horizontal. A uniform...

A uniform steel rod has mass 0.300 kg and length 40.0 cmand is horizontal. A uniform sphere with radius 8.00 cm and mass 0.700 kg is welded to one end of the bar, and a uniform sphere with radius 6.00 cm and mass 0.580 kg is welded to the other end of the bar. The centers of the rod and of each sphere all lie along a horizontal line. Part A How far is the center of gravity of the...

A uniform beam of mass MB = 0.8833 kg and length l = 0.8m is attached...

A uniform beam of mass MB = 0.8833 kg and length l = 0.8m is attached to a wall by a hinge at at one end and by a cord of negligible mass and length ls = 1.27 m that makes an angle ? with the horizontal at the other end (see figure drawn on the board), such that the beam is horizontal. A mass mH = 0.55 kg is hung from the beam at a distance lH = 0.6...

A uniform rod of mass 2.20 kg and length 2.00 m is capable ofrotating about...

A uniform rod of mass 2.20 kg and length 2.00 m is capable of rotating about an axis passing through its center and perpendicular to its length. A mass m1 = 4.90 kg is attached to one end and a second mass m2 = 2.60 kg is attached to the other end of the rod. Treat the two masses as point particles. At the origina of an xy-coordinate plane a rod of length labeled l rotates around it's midpoint. Attached to...

The uniform pole of length 5 m and mass M = 94.2 kg is placed against...

The uniform pole of length 5 m and mass M = 94.2 kg is placed against the supporting surfaces shown. If the coefficient of static friction at both A and B is 0.25. Determine the maximum angle theta (in degrees) at which the pole can be placed before it begins to slip.

A uniform thin rod of length 0.4 m and mass 0.5 kg can rotate in a...

A uniform thin rod of length 0.4 m and mass 0.5 kg can rotate in a horizontal plane about a vertical axis on the left end of the rod. The rod is at rest when a 10.0-g bullet traveling in the horizontal plane of the rod is fired into the right end of the rod at an angle 90o with the rod. The bullet lodges in the rod and the angular velocity of the rod is 10 rad/s immediately after...

A uniform stationary ladder of length L = 4.2 m and mass M = 19 kg...

A uniform stationary ladder of length L = 4.2 m and mass M = 19 kg leans against a smooth vertical wall, while its bottom legs rest on a rough horizontal floor. The coefficient of static friction between floor and ladder is μ = 0.38. The ladder makes an angle θ = 53° with respect to the floor. A painter of mass 8M stands on the ladder a distance d from its base. a. Find the magnitude of the normal...

Two uniform solid spheres, each with mass 0.800 kg and radius 8.00×10−2 m, are connected by...

Two uniform solid spheres, each with mass 0.800 kg and radius 8.00×10−2 m, are connected by a short, light rod that is along a diameter of each sphere and are at rest on a horizontal tabletop. A spring with force constant 157 N/m has one end attached to the wall and the other end attached to a frictionless ring that passes over the rod at the center of mass of the spheres, which is midway between the centers of the...

Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally...

Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally to a wall that can only support a vertical load ( The horizontal component of the force of the wall on the beam is identically zero). There is a chandelier (mass = 40 kg) hanging at a distance = 4.21 meter from the end of the beam that is attached to the wall. There is a vertical cable hanging down from the ceiling that...

A block of wood has a mass of 3.54 kg and a density of 588 kg/m3....

A block of wood has a mass of 3.54 kg and a density of 588 kg/m3. It is to be loaded with lead (1.13 × 104 kg/m3) so that it will float in water with 0.887 of its volume submerged. What mass of lead is needed if the lead is attached to (a) the top of the wood and (b) the bottom of the wood?

Question