A 10.0 pF (picofarad - pico = 10^-12) is connected to a 12.0 V power supply....

A 10.0 pF (picofarad - pico = 10^-12) is connected to a 12.0 V power supply. What is the energy stored in this capacitor?

Solutions

Expert Solution

Capacitance,

Voltage of the power supply,

So, energy stored in the capacitor

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A 7.5–nF capacitor is charged up to 12.0 V, then disconnected from the power supply and...

A 7.5–nF capacitor is charged up to 12.0 V, then disconnected from the power supply and connected in series through a coil. The period of oscillations of the circuit is then measured to be 8.60 X 10^-5 s. (a) Find the inductance of the coil; (b) the maximum charge on the capacitor; (c) the total energy of the circuit; (d) the maximum current in the circuit.

A 10.0 v battery, a 5.00 ohm resistor, and a 10.0 H inductor are connected in...

A 10.0 v battery, a 5.00 ohm resistor, and a 10.0 H inductor are connected in series. After the current in the circuit has reached its maximum value, calculate (a) the power being supplied by the battery, (b) the power being delivered to the resistor, (c)the power being delivered to the inductor, and (d) the energy stored in the magnetic field of the inductor.

An LC circuit is built with a 10 mH inductor and an 12.0 pF capacitor. The...

An LC circuit is built with a 10 mH inductor and an 12.0 pF capacitor. The capacitor voltage has its maximum value of 40 V at t=0s. Part A How long is it until the capacitor is first fully discharged? Express your answer with the appropriate units. (t=?) Part B What is the inductor current at that time? Express your answer with the appropriate units.(I=?)

A 3500-pF air-gap capacitor is connected to a 25-V battery. If a piece of mica is...

A 3500-pF air-gap capacitor is connected to a 25-V battery. If a piece of mica is placed between the plates, how much charge will flow from the battery?

An AC power supply produces a maximum voltage ΔVmax = 88 V. This power supply is...

An AC power supply produces a maximum voltage ΔVmax = 88 V. This power supply is connected to a resistor R = 27.0 Ω, and the current and resistor voltage are measured with an ideal AC ammeter and voltmeter as shown in the figure below. An ideal ammeter has zero resistance, and an ideal voltmeter has infinite resistance. (a) What is the reading on the ammeter? A (b) What is the reading on the voltmeter? V

A capacitor with capacitance 6.00 × 10−5 is charged by connecting it to a 12.0 V...

A capacitor with capacitance 6.00 × 10−5 is charged by connecting it to a 12.0 V battery. The capacitor is disconnected from the battery and connected across an inductor with L=1.50 H. What is the initial energy stored in the capacitor? What are the angular frequency of the electrical oscillations and the period of the oscillations? What is the charge on the capacitor 0.0230 s after the capacitor is connected to the inductor? Interpret the sign of your answer. What...

A 1.0 toaster and a 2.0 lamp are connected in parallel with the 110-V supply of...

A 1.0 toaster and a 2.0 lamp are connected in parallel with the 110-V supply of your house. (Ignore the fact that the voltage is AC rather than DC.) (a) Draw a schematic of the circuit. (b) For each of the three components in the circuit, find the current passing through it and the voltage drop across it. (c) Suppose they were instead hooked up in series. Draw a schematic and calculate the same things.

A 22.0 μF capacitor is charged by a 160.0-V power supply, then disconnected from the power...

A 22.0 μF capacitor is charged by a 160.0-V power supply, then disconnected from the power and connected in series with a 0.240-mH inductor. Calculate the energy stored in the inductor at t = 1.45 ms .

480 V, 200 kVA, 08 PF lagging, 60 Hz two pole Y connected synchronous generator has...

480 V, 200 kVA, 08 PF lagging, 60 Hz two pole Y connected synchronous generator has a synchronous reactance of 0.25 Ω and an armature resistance of 0.03 Ω. At 60 Hz, its friction and windage losses are 6 kW, and its core losses are 4 kW. The field circuit has a dc voltage of 200 V, and the maximum IF is 10 A. The resistance of the field circuit is adjustable over the range from 20 to 200 Ω....

(a) Once an ideal inductor is connected to a 220 V, 50 Hz a.c supply and...

(a) Once an ideal inductor is connected to a 220 V, 50 Hz a.c supply and later the same inductor is connected to 220 V, 100 Hz a.c supply. What happens to the current flowing through it in both the cases? Will the current be the same or different? Give brief reason (2marks) (b) A current of 12A flows in a when connected to a 240V , 50Hz AC mains and 2A from a 12V DC mains. Find the values...

Subjects