Question
In: Math
A pilot flew a jet from City A to City B, a distance of 1600 mi....
A pilot flew a jet from City A to City B, a distance of 1600 mi. On the return trip, the average speed was 20% faster than the outbound speed. The round-trip took 5 h 20 min. What was the speed from City A to City B?
A wire 370 in. long is cut into two pieces. One piece is formed into a square and the other into a circle. If the two figures have the same area, what are the lengths of the two pieces of wire (to the nearest tenth of an inch)?
Solutions
please like
milcah answered 2 years agoRelated Solutions
A pilot flew a jet from City A to City B, a distance of 1600 mi....
A pilot flew a jet from City A to City B, a distance of 1600 mi.
On the return trip, the average speed was 20% faster than the
outbound speed. The round-trip took 5 h 20 min. What was the speed
from City A to City B?
It took a crew 3 h 44 min to row 7 km upstream and back again.
If the rate of flow of the stream was 1 km/h, what was the rowing
speed of...
1. Greg flew from Kansas City to Boston on Thursday to attend business on Friday. He could...
1. Greg
flew from Kansas City to Boston on Thursday to attend business on
Friday. He could have flown home Friday evening with no additional
airfare. He stayed over Saturday through Monday to attend a
sporting event and visit the historic sights. Greg paid airfare of
$300, meals of $26 per day (after reduction to 50 percent) and
lodging of $59 per day. Greg may deduct how much?
2. Shaoq is a very successful
self-employed hair stylist who incurred the following...
Professor drives a Tesla to travel from city ? to city ?. The distance between cities...
Professor drives a Tesla to travel from city ? to city ?. The
distance between cities ? and ? is ? miles. The Tesla can go up to
? miles before it needs a charge and there are many charging
locations along the way including those in city ? and city ?.
Professor wants to minimize the number of charges needed so he can
get to his destination ASAP. Assume that at any charging location
there is at least another...
On October 3, 1967, test pilot William “Pete” Knight flew the X-15 hypersonic research vehicle to...
On October 3, 1967, test pilot William “Pete” Knight flew the
X-15 hypersonic research vehicle to a world’s speed record for an
airplane; he achieved Mach 6.7 at an altitude of 102,100 ft. (a)
What was the maximum velocity in ft/s? (b) What was the flow
temperature at the nose of the vehicle? Assume standard
altitude
What business is booming in Traverse City, Mi?
What business is booming in Traverse City, Mi?
An airplane pilot wishes to fly to his destination 500 mi due west, but the wind...
An airplane pilot wishes to fly to his destination 500 mi due
west, but the wind is blowing at 23.1 mi/hr toward 14.1° north of
west. The speed of the plane relative to the air is 166.5 mi/hr. At
what angle (south of west) must the pilot orient the plane in order
to fly to his destination directly?
If the pilot orients the plane at that angle, what will be the
speed of the plane relative to the ground?
Focal film distance is a. distance between object and central ray. b. the distance from the...
Focal film distance is
a. distance between object and central ray.
b. the distance from the x-ray tube to the object.
c. the distance from the x-ray tube to the image receptor.
d. the most reliable method for determining mAs and kVp.
(a) A commercial 737 jet transporting 143 passengers and 5 crew members from Kansas City to...
(a) A commercial 737 jet transporting 143 passengers and 5 crew
members from Kansas City to Baltimore burned 11,800 lbs. (about
1700 gallons) of Jet A fuel en route. Jet A fuel is kerosine based,
consisting primarily of CnH2n+2 hydrocarbons,
with n = 6 to 16, so the carbon: hydrogen ratio is close to 1:2.
During this flight, how much CO2 was released into the
atmosphere? Assume the combustion of the fuel was complete, so all
the fuel was burned...
A sample of 20 cars, including measurements of fuel consumption (city mi/gal and highway mi/gal), weight...
A sample of 20 cars, including measurements of fuel consumption
(city mi/gal and highway mi/gal), weight (pounds), number of
cylinders, engine displacement (in liters), amount of greenhouse
gases emitted (in tons/year), and amount of tailpipe emissions of
NOx (in lb/yr).
CAR
CITY
HWY
WEIGHT
CYLINDERS
DISPLACEMENT
MAN/AUTO
GHG
NOX
Chev. Camaro
19
30
3545
6
3.8
M
12
34.4
Chev. Cavalier
23
31
2795
4
2.2
A
10
25.1
Dodge Neon
23
32
2600
4
2
A
10
25.1
Ford...
A sample of 20 cars, including measurements of fuel consumption (city mi/gal and highway mi/gal), weight...
A sample of 20 cars, including measurements of fuel consumption
(city mi/gal and highway mi/gal), weight (pounds), number of
cylinders, engine displacement (in liters), amount of greenhouse
gases emitted (in tons/year), and amount of tailpipe emissions of
NOx (in lb/yr).
CAR
CITY
HWY
WEIGHT
CYLINDERS
DISPLACEMENT
MAN/AUTO
GHG
NOX
Chev. Camaro
19
30
3545
6
3.8
M
12
34.4
Chev. Cavalier
23
31
2795
4
2.2
A
10
25.1
Dodge Neon
23
32
2600
4
2
A
10
25.1
Ford...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Please do answer all four questions 11. A local college hospitality restaurant has the best meals...
- Acme, LLC produces three models of paint sprayers. A limitation of only 2,000 machine hours available...
- If you can run “traceroute/tracert” between machines in your organization. List three concrete applications to use...
- Discuss the differences among the terms cultural awareness, cultural sensitivity, cultural relevancy, cultural competence, and cultural...
- 1- Suppose you were tasked with developing the customer service qualities required for an external customer...
- History of Present Illness MDJ is a 50-year-old woman whose routine mammogram showed a 2.3 -...
- For a spherical thermal reactor with a water moderator in a homogeneous mixture, what is the...
ADVERTISEMENT