Question

In: Physics

The current in an inductor Select one: a. is in phase with the voltage b. lags...

The current in an inductor

Select one:

a. is in phase with the voltage

b. lags behind the voltage by 90 degrees

c. leads the voltage by 90 degrees

The current in an resistor

Select one:

a. leads the voltage by 90 degrees

b. lags behind the voltage by 90 degrees

c. is in phase with the voltage

What is an AC circuit?

Select one:

a. A circuit in which the applied voltage is constant as a function of time

b. A circuit in an Air Conditioning unit

c. A circuit in which the applied voltage changes as a function of time

d. A circuit in which the current flows in a single direction

If a ray of light is incident on a plane mirror (flat) at an angle of 30⁰ from the surface normal, what is the angle from the normal for the reflected ray?

Select one:

a. 40⁰

b. 30⁰

c. 15⁰

d. 65⁰

If a ray of light makes a 30⁰ from the normal incident from air (n=1) into glass (n=1.5) what is the angle of the refracted ray from the normal?

Select one:

a. 19.5⁰

b. 30⁰

c. 48.6⁰

d. 76⁰

Solutions

Expert Solution

b. Lags behind the voltage by 90 degrees

******

c. Is in phase with the voltage

******

c. A circuit in which applied voltage changes as a function of time.

******

b. 30o

*******

a. 19.5o


Related Solutions

what is the phase difference in phase angle between induced voltage and current in a PMSM...
what is the phase difference in phase angle between induced voltage and current in a PMSM controlled to keep maximum torque per amp?
1)Why is there phase difference between voltage and current in an a.c. circuit ?. Explain the...
1)Why is there phase difference between voltage and current in an a.c. circuit ?. Explain the concept of power factor. 2). Discuss the disadvantages of a low power factor. 3. Explain the causes of low power factor of the supply system. 4. Discuss the various methods for power factor improvement 5)Write short notes on the following : (i) Power factor improvement by synchronous condenser (ii) Importance of p.f. improvement (iii) Economics of p.f. improvement
Q3/ Draw the out voltage and current waveforms of a single-phase cycloconverter connected to a purely...
Q3/ Draw the out voltage and current waveforms of a single-phase cycloconverter connected to a purely resistive load. The following information could be useful: Load Supply Voltage, Supply Frequency Output Frequency Firing Angle At 202 230Vrms, 50 Hz 12.5 1300 sec Your drawing should contain all the detaiks including Amplitudes, Time, Degrees and Axis Names,
Select the correct answer 1- The current i through an inductor cannot change abruptly. The rate...
Select the correct answer 1- The current i through an inductor cannot change abruptly. The rate of change di/dt also cannot change abruptly. Both quantities must always be continuous. (True/ FALSE) 2- When a steady current flows through an inductor, there is no energy flow in or out of the inductor. (True/ FALSE ). 3- Long after an emf has been connected to an RL circuit and the current has stabilized, the voltage across the inductor is (Zero / None...
Examples and describe voltage, current, and phase angle. Describe power and resonance in ac circuits. Examples...
Examples and describe voltage, current, and phase angle. Describe power and resonance in ac circuits. Examples in daily life and explain how transformers work. PLEASE DO NOT WRITE IT BY HAND
The voltage across an inductor is 65 V and has a frequency of 430 Hz. If...
The voltage across an inductor is 65 V and has a frequency of 430 Hz. If the current in the inductor is 0.27 A, what is the value of its inductance?
a circuit that has a resistor, capacitor, and inductor in series with a 5V AC voltage...
a circuit that has a resistor, capacitor, and inductor in series with a 5V AC voltage source R = 5 Ω; L = 1 mH; C = 447 a) Find ω0 and f0 b) Complete the table f = f0 f = 0.5f0 f = 1.5f0 I VL Vc c) What is the phase between circuit current and applied voltage at f = f0 (in radians) d) Determine if the below statements are true or false Below resonance (f <...
A voltage source, Vs = 180sin760t is in series with an inductor L = 435 mH,...
A voltage source, Vs = 180sin760t is in series with an inductor L = 435 mH, a capacitor C = 2 μF, and a resistor R = 240 Ω. c) What is the phase angle of this circuit? Does the current lead the total voltage or lag behind it? d) What is the average power delivered by the battery and dissipated by each component? e) What is the instantaneous current in the circuit, I, Vs, VR, VL, VC at t...
10.An AC voltage source is connected in series to an inductor, a capacitor, and a resistor...
10.An AC voltage source is connected in series to an inductor, a capacitor, and a resistor of 8 Ohms. At the frequency when the phase angle is zero, capacitive reactance is 7 Ohms. What is the phase angle between the current and voltage at a frequency which is a factor of 3.2 times less than this frequency? answer in degresss and if negative 6. the resistance of a coil spun in a generator is 2 Ohms. the coil is in...
An inductor is connected to a 17 kHz oscillator that produces an rms voltage of 7.0...
An inductor is connected to a 17 kHz oscillator that produces an rms voltage of 7.0 V . The peak current is 70 mA .What is the value of the inductance L? answer in mH.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT