write a bill of materials for production of pencil with costing Description specification Slats 18.4 centimeters,...

write a bill of materials for production of pencil with costing

Description	specification
Slats	18.4 centimeters, 0.635 centimeter thick,6.98 centimeters wide
Lead (mixture of graphite and clay)	17 cm long, 1.5mm diameter
Eraser	0.75 cm long,6mm diameter
Metal band	2 cm long
Paint	0.5ml
Glue	0.5ml

Expert Solution

PRODUCT NAME	Pencil	CONTACT INFO
APPROVED BY	-------	------
DATE OF APPROVAL	-------	-------
PART COUNT	--------	------
TOTAL COST	--------	------

PART NUMBER	PART NAME	DESCRIPTION	QTY	UNITS	PART IMAGE	UNIT COST	AMOUNT
001	Salts	18.4 centimeters, 0.635 centimeter thick,6.98 centimeters wide	--	---	-------	-------	------
002	Lead (mixture of graphite and clay)	17 cm long, 1.5mm diameter	--	--	---------	---	----
003	Eraser	0.75 cm long,6mm diameter	---	---	------	-----	----
004	Metal band	2 cm long	---	---	-----	-----	-----
005	Paint	0.5ml	-----	----	--------	-----	------
006	Glue	0.5ml	----	---	------	-----	-----








		TOTAL PARTS				TOTAL

ekkarill92 answered 2 years ago

A bill of materials is used in manufacturing and production to show all of the parts...

A bill of materials is used in manufacturing and production to show all of the parts and materials required to manufacture a specific item or for the subassembly of a finished product, such as a motorcycle. The information in the bill of materials is useful for determining product costs, coordinating orders, and managing inventory. It can also show how product costs will be affected by price changes in components or raw materials. This project provides you with an opportunity to...

Bill uses a standard cost system for materials and labor in producing small fishing boats. Production...

Bill uses a standard cost system for materials and labor in producing small fishing boats. Production requires fiberglass, paint, and a purchased trim package as well as direct as follows: 2,000 pounds of fiberglass @ $1.80 per pound $3,600 6 quarts of gel coat paint @ $15 per quart 90 1 trim package 200 40 hours of labor @ $25 per hour 1,000 The standard cost for DM and DL $4,890 The following actual data related to the production of...

Give the raw materials,process description,advantages,disadvantages,flow sheet for production of PENICILLIN.

Give the raw materials,process description, flow sheet and engineering problems faced in the production of ACETIC...

Give the raw materials,process description, flow sheet and engineering problems faced in the production of ACETIC ACID

Give the raw materials,process description,advantages,disadvantages ,flow sheet for the production of CITRIC ACID

The speech production process Directions: Write a description of the process — step by step —...

The speech production process Directions: Write a description of the process — step by step — of producing voice and speech. Include ALL of the terms below. The function of each term （larynx, approximation, pharynx, pitch, phonation, sound waves, vocal folds, articulation, amplitude, volume, frequency, resonance, vibration）

Give the raw materials,process description, flow sheet, engineering problems faced in the production of CUPRAMMONIUM RAYONS

Give the raw materials, process description,advantages,disadvantages ,flow sheet for the production of OXALIC ACID (10 MARKS)

Give the raw materials, process description,advantages,disadvantages ,flow sheet for the production of OXALIC ACID

Part I. THE SPEECH PRODUCTION PROCESS Directions: Write a SHORT description of the process — step...

Part I. THE SPEECH PRODUCTION PROCESS Directions: Write a SHORT description of the process — step by step — of producing voice and speech. Include ALL of the terms below. larynx approximation pharynx pitch phonation sound waves vocal folds articulation amplitude volume frequency resonance vibration

Kool Inc. uses a weighted-average process costing system and has one production department. All materials are...

Kool Inc. uses a weighted-average process costing system and has one production department. All materials are introduced at the start of manufacturing; in contrast, conversion cost is incurred uniformly throughout production. The company had respective work in process inventories on 1 May and 31 May of 62,000 units and 70,000 units, the latter of which was 40 per cent complete. The production supervisor noted that Kool completed 100,000 units during the month. Costs in the 1 May work in process...

Question