A merry-go-round with a a radius of R = 1.98 m and moment of inertia I...

A merry-go-round with a a radius of R = 1.98 m and moment of inertia I = 193 kg-m² is spinning with an initial angular speed of ω = 1.45 rad/s in the counter clockwise direection when viewed from above. A person with mass m = 67 kg and velocity v = 4.9 m/s runs on a path tangent to the merry-go-round. Once at the merry-go-round the person jumps on and holds on to the rim of the merry-go-round.

1) What is the magnitude of the initial angular momentum of the merry-go-round?

2) What is the magnitude of the angular momentum of the person 2 meters before she jumps on the merry-go-round?

3) What is the magnitude of the angular momentum of the person just before she jumps on to the merry-go-round?

4) What is the angular speed of the merry-go-round after the person jumps on?

5) Once the merry-go-round travels at this new angular speed, with what force does the person need to hold on?

6) Once the person gets half way around, they decide to simply let go of the merry-go-round to exit the ride.

What is the magnitude of the linear velocity of the person right as they leave the merry-go-round?

7) What is the angular speed of the merry-go-round after the person lets go?

PLEASE ANSWER CORRECTLY WILL GIVE A THUMBS UP

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A playground merry-go-round of radius ? = 2.0 m has a moment of inertia ? =...

A playground merry-go-round of radius ? = 2.0 m has a moment of inertia ? = 250 kg ⋅ m^2 is rotating at 15 rpm about a frictionless, vertical axle. Facing the axle, a 25-kg child hops onto the merry-goround and manages to sit down on the edge. (a) (10 pts) What is the total angular momentum of the ‘merry-go-round-child’ system before and after the child hops on the the merry-go-round? (b) (10 pts) What is the new angular speed,...

A merry-go-round with a moment of inertia of 750 kgm^2 and a radius of 2.55 m...

A merry-go-round with a moment of inertia of 750 kgm^2 and a radius of 2.55 m is rotating with an angular velocity of 9.42 rad/s clockwise (as viewed from above.) A child, whose weight is 334 N, runs at 2.76 m/s tangent to the rim of the merry-go-round and jumps onto it in the direction opposite of its sense of rotation. With what angular speed does the merry-go-round rotate after the child jumps onto its edge? I'm pretty sure the...

1.) A playground merry-go-round with a radius of 1.75 m and a rotational inertia of 124.5...

1.) A playground merry-go-round with a radius of 1.75 m and a rotational inertia of 124.5 kgm2 is stationary. A robot with a mass of 32.5 kg gets on and walks around the edge of the merry-go-round. How many revolutions around the merry-go-round must the robot make in order for the merry-go-round to make two full revolutions? 2.) A student has an idea for a special record player that uses no electricity. The base is a circular turntable that floats...

2) A merry-go-round has a radius of 1.75 m and a rotational inertia of 600 km-m2....

2) A merry-go-round has a radius of 1.75 m and a rotational inertia of 600 km-m2. A child pushes the merry-go-round with a constant force of 102 N applied at the edge and parrallel to the edge. A frictional torque of 32 N.m acts at the axel of the merry-go-round. a) What is the torque applied by the child? b) What is the rotational acceleration of merry-go-round? c) The child stops pushing after 18 seconds, if merry-go-round had started from...

A merry-go-round modeled as a disk of mass M = 9.00 101 kg and radius R =...

A merry-go-round modeled as a disk of mass M = 9.00 101 kg and radius R = 2.20 m is rotating in a horizontal plane about a frictionless vertical axle (see figure). (a) After a student with mass m = 88.0 kg jumps onto the merry-go-round, the system's angular speed decreases to 2.10 rad/s. If the student walks slowly from the edge toward the center, find the angular speed of the system when she reaches a point 0.490 m from the...

A girl stands on the rim of a merry-go-round of radius 2.0 m that is not...

A girl stands on the rim of a merry-go-round of radius 2.0 m that is not moving. The rotational inertia of the merry-go-round (including the girl’s inertia) is 800 kg∙m2. She throws a rock of mass 0.5 kg horizontally in a direction that is tangent to the outer edge of the merry-go-round. The speed of the rock, relative to the ground, is 4.0 m/s. (a) What is the angular speed of the merry-go-round? (b) What is the speed of the...

Show that the moment of inertia of a spherical shell of radius R and mass M...

Show that the moment of inertia of a spherical shell of radius R and mass M about an axis through its centre is 2/3 MR2. Show also that the moment of inertia of a uniform solid sphere of radius R and mass M is 2/5MR2. The spheres are allowed to roll (from rest), without slipping a distance L down a plane inclined at a angle θ to the horizontal. Find expressions for the speeds of the spheres at the bottom...

Find the moment of inertia of a circular disk of radius R and mass M that...

Find the moment of inertia of a circular disk of radius R and mass M that rotates on an axis passing through its center. [Answer: ½ MR2] Step 1: Pictorial representation: Sketch a neat picture to represent the situation. Step 2: Physical representation: 1) Cut the disk into many small rings as it has the circular symmetry. 2) Set up your coordinate system and choose its origin at the pivot point (or the axle location) for convenience. Then choose a...

The moment of inertia of a thin ring of mass M and radius R about its...

The moment of inertia of a thin ring of mass M and radius R about its symmetry axis is ICM = MR2 Kira is working the ring-toss booth at a local carnival. While waiting for customers, Kira occupies her time by twirling one of the plastic rings of mass M and radius R about her finger. Model the motion of the plastic ring as a thin ring rotating about a point on its circumference. What is the moment of inertia of...

A merry-go-round consists of a uniform ring of mass 2M and radius R attached to a...

A merry-go-round consists of a uniform ring of mass 2M and radius R attached to a central post with four light, uniform rods, each of mass M/4 and length R. Identical twins sit opposite one another where two of the rods join the ring. The mass of each child is M. At time t = 0, the system is rotating with angular speed ω0. The twins then simultaneously pull themselves toward one another along their respective rods, until each twin...

Subjects