Question
In: Physics
1) A ladder whose length L is 12 m and mass m are 45 kg rests...
1) A ladder whose length L is 12 m and mass m are 45 kg rests against a wall. Its upper end is a distance h of 9.3 m above the ground. The center of mass of the ladder is one-third of the way up the ladder. A fire fighter whose mass M is 72 kg climbs the ladder until his center of mass is halfway up. Assume the wall but not the ground is frictionless. What forces are exerted on the ladder by the wall and by the ground? Provide both the magnitude and direction of the ground and wall forces.
Solutions
Expert Solution
In order to find the force due
to wall and ground we have to consider the torque about a point and
then we have to consider the net force in x and y direction
genius_generous answered 2 years agoRelated Solutions
A ladder of length L = 2.3 m and mass m = 14 kg rests on...
A ladder of length L = 2.3 m and mass m = 14 kg rests on a floor
with coefficient of static friction μs = 0.54. Assume
the wall is frictionless.
A person with mass M = 69 kg now stands at the very top of the
ladder.
What is the normal force the floor exerts on the ladder?
What is the minimum angle to keep the ladder from sliding?
A ladder of length L = 2.8 m and mass m = 16 kg rests on...
A ladder of length L = 2.8 m
and mass m = 16 kg rests on a floor with coefficient of static
friction ?s = 0.51. Assume the wall is
frictionless.
1)
What is the normal force the floor exerts on the ladder?
2) What is the minimum angle the
ladder must make with the floor to not slip?
3) A person with mass M = 69 kg now
stands at the very top of the ladder. What is the...
A uniform stationary ladder of length L = 4.2 m and mass M = 19 kg...
A uniform stationary ladder of length L = 4.2 m and mass M = 19
kg leans against a smooth vertical wall, while its bottom legs rest
on a rough horizontal floor. The coefficient of static friction
between floor and ladder is μ = 0.38. The ladder makes an angle θ =
53° with respect to the floor. A painter of mass 8M stands on the
ladder a distance d from its base.
a. Find the magnitude of the normal...
Problem 21: A uniform stationary ladder of length L = 3.7 m and mass M =...
Problem 21: A uniform stationary ladder of length L = 3.7 m and
mass M = 19 kg leans against a smooth vertical wall, while its
bottom legs rest on a rough horizontal floor. The coefficient of
static friction between floor and ladder is μ = 0.44. The ladder
makes an angle θ = 56° with respect to the floor. A painter of mass
8M stands on the ladder a distance d from its base.
Part (a) Find the magnitude...
A beam of length L and mass M rests on two pivots. The first pivot is...
A beam of length L and mass M rests on two pivots. The first
pivot is at the left end, taken as the origin, and the second pivot
is at a distance , from the left end. A woman of mass m starts at
the left end and walks toward the right end. When the beam is on
the verge of tipping, find symbolic expressions for (a) the normal
force exerted by the second pivot in terms of M, m,...
A uniform ladder of length L and mass m leans against a frictionless vertical wall, making...
A uniform ladder of length L and mass m leans against a
frictionless vertical wall, making an angle of 57° with the
horizontal. The coefficient of static friction between the ladder
and the ground is 0.42. If your mass is four times that of the
ladder, how high can you climb before the ladder begins to
slip?
L
A uniform ladder of length L and mass m leans against a frictionless vertical wall, making...
A uniform ladder of length L and mass m leans
against a frictionless vertical wall, making an angle of 55° with
the horizontal. The coefficient of static friction between the
ladder and the ground is 0.40. If your mass is four times that of
the ladder, how high can you climb before the ladder begins to
slip?
A simple pendulum with mass m = 1.6 kg and length L = 2.79 m hangs...
A simple pendulum with mass m = 1.6 kg and length L = 2.79 m
hangs from the ceiling. It is pulled back to an small angle of θ =
10.7° from the vertical and released at t = 0.
A)What is the period of oscillation?
B)What is the magnitude of the force on the pendulum bob
perpendicular to the string at t=0?
C)What is the maximum speed of the pendulum?
D)What is the angular displacement at t = 3.62...
A simple pendulum with mass m = 2.3 kg and length L = 2.67 m hangs...
A simple pendulum with mass m = 2.3 kg and length L = 2.67 m
hangs from the ceiling. It is pulled back to an small angle of θ =
9.4° from the vertical and released at t = 0.
What is the maximum speed of the pendulum?
4)
What is the angular displacement at t = 3.57 s? (give the answer
as a negative angle if the angle is to the left of the
vertical)
5)
What is the...
A simple pendulum with mass m = 1.3 kg and length L = 2.62 m hangs...
A simple pendulum with mass m = 1.3 kg and length L = 2.62 m
hangs from the ceiling. It is pulled back to an small angle of ? =
11.6° from the vertical and released at t = 0.
What is the period of oscillation?
What is the magnitude of the force on the pendulum bob
perpendicular to the string at t=0?
What is the
maximum speed of the pendulum?
What is the
angular displacement at t = 3.67...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Suppose Rialto is the only movie cinema in a small college town, so it is essentially...
- With VMI, members of the supply chain share planning, demand, forecasting, and inventory information.
- Large lots are desirable in supply chain coordination despite increasing holding costs.
- ***Convert the C++ to Python*** #include <iostream> using std::cout; using std::cin; using std::endl; int charClass; char...
- Make-or-Buy Decision Fremont Computer Company has been purchasing carrying cases for its portable computers at a...
- The following costs were incurred for the single product produced during the first year of operations...
- Non-constant growth model: Do=$2.00 required return on equity= 5% g= 9% n=1,2 g=7% n=3,4 g=3% n=5...
ADVERTISEMENT