Question

In: Physics

Three long wires are connected to a meterstick and hang down freely. Wire 1 hangs from...

Three long wires are connected to a meterstick and hang down freely. Wire 1 hangs from the 50-cm mark at the center of the meterstick and carries 1.50 A of current upward. Wire 2 hangs from the 70-cm mark and carries 4.00 A of current downward. Wire 3 is to be attached to the meterstick and to carry a specific current, and we want to attach it at a location that results in each wire experiencing no net force. (a) [8 pts.] Determine the position of wire 3. (b) [8 pts.] Determine the magnitude and direction of current in wire 3.

Solutions

Expert Solution


Related Solutions

Four long straight wires are laid out on a grid as follows: Wire 1 is carrying...
Four long straight wires are laid out on a grid as follows: Wire 1 is carrying a current of 1.00 A upward on the page along the line x = 0 Wire 2 is carrying a current of 2.00 A rightward on the page along the line y = 4.00 m Wire 3 is carrying a current of 3.00 A downward on the page along the line x = 5.00 m Wire 4 is carrying a current of 4.00 A...
Two long, straight wires are separated by 2 m with wire 1 being on the left...
Two long, straight wires are separated by 2 m with wire 1 being on the left and wire 2 being on the right. Both wires carry currents of 8.5 A in opposite directions. Find the magnitude of the net magnetic field: a) 4 m to the left of wire 1 BL= __________ T b) In the middle, between both wires BM = __________ T c) 4 m to the right of wire 2 BR = __________ T
Two long straight parallel wires are 11 cm apart. Wire A carries 2.0-A current. Wire B's...
Two long straight parallel wires are 11 cm apart. Wire A carries 2.0-A current. Wire B's current is 5.0 A in the same direction. Determine the magnetic field magnitude due to wire A at the position of wire B. Determine the magnetic field due to wire B at the position of wire A Are these two magnetic fields equal and opposite? Determine the force per unit length on wire A due to wire B. Determine the force per unit length...
Three long, straight wires are seen end-on in the figure below. The distance between the wires...
Three long, straight wires are seen end-on in the figure below. The distance between the wires is r = 0.260 m. Wires A and B carry current IA = IB = 1.66 A, and wire C carries current IC = 3.18 A. Assume (for example) the only forces exerted on wire A are due to wires B and C. Find the force per unit length exerted on the following. (Express your answers in vector form.) (a) wire A fA =...
Four blocks are connected by a weightless cord. Block A hangs from a table on the...
Four blocks are connected by a weightless cord. Block A hangs from a table on the left. Block B and C rest upon the table. Block D hangs from the table on the right. Block A and D are over pulleys. Block B has a weight of 1N, Block C=4N and Block D=7N. a. Find the weight of Block A such that the accelartion of Block B is (g/7) b. Find the coefficient of friction for the table, if the...
The current through a 83 m long wire connected to a battery is 2.7 A. A...
The current through a 83 m long wire connected to a battery is 2.7 A. A section of the wire is cut off and used to build a circuit. When the remaining wire is connected to the same battery as before the current in the wire is 3.9 A. How much wire is left?
Two long, parallel wires are separated by 3.0 m. Each wire has a 31-A current, but...
Two long, parallel wires are separated by 3.0 m. Each wire has a 31-A current, but the currents are in opposite directions. A) Determine the magnitude of the net magnetic field midway between the wires. B) Determine the magnitude of the net magnetic field at a point 1.5 m to the side of one wire and 4.5 m from the other wire. The point is in the same plane as the wires.
An unbalanced three-phase wye-connected and grounded load is connected to a balanced three-phase four-wire source. The...
An unbalanced three-phase wye-connected and grounded load is connected to a balanced three-phase four-wire source. The load impedances are Za = 14+j3 Ω , Zb = 5-j24Ω and Zc =1+j14 Ω  and the phase a line voltage has an effective value of 18 Kv: use line-to-neutral voltage of phase A as a reference. Find the line and neutral current, also find the reactive power delivered to load and power factor.
Three 90.790.7 g masses are connected in a triangular shape by massless rigid wires as shown...
Three 90.790.7 g masses are connected in a triangular shape by massless rigid wires as shown in the first image (which is not drawn to scale). The coordinates of each mass are given in centimeters. Mass A is located at (0,0)(0,0), mass B is at (10.2,19.5)(10.2,19.5), and mass C is at (17.3,13.4)(17.3,13.4). Find the xx- and yy‑coordinates of the center of mass of the triangular object. Two more 90.790.7 g masses are connected by a straight piece of wire and...
Three 81.6 g masses are connected in a triangular shape by massless rigid wires as shown...
Three 81.6 g masses are connected in a triangular shape by massless rigid wires as shown in the first image (which is not drawn to scale). The coordinates of each mass are given in centimeters. Mass A is located at (0,0) , mass B is at (12.2,22.5) , and mass C is at (21.3,13.4) . Find the ? - and ? ‑coordinates of the center of mass of the triangular object. A graph has a vertical Y axis and a...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT