When a crate with mass 23.0 kgkg is placed on a ramp that is inclined at...

When a crate with mass 23.0 kgkg is placed on a ramp that is inclined at an angle αα below the horizontal, it slides down the ramp with an acceleration of 4.9 m/s2m/s2. The ramp is not frictionless. To increase the acceleration of the crate, a downward vertical force F⃗ F→ is applied to the top of the crate.

a. What must FF be in order to increase the acceleration of the crate so that it is 9.8 m/s2m/s2?

b. how does the value of F that you calculated compare to the weight of the crate?

Solutions

Expert Solution

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

A 35.0-kg crate is initially at rest at the top of a ramp that is inclined...

A 35.0-kg crate is initially at rest at the top of a ramp that is inclined at an angle θ = 30◦ above the horizontal. You release the crate and it slides 1.25 m down the ramp before it hits a spring attached to the bottom of the ramp. The coefficient of kinetic friction between the crate and the ramp is 0.500 and the constant of the spring is k = 6000 N/m. What is the net impulse exerted on...

A 50 kg crate slides down a ramp that is inclined by 30 degrees from the...

A 50 kg crate slides down a ramp that is inclined by 30 degrees from the horizontal. The acceleration of the crate parallel to the surface of the ramp is 2.0m/s^2, and the length of the ramp is 10m. Determine the kinetic energy accumulated by the crate when it reaches the bottom of the ramp if it started from rest at the top of the incline. Calculate the amount of energy lost by the crate due to friction in its...

The tongs are used to lift the 150-kgkg crate, whose center of mass is at GG....

The tongs are used to lift the 150-kgkg crate, whose center of mass is at GG. Suppose that θθtheta = 26 deg∘. (Figure 1) Determine the least coefficient of static friction at the pivot blocks so that the crate can be lifted. Express your answer using three significant figures.

A crate of mass 100.0 kg rests on a rough surface inclined at an angle of...

A crate of mass 100.0 kg rests on a rough surface inclined at an angle of 37.0° with the horizontal. A massless rope to which a force can be applied parallel to the surface is attached to the crate and leads to the top of the incline. In its present state, the crate is just ready to slip and start to move down the plane. The coefficient of friction is 80% of that for the static case a. What is the...

A box of mass m=19.0 kg is pulled up a ramp that is inclined at an...

A box of mass m=19.0 kg is pulled up a ramp that is inclined at an angle θ=15.0∘ angle with respect to the horizontal. The coefficient of kinetic friction between the box and the ramp is μk=0.295 , and the rope pulling the box is parallel to the ramp. If the box accelerates up the ramp at a rate of a=3.09 m/s2, calculate the tension FT in the rope. Use g=9.81 m/s2 for the acceleration due to gravity.

1. A 4 kg mass is resting on a ramp inclined at an angle of 30...

1. A 4 kg mass is resting on a ramp inclined at an angle of 30 degrees with respect to the horizontal. A string is attached to the 4 kg mass and passes over a frictionless pulley and is connected to a 5 kg mass hanging over the side. If the coefficient of friction between the ramp and the 4 kg mass if 0.3 find; A) The acceleration of both masses B) The tension in the string C) Find the...

A block of mass m = 2.1 kg slides down a 36 ° inclined ramp that...

A block of mass m = 2.1 kg slides down a 36 ° inclined ramp that has a height h = 3.1 m. At the bottom, it hits a block of mass M = 7.1 kg that is at rest on a horizontal surface. Assume a smooth transition at the bottom of the ramp. If the collision is elastic and friction can be ignored, determine the distance the mass m will travel up the ramp after the collision.

A small block with mass 1.50 kgkg is placed against a light spring that is compressed...

A small block with mass 1.50 kgkg is placed against a light spring that is compressed 0.250 mm. The spring has force constant 50.0 N/mN/m . The block and spring are released from rest, and the block travels along a horizontal surface for which the coefficient of kinetic friction between the block and surface is μkμk = 0.500. When the block has moved 0.250 mm and the spring has reached its equilibrium length, the block loses contact with the spring....

A 20.0 kg package is positioned at the bottom of an inclined ramp. The ramp has...

A 20.0 kg package is positioned at the bottom of an inclined ramp. The ramp has a length of 15.0 m, and an inclination angle of 34.0°above the horizontal floor. A constant force having a magnitude 290 N, and directed parallel to the horizontal floor, is applied to the package in order to push it up the ramp. While the package is moving, the ramp exerts a constant frictional force of 65.0 N on it. a. Draw a free-body diagram...

A small block of mass m and charge Q is placed on an insulated, frictionless, inclined...

A small block of mass m and charge Q is placed on an insulated, frictionless, inclined plane of angle θ as in the figure below. An electric field is applied parallel to the incline. A block of mass m and charge Q rests on an inclined plane that makes an angle θ with the horizontal. (a) Find an expression for the magnitude of the electric field that enables the block to remain at rest. (Use any variable or symbol stated...

Subjects