A 25.0-kg crate is initially at rest at the top of a ramp that is inclined...

A 25.0-kg crate is initially at rest at the top of a ramp that is inclined at an angle θ = 30.0 ◦ above the horizontal. You release the crate and it slides 1.25 m down the ramp before it hits a spring attached to the bottom of the ramp. The coefficient of kinetic friction between the crate and the ramp is 0.400 and the constant of the spring is k = 5000 N/m. How far does the crate compress the spring?

Expert Solution

If you have any doubt in the solution, let me know writing in the comment box.

genius_generous answered 2 months ago

A 35.0-kg crate is initially at rest at the top of a ramp that is inclined...

A 35.0-kg crate is initially at rest at the top of a ramp that is inclined at an angle θ = 30◦ above the horizontal. You release the crate and it slides 1.25 m down the ramp before it hits a spring attached to the bottom of the ramp. The coefficient of kinetic friction between the crate and the ramp is 0.500 and the constant of the spring is k = 6000 N/m. What is the net impulse exerted on...

A 50 kg crate slides down a ramp that is inclined by 30 degrees from the...

A 50 kg crate slides down a ramp that is inclined by 30 degrees from the horizontal. The acceleration of the crate parallel to the surface of the ramp is 2.0m/s^2, and the length of the ramp is 10m. Determine the kinetic energy accumulated by the crate when it reaches the bottom of the ramp if it started from rest at the top of the incline. Calculate the amount of energy lost by the crate due to friction in its...

When a crate with mass 23.0 kgkg is placed on a ramp that is inclined at...

When a crate with mass 23.0 kgkg is placed on a ramp that is inclined at an angle αα below the horizontal, it slides down the ramp with an acceleration of 4.9 m/s2m/s2. The ramp is not frictionless. To increase the acceleration of the crate, a downward vertical force F⃗ F→ is applied to the top of the crate. a. What must FF be in order to increase the acceleration of the crate so that it is 9.8 m/s2m/s2? b....

A dockworker loading crates on a ship finds that a 34-kg crate, initially at rest on...

A dockworker loading crates on a ship finds that a 34-kg crate, initially at rest on a horizontal surface, requires a 73-N horizontal force to set it in motion. However, after the crate is in motion, a horizontal force of 50 N is required to keep it moving with a constant speed. Find the coefficients of static and kinetic friction between crate and floor

A block of mass m1 = 1 kg is initially at rest at the top of...

A block of mass m1 = 1 kg is initially at rest at the top of an h1 = 1 meter high ramp, see Fig. 2 below. It slides down the frictionless ramp and collides elastically with a block of unknown mass m2, which is initially at rest. After colliding with m2, mass m1 recoils and achieves a maximum height of only h2 = 0.33 m going back up the frictionless ramp. (HINT: Solving each part in sequence will guide...

A 20.0 kg package is positioned at the bottom of an inclined ramp. The ramp has...

A 20.0 kg package is positioned at the bottom of an inclined ramp. The ramp has a length of 15.0 m, and an inclination angle of 34.0°above the horizontal floor. A constant force having a magnitude 290 N, and directed parallel to the horizontal floor, is applied to the package in order to push it up the ramp. While the package is moving, the ramp exerts a constant frictional force of 65.0 N on it. a. Draw a free-body diagram...

A toy car with a mass of 1 kg starts from rest at the top of a ramp at point A.

A toy car with a mass of 1 kg starts from rest at the top of a ramp at point A. The toy car is released from rest, rolls 2.0 meters down the ramp, then another 3.0 meters across the floor to point B where its speed is measured to be 4.24 m/s. The air exerts a resistance force of 2.0 N on the car as it moves from A to B. Find the initial height of the car at...

A 0.3 Kg ball is initially at rest at the top left side of a frictionless...

A 0.3 Kg ball is initially at rest at the top left side of a frictionless incline plane: The incline is 0.25 m height and has a length of 0.65 m. a) What is the initial Gravitational Potential Energy of the Ball at the top of the incline? b) What will be the final Kinetic energy of the ball at the bottom right side of the incline? c) If there were friction between the ball and the incline, what would...

A box of mass ?=20.5 kg is pulled up a ramp that is inclined at an...

A box of mass ?=20.5 kg is pulled up a ramp that is inclined at an angle ?=19.0∘ angle with respect to the horizontal. The coefficient of kinetic friction between the box and the ramp is ?k=0.305 , and the rope pulling the box is parallel to the ramp. If the box accelerates up the ramp at a rate of ?=2.89 m/s2 , calculate the tension ?T in the rope. Use ?=9.81 m/s2 for the acceleration due to gravity.

To push a crate of mass 55 kg up a frictionless ramp with an angle of...

To push a crate of mass 55 kg up a frictionless ramp with an angle of 50 ° to the horizontal, a worker exerts a force of 1050 N parallel to the incline. The crate moves a distance of 5 m What work is done on the crate by the worker? J Tries 0/2 What work is done by the weight of the crate? J Tries 0/2 What work is done by the normal force exerted by the floor on...

Question