Question

In: Accounting

“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...

“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $19 per drum, we would be paying $5.80 less than it costs us to manufacture the drums in our own plant. Since we use 70,000 drums a year, that would be an annual cost savings of $406,000.” Antilles Refining’s current cost to manufacture one drum is given below (based on 70,000 drums per year):

Direct materials $ 10.60
Direct labor 6.00
Variable overhead 2.00
Fixed overhead ($3.80 general
company overhead, $1.50 depreciation,
and, $0.90 supervision)
6.20
Total cost per drum $ 24.80

A decision about whether to make or buy the drums is especially important at this time because the equipment being used to make the drums is completely worn out and must be replaced. The choices facing the company are:

Alternative 1: Rent new equipment and continue to make the drums. The equipment would be rented for $189,000 per year.

Alternative 2: Purchase the drums from an outside supplier at $19 per drum.

The new equipment would be more efficient than the equipment that Antilles Refining has been using and, according to the manufacturer, would reduce direct labor and variable overhead costs by 30%. The old equipment has no resale value. Supervision cost ($63,000 per year) and direct materials cost per drum would not be affected by the new equipment. The new equipment’s capacity would be 100,000 drums per year.

The company’s total general company overhead would be unaffected by this decision. (Round all intermediate calculations to 2 decimal places.)

Required:

1. Assuming that 70,000 drums are needed each year, what is the financial advantage (disadvantage) of buying the drums from an outside supplier?

2. Assuming that 90,000 drums are needed each year, what is the financial advantage (disadvantage) of buying the drums from an outside supplier?

3. Assuming that 100,000 drums are needed each year, what is the financial advantage (disadvantage) of buying the drums from an outside supplier?

(For all requirements, enter any "disadvantages" as a negative value. Do not round intermediate calculations.)

Solutions

Expert Solution

Answer 1 =
Alternative 1 = Make the drum inside of the Factory
If Antilles Refining Manufacture the drum then
1) Factory overhead will not Be Change
Particulars Amounts Total
Direct Materials $             10.60 $                                                        742,000.00
Dierct Labour $               4.20 $                                                        294,000.00
Variable Overhead $               1.40 $                                                           98,000.00
Total Variable Cost $             16.20 $                                                     1,134,000.00
Increase in Fixed overhead due to purchase of new equipment $                                                        189,000.00
Total incremental cost $                                                     1,323,000.00
Per unit cost $                                                                   18.90
Alternatvie 2 = Purchasing the carrying cases from Outside @ $ 19 per unit
Buying drum from outside supllier will be having disadvantage of $ 0.10 per unit
Answer 2 =
Alternative 1 = Make the drum inside of the Factory
If Antilles Refining Manufacture the drum then
1) Factory overhead will not Be Change
Particulars Amounts Total
Direct Materials $             10.60 $                                                        954,000.00
Dierct Labour $               4.20 $                                                        378,000.00
Variable Overhead $               1.40 $                                                        126,000.00
Total Variable Cost $             16.20 $                                                     1,458,000.00
Increase in Fixed overhead due to purchase of new equipment $                                                        189,000.00
Total incremental cost $                                                     1,647,000.00
Per unit cost $                                                                   18.30
Alternatvie 2 = Purchasing the carrying cases from Outside @ $ 19 per unit
Buying drum from outside supllier will be having disadvantage of $ 0.70 per unit
Answer 3 =
Alternative 1 = Make the drum inside of the Factory
If Antilles Refining Manufacture the drum then
1) Factory overhead will not Be Change
Particulars Amounts Total
Direct Materials $             10.60 $                                                     1,060,000.00
Dierct Labour $               4.20 $                                                        420,000.00
Variable Overhead $               1.40 $                                                        140,000.00
Total Variable Cost $             16.20 $                                                     1,620,000.00
Increase in Fixed overhead due to purchase of new equipment $                                                        189,000.00
Total incremental cost $                                                     1,809,000.00
Per unit cost $                                                                   18.09
Alternatvie 2 = Purchasing the carrying cases from Outside @ $ 19 per unit
Buying drum from outside supllier will be having disadvantage of $ 0.91 per unit

Related Solutions

“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $20 per drum, we would be paying $5.25 less than it costs us to manufacture the drums in our own plant. Since we use 95,000 drums a year, that would be an annual cost savings of $498,750.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $21 per drum, we would be paying $7.05 less than it costs us to manufacture the drums in our own plant. Since we use 65,000 drums a year, that would be an annual cost savings of $458,250.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $19 per drum, we would be paying $5.35 less than it costs us to manufacture the drums in our own plant. Since we use 60,000 drums a year, that would be an annual cost savings of $321,000.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $20 per drum, we would be paying $4.45 less than it costs us to manufacture the drums in our own plant. Since we use 65,000 drums a year, that would be an annual cost savings of $289,250.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $19 per drum, we would be paying $6.45 less than it costs us to manufacture the drums in our own plant. Since we use 60,000 drums a year, that would be an annual cost savings of $387,000.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $19 per drum, we would be paying $4.80 less than it costs us to manufacture the drums in our own plant. Since we use 70,000 drums a year, that would be an annual cost savings of $336,000.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $19 per drum, we would be paying $5.35 less than it costs us to manufacture the drums in our own plant. Since we use 60,000 drums a year, that would be an annual cost savings of $321,000.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $21 per drum, we would be paying $4.85 less than it costs us to manufacture the drums in our own plant. Since we use 50,000 drums a year, that would be an annual cost savings of $242,500.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $21 per drum, we would be paying $6.25 less than it costs us to manufacture the drums in our own plant. Since we use 75,000 drums a year, that would be an annual cost savings of $468,750.” Antilles Refining’s current cost to manufacture one drum is given below...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s...
“In my opinion, we ought to stop making our own drums and accept that outside supplier’s offer,” said Wim Niewindt, managing director of Antilles Refining, N.V., of Aruba. “At a price of $20 per drum, we would be paying $6.40 less than it costs us to manufacture the drums in our own plant. Since we use 65,000 drums a year, that would be an annual cost savings of $416,000.” Antilles Refining’s current cost to manufacture one drum is given below...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT