Question

In: Mechanical Engineering

An exhaust fan systems consists of 4 parallel v-belts wrapped around driver pulleys A and driven...

An exhaust fan systems consists of 4 parallel v-belts wrapped around driver pulleys A and driven pulley B with a diameter of 100 mm and 240 mm respectively. Coefficient of friction, μ between belt and pulleys is known as 0.25. Pulley groove, α has been design at an angle of 60°. The maximum permissible tension is 3860 N, cross-sectional area of the belt is A = 160 mm2 and density of belt’s material ρ = 1000 kg/m3. If the driver pulley A and driven pulley B rotates at a speed of 1800 RPM and 700 RPM individually due to slippages.

(i) Find the angle of contact of pulley A, given the pulley centre to centre distance is 1000 mm.

(ii) Calculate the tension distributed by centrifugal forces in one V-belt.

(iii) Deduce total power transmitted by the driver pulley A.

(iv) Deduce total power received by the driven pulley B.

(v) Find the belt slip percentage at pulley B

Solutions

Expert Solution


Related Solutions

An exhaust fan systems consists of 4 parallel v-belts wrapped around driver pulleys A and driven...
An exhaust fan systems consists of 4 parallel v-belts wrapped around driver pulleys A and driven pulley B with a diameter of 100 mm and 240 mm respectively. Coefficient of friction, μ between belt and pulleys is known as 0.25. Pulley groove, α has been design at an angle of 60°. The maximum permissible tension is 3860 N, cross-sectional area of the belt is A = 160 mm2 and density of belt’s material ρ = 1000 kg/m3. If the driver...
The mutual inductance between a long insulated coil wrapped around a solenoid is 4.0 x 10-4...
The mutual inductance between a long insulated coil wrapped around a solenoid is 4.0 x 10-4 H. If the current in the solenoid drops at a constant rate from 15.0 A to zero in 0.076 s, what is the magnitude of the emf induced in the coil?
4. A car of mass m is traveling with constant speed v around a circular banked...
4. A car of mass m is traveling with constant speed v around a circular banked road of radius R, see the side view and the free-body diagram. a) Apply Newton’s 2nd law to the car, i.e. write equations for the centripetal, angular, and vertical components of the net force. b) Determine the angle θ at which the road should be banked so that no static friction is required to drive the car. Now, include the static friction force FS...
Two loads connected in parallel draw a total of 4 kW at 0.68pf lagging from a 120-v ms, 60-Hz line.
Two loads connected in parallel draw a total of 4 kW at 0.68pf lagging from a 120-v ms, 60-Hz line. One load absorbs 3.3 kVAR at a 0.6 pf lagging. Determine: a) The pf of the second loadb) The capacitor value in Farads required to correct the overall pf from 0.68 to 0.9 lagging for combine loads. c) The current drawn from the supply under the new power factor of 09.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT