Question

In: Chemistry

Response time: What is the pH electrode response time, if the response time is considered to...

Response time: What is the pH electrode response time, if the response time is considered to be 90% of the total signal change? Discuss

Solutions

Expert Solution

In technology, response time is the time a system or functional unit takes to react to a given input.

In real-time systems the response time of a task or thread is defined as the time elapsed between the dispatch (time when task is ready to execute) to the time when it finishes its job (one dispatch). Response time is different from WCET which is the maximum time the task would take if it were to execute without interference. It is also different from deadline which is the length of time during which the task's output would be valid in the context of the specific system.

Response time is the amount of time a pixel in a display takes to change. It is measured in milliseconds (ms). Lower numbers mean faster transitions and therefore fewer visible image artifacts. Older monitors with long response times would create display motion blur around moving objects, making them unacceptable for rapidly moving images. Typically response times are usually measured from grey-to-grey transitions, but there is no industry standard.


Related Solutions

What is the pH electrode response time, if the response time is considered to be 90%...
What is the pH electrode response time, if the response time is considered to be 90% of the total signal change? Discuss
Consider a glass electrode or [pH electrode (combination electrode). a. Identify the reference part. b. Identify...
Consider a glass electrode or [pH electrode (combination electrode). a. Identify the reference part. b. Identify the indicator part. c. Explain how the potential of the electrode is determined. d. Describe a two-point calibration of the electrode. e. State any five of the eight possible errors that might occur in pH measurements with the electrode.
When measuring with a pH electrode, several things limit the accuracy of the measurement. In each...
When measuring with a pH electrode, several things limit the accuracy of the measurement. In each of the following situations, describe what would cause the observed effect: A. Acid error occurs when the pH is too low. Example, you have a 0.5 M solution of HCl, but your probe provides a measured pH of 0.50 B. Sodium error occurs when the pH is too high. Example, you have a 0.5 M solution of NaOH, but measure a pH of 13.00...
A student was given buffer solutions to calibrate the pH electrode that were labeled incorrectly. The...
A student was given buffer solutions to calibrate the pH electrode that were labeled incorrectly. The pH's of both buffer solutions were actually lower than the pH's shown on the labels. Explain how such an error would affect the experimental result for the Ka of acetic acid.
An MnO2(s) /Mn2+(aq) electrode in which the pH is 10.18 is prepared. Part A Find the...
An MnO2(s) /Mn2+(aq) electrode in which the pH is 10.18 is prepared. Part A Find the [Mn2+] necessary to lower the potential of the half-cell to 0.00 V (at 25 ∘C). Express your answer using two significant figures. [Mn2+] =
Say you are given a buffer at 25 C in pH 6.881. The glass combination electrode...
Say you are given a buffer at 25 C in pH 6.881. The glass combination electrode gave a reading of -18.3 mV. When it was placed in a pH 4.002 buffer at 25 C, this same electrode gave a reading of +146.3 mV. What is the electromotive efficiency of the glass electrode? (3 sig figs)
What is the difference between the Normal Hydrogen Electrode (NHE) and the Reversible Hydrogen Electrode (RHE)?...
What is the difference between the Normal Hydrogen Electrode (NHE) and the Reversible Hydrogen Electrode (RHE)? - Also, if a redox happens at the NHE of 0.2 V, please calculate the potential for the RHE at pH = 1.
What is the difference between the Normal Hydrogen Electrode (NHE) and the Reversible Hydrogen Electrode (RHE)?...
What is the difference between the Normal Hydrogen Electrode (NHE) and the Reversible Hydrogen Electrode (RHE)? - Also, if a redox happens at the NHE of 0.2 V, please calculate the potential for the RHE at pH = 1.
Describe the response mechanism of the fluoride-ion-selective electrode. Explain why the OH- is the major interfering...
Describe the response mechanism of the fluoride-ion-selective electrode. Explain why the OH- is the major interfering ion in F- ISE measrements.
a persons blood ph of 7.20 is considered acidosis , even though this ph is above...
a persons blood ph of 7.20 is considered acidosis , even though this ph is above 7 on the ph scale. explain why?
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT