Question
In: Computer Science
Atmega128 and Pic24e have the reset interrupt at the program address 0x0. Write a function reset()...
Atmega128 and Pic24e have the reset interrupt at the program address 0x0. Write a function reset() that works for both chips to reset a program.
Solutions
venereology answered 2 years agoRelated Solutions
Atmega128 and Pic24e have the reset interrupt at the program address 0x0. Write a function reset()...
Atmega128 and Pic24e have the reset interrupt at the program
address 0x0. Write a function reset() that works for both chips to
reset a program.
This is a atmega128 source to make a clock using the timer interrupt. I want to...
This is a atmega128 source to make a clock using the
timer interrupt. I want to add source if i press switch
(PIND==0x0FE&&PIND==0x0FD) then below program would be
running .
#include<io.h>
int
position=0,BJT[4]={0xFE,0xFD,0xFB,0xF7};
int
number=0,segment[10]={0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90};
int msec=0, sec=0, min=0;
void main()
{
DDRA=0xFF;
PORTA=0XFF;
DDRB=0xFF;
PORTB=0xFF;
TCCR0=0x04;
TIMSK=0x01;
SREG=0x80;
while(1){}
}
interrupt[TIM0_OVF]void timer0_ovf_isr()
{
TCNT0=0x06;
PORTA=BJT[position];
if(position==0)number=sec%10;
if(position==1)number=sec/10;
if(position==2)number=min%10;
if(postion==3)number=min/10;
PORTB=segment[number];
position++;
if(position>3)position=0;
msec++;
if(msec==1000)
{
msec=0;
sec++;
}
if(sec==60)
{
sec=0;
min++;
}
if(min==60)min=0;
}
How does an interrupt differ from a subroutine? When an interrupt occurs, where does program control...
How does an interrupt differ from a subroutine? When an
interrupt occurs, where does program control branch to?
write a python program, please. Create a program that uses the Gettysburg Address as input and...
write a python program, please.
Create a program that uses the Gettysburg Address as input and
outputs a list
of tuples for every two words. For example: [('Four',
'score'),('and',
'seven'), ...].
Make a C program to blink/toggle a LED every second with the Atmega128 chip. Hint: Because...
Make a C program to blink/toggle a LED every second with the
Atmega128 chip.
Hint: Because the delay function has a maximum delay limit, you
will need an internal counter to accumulate delays to one
second.
a) Write code that uses the timer interrupt for
implementation.
b) Write code that uses stopwatch on the second toggle in Atmel
Studio
Make a C program to blink/toggle a LED every second with the Atmega128 chip. Hint: Because...
Make a C program to blink/toggle a LED every second with the
Atmega128 chip.
Hint: Because the delay function has a maximum delay limit, you
will need an internal counter to accumulate delays to one
second.
a) Write code that uses the delay function for
implementation
b) Write code that uses a stopwatch on the third toggle
Write the following function and provide a program to test it (main and function in one...
Write the following function and provide a program to test it
(main and function in one .py)
def repeat(string, n, delim)
that returns the string
string repeated n times, separated by the string
delim. For example repeat(“ho”, 3, “,”) returns “ho, ho,
ho”.
keep it simple.Python
Write a program that utilizes a function called paymentCalc. In the main body of the program,...
Write a program that utilizes a function called paymentCalc. In
the main body of the program, ask the user what is their principal
and how many months they want the loan. If it is easier, ask the
user for number of years, but don’t forget to change it to months
for the calculation. Use a function to calculate their monthly
mortgage payment. In the main body of the program, print out what
their monthly mortgage payment will be. For simplicity,...
write C++ program using functions (separate function for each bottom) Write a program to find if...
write C++ program using functions
(separate function for each bottom)
Write a program to find if a number is large word for two given
bottom base - bottom1 and bottom2. You can predict that a number,
when converted to any given base shall not exceed 10 digits. .
the program should ask from user to enter a number that it
should ask to enter the base ranging from 2 to 16 after that it
should check if the number is...
(C++ ) ·In “recursive.cpp”, write a recursive function minDoub() which: ·returns the address of the smallest...
(C++ )
·In “recursive.cpp”, write a recursive
function minDoub() which:
·returns the address of the smallest
value in the array. If the array is empty, return the “end”
pointer
·and takes as parameters:
(1) a pointer to
double. The pointer is the address of the start of an array,
(2) the “end” pointer
to the address after the array
(3) and the address
of the smallest value seen so far
·Write main() to test this function –
try a case where the array...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- In 1941, President Roosevelt spoke about the “four freedoms.” For many in the country, however, these...
- Your friend is looking for investors in a risky business venture. To convince you to participate,...
- Suppose you observe the following situation: State of Economy Probability of State Return if State Occurs...
- Merger Analysis TransWorld Communications Inc., a large telecommunications company, is evaluating the possible acquisition of Georgia...
- Journal Entries and Trial Balance Elite Realty acts as an agent in buying, selling, renting, and...
- In racket Assume that the elements of a list are indexed starting with 1. Write a...
- Describe System Development Life Cycle (SDLC) and how it is used.
ADVERTISEMENT