A wooden cylinder has the dimension: diameter, d = 40 cm and height, hcyl = 40...

A wooden cylinder has the dimension: diameter, d = 40 cm and height, hcyl = 40 cm. The specific gravity of the wooden cylinder is 0.6. A copper disc, with a diameter of 40 cm and height, hcu = 1 cm, is rigidly attached to the bottom end of the wooden cylinder. The specific gravity of the copper disc is 8.8. The combination of the wooden cylinder and copper disc is placed in the water with their axis are in a vertical position.

(i) Calculate the height of the combined body, which is below the water surface.

(ii) If the height of the copper is to be changed, determine its minimum value so that the combined body is fully submerged.

Expert Solution

samet mamat answered 2 months ago

How do I calculate the volume of a cylinder if the surface of the cylinder is 4239 cm². And the height is equal to the diameter of the base.

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of...

A toroid with inner diameter of 3 cm, outer diameter of 5 cm, and height of 0.1 cm is made of a body-centered-cubic (bcc) paramagnetic material with lattice parameter equal to 0.5 nm. The toroid is wrapped by a copper wire in 20 turns. If each atom of the magnetic material has a magnetic moment of 1.5µB (Bohr Magneton), (a) (1.5 pt) What is the saturation magnetization (in A/m) of the material? (b) (1.5 pt) If a current of 2...

A solid cylinder of diameter 5m has a Hight of 4m Find the metacentric height of...

A solid cylinder of diameter 5m has a Hight of 4m Find the metacentric height of the cylinder. If the specific gravity of the material of the cylinder is 0.7 and is floating in the water with its axis vertical. State whether the equilibrium is stable or unstable.

A piece of lead has the shape of a hockey puck, with a diameter of 7.5 cm and a height of 2.4 cm.

A piece of lead has the shape of a hockey puck, with a diameter of 7.5 cm and a height of 2.4 cm. If the puck is placed in a mercury bath, it floats.Part AHow deep below the surface of the mercury is the bottom of the lead puck?Express your answer using two significant figures.

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm...

A cylindrical glass tank with a diameter of 8.6 cm and a height of 25 cm is inverted and inserted into another tank of water. If no air is allowed to escape from the glass container when submerged, what is the height of the air column in the glass tank when its edge is 2.0 m below the surface of the water?

1.A cylinder of radius a = 7 cm and height h = 11.6 cm is aligned...

1.A cylinder of radius a = 7 cm and height h = 11.6 cm is aligned with its axis along the y-axis as shown. What is the total flux ? that passes through the cylindrical surface? Enter a positive number if the net flux leaves the cylinder and a negative number if the net flux enters the cylnder. 2.Another infinite line of charge with charge density ?2 = -14.7 ?C/cm parallel to the y-axis is now added at x =...

A cylindrical soil sample, 7.3 cm in diameter and 16.8 cm in height, is tested in...

A cylindrical soil sample, 7.3 cm in diameter and 16.8 cm in height, is tested in a constant-head permeability apparatus. A constant head of 75 cm is maintained during the test. After 1 minute of testing, a total of 945.7 gm of water was collected. The temperature was 20 oC. The void ratio of the soil was 0.43. Calculate the following: The hydraulic gradient The flow rate The discharge velocity The seepage force per unit volume The coefficient of permeability

A uniform brass solid cylinder has a mass, m = 500 g, and a diameter, D...

A uniform brass solid cylinder has a mass, m = 500 g, and a diameter, D = 6 cm and a length L = 1 m. The cylinder rotates about its axis of rotational symmetry at an angular velocity of 60 radians/s on a frictionless bearing. (a) What is the angular momentum of the cylinder? (b) How much work was required to increase the angular momentum of the cylinder to this value if the cylinder was initially at rest? Once...

A 40-turn coil has a diameter of 11 cm. The coil is placed in a spatially...

A 40-turn coil has a diameter of 11 cm. The coil is placed in a spatially uniform magnetic field of magnitude 0.40 T so that the face of the coil and the magnetic field are perpendicular. Find the magnitude of the emf induced in the coil (in V) if the magnetic field is reduced to zero uniformly in the following times. (a) 0.30 s V (b) 3.0 s V (c) 65 s V

A circular concrete pile has a low displacement driven with a diameter of 40 cm and...

A circular concrete pile has a low displacement driven with a diameter of 40 cm and a length of 15 m is impeded in a sandy soil. The values of the standard penetration number are assigned for each 1 m depth from top to bottom and these numbers are: 6, 7, 9, 8, 12, 13, 12, 15, 15, 13, 18, 22, 28, 30, 27, 12, 15, 16, 30, 27. Fine the allowable pile capacity of this pile by using Meyerhof’s...

Question