Question

In: Mechanical Engineering

An airplane with a total span length of b = 60 m and cord length of...

An airplane with a total span length of b = 60 m and cord length of c = 6 m wants to land at the airport. Holiday Rentals wing profile is NACA 23012 and single slot flaps are open while landing (α = 12 °, CL, flapli = 3, CD∞ = 0.07). Airplane Find the weight (kN) of the aircraft if it lands at 1200 kW thrust (ρ air = 1.2 kg / m3 ).

Solutions

Expert Solution


Related Solutions

An airplane propeller is 2.28 m in length (from tip to tip) and has a mass...
An airplane propeller is 2.28 m in length (from tip to tip) and has a mass of 132 kg . When the airplane's engine is first started, it applies a constant torque of 1880 N⋅m to the propeller, which starts from rest. A) What is the angular acceleration of the propeller? Treat the propeller as a slender rod. B) What is the propeller's angular speed after making 5.00 rev ? C) How much work is done by the engine during...
An airplane propeller is 1.99 m in length (from tip to tip) with mass 93.0 kg...
An airplane propeller is 1.99 m in length (from tip to tip) with mass 93.0 kg and is rotating at 2500 rpm (rev/min) about an axis through its center. You can model the propeller as a slender rod. What is its rotational kinetic energy? Suppose that, due to weight constraints, you had to reduce the propeller's mass to 75.0% of its original mass, but you still needed to keep the same size and kinetic energy. What would its angular speed...
A rope of length L = 5.3 m with a total mass of m = 0.298...
A rope of length L = 5.3 m with a total mass of m = 0.298 kg is tied to a hook rigidly mounted into a wall. A pulse of height 1.4 cm is sent down the rope. The tension in the rope is F = 27 N. (A) Find the time between sending the pulse down the rope and detecting the pulse that returns. (B) What is the height of the pulse that returns?
although human DNA has a total length of 2 m, it is packaged into a nucleus...
although human DNA has a total length of 2 m, it is packaged into a nucleus that is 5 μm in diameter. Explain how this is possible.
A crossing track was constructed over a water channel with a total length of 1700 m...
A crossing track was constructed over a water channel with a total length of 1700 m and width of 40 m. If you know that the maximum flow that can be carried by the water channel is 400 m3/s over a 25-year storm event. Calculate: a. The probability that the crossing track will flood next year. b. The probability that the crossing track will flood at least once in the next 12 years. c. The probability that the crossing track...
the rod below is a uniformly charged semicircle of arc length .14 m. If the total...
the rod below is a uniformly charged semicircle of arc length .14 m. If the total charge on the rod is -7.50 muy c, magnitude and direction of the electric field at point O? Point O is in the center of the semicircle.
4. Design Considerations. An airplane wing has a long beam along its span called a spar....
4. Design Considerations. An airplane wing has a long beam along its span called a spar. Select a material for the spar in a small aircraft. Explain at least 4 considerations for desirable properties and use data from the text to support your choice. 5. Design consideration. Your company needs a large tapered pin to connect two train cars through solid steel loops. Select a material for the pin. Explain at least 4 considerations for desirable properties and use data...
Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally...
Consider a long (length = 15 m) uniform wooden beam (mass = 60 kg) attached horizontally to a wall that can only support a vertical load ( The horizontal component of the force of the wall on the beam is identically zero). There is a chandelier (mass = 40 kg) hanging at a distance = 4.21 meter from the end of the beam that is attached to the wall. There is a vertical cable hanging down from the ceiling that...
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm...
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm and D=500 mm is reinforced with 2 bars of 32 mm diameter and 1 bar of 25mm diameter in the tension zone. The live load taken by the beam is 19 kN/m. Check if the beam is safe to carry the above load . Use M25 and Fe500.
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm...
1. A 3.5 m clear span singly reinforced cantilever beam has a rectangular section of b=300mm and D=500 mm is reinforced with 2 bars of 32 mm diameter and 1 bar of 25mm diameter in the tension zone. The live load taken by the beam is 19 kN/m. Check if the beam is safe to carry the above load . Use M25 and Fe500.
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT