The followings are parameters of a RLC-series circuit. Use the given information to answer the remaining...

The followings are parameters of a RLC-series circuit. Use the given information to answer the remaining questions.

R = 7.5 Ω

L = 8.2 x 10^-3 H

C = 1.0 x 10^-5 F

Frequency f = 450 Hz

Peak voltage V₀ = 15V

Find the following:

(a) inductive reactance of the circuit

(b) capacitive reactance of the circuit

(d) rms current in the circuit

(e) rms voltage across the resistor

(f) rms voltage across the inductor

(g) rms voltage across the capacitor

(h) power factor of the circuit

(i) phase angle

(j) power dissipated

(k) resonant frequency of the circuit

Solutions

Expert Solution

As it is not mentioned that how many questions has to be attempted. Therefore I have done the first four question as per instructions given to us. Kindly consider it please as this is our protocol if many questions are posted without mentioning that how many of them have to be attempted.

If your doubt is cleared please give an upvote it means a lot. Its a humble request to you.

genius_generous answered 1 year ago

Next > < Previous

Related Solutions

The followings are parameters of a RLC-series circuit. Use the given information to answer the remaining...

The followings are parameters of a RLC-series circuit. Use the given information to answer the remaining questions. R = 7.5 Ω L = 8.2 x 10-3 H C = 1.0 x 10-5 F Frequency f = 450 Hz Peak voltage V0 = 15V Find the following: (a) inductive reactance of the circuit (b) capacitive reactance of the circuit (c) impedance of the circuit (d) rms current in the circuit (e) rms voltage across the resistor (f) rms voltage across the...

3.Consider a series RLC circuit. a) When the capacitor is charged and the circuit is closed,...

3.Consider a series RLC circuit. a) When the capacitor is charged and the circuit is closed, find the condition for the current to be oscillatory. b) When the circuit is connected to an AC source V = ?0 cos??, find the voltage across the inductor and the angular frequency at which the voltage across the inductor is maximized.

A series RLC circuit is connected to a 240V AC generator that operates at 99Hz. In...

A series RLC circuit is connected to a 240V AC generator that operates at 99Hz. In the circuit, R = 4.325 kΩ and C = 0.71mF. You must have a circuit diagram, wherever necessary, to receive full credit on this question. (a) Determine the inductance, L, such that the current in the circuit is 19.1mA. (b) Using the value determined for L in part (a), determine the frequency at which the current in the circuit is maximized. What do physicists...

The resonant frequency of an RLC series circuit is less than the frequency of the fem....

The resonant frequency of an RLC series circuit is less than the frequency of the fem. Does the current overtake this backward to the fem? Explain

A series RLC circuit consists of a 58.0 ? resistor, a 2.50 mH inductor, and a...

A series RLC circuit consists of a 58.0 ? resistor, a 2.50 mH inductor, and a 450 nF capacitor. It is connected to a 3.0 kHz oscillator with a peak voltage of 5.60 V. What is the instantaneous emf E when i = I ? What is the instantaneous emf E when i = 0A and is decreasing? What is the instantaneous emf E when i = - I ?

A series RLC circuit consists of a 56.0 ? resistor, a 3.80 mH inductor, and a...

A series RLC circuit consists of a 56.0 ? resistor, a 3.80 mH inductor, and a 400 nF capacitor. It is connected to a 3.0 kHz oscillator with a peak voltage of 4.10 V. Part A What is the instantaneous emf E when i =I? Express your answer with the appropriate units. 0V SubmitHintsMy AnswersGive UpReview Part Incorrect; Try Again; 5 attempts remaining Part B What is the instantaneous emf E when i =0A and is decreasing? Express your answer...

In the series RLC circuit of problem 1 the resistor is replaced with the higher available...

In the series RLC circuit of problem 1 the resistor is replaced with the higher available value of 68 KOhm. The circuit is driven in forced oscillation regime up to a frequency of 200 KHz. A resonance is observed at a frequency of the order of 160 KHz. How would you explain this result? What combinations of capacitor / inductor values would produce a resonance at that frequency, and what parts of the setup are possible candidates for effective reactance...

(Transient Current) An RLC series circuit has a voltage source given by E(t) = 20sin(t) V,...

(Transient Current) An RLC series circuit has a voltage source given by E(t) = 20sin(t) V, an inductor of 3 H, a resistor 6 Ω, and a capacitor of 1/3 F. Find the current I(t) in this circuit for t > 0 if I(0) = 2, I'(0) = 0. Find the moment of time when the transient current is equal to zero

Question 1 A series RLC circuit has a capacitor with a capacitance of 36.0 ?F ,...

Question 1 A series RLC circuit has a capacitor with a capacitance of 36.0 ?F , an inductor with an inductance of 0.300 H and a resistor with a resistance of 65.0 ?. The circuit is attached to a source that has a rms voltage of 52.0 V and a frequency of 85.0 Hz. What is the peak current, the phase angle and the average power loss? The Peak Current: The Phase Angle: The Average Power Loss:

Develop a series RLC circuit that increases the capacitor voltage to the source voltage as fast...

Develop a series RLC circuit that increases the capacitor voltage to the source voltage as fast as possible with no more than a 20% overshoot. The source voltage is 99V, the capacitance is 9F the and the inductance is 23 H. You can adjust the resistance since that the inductance are the two easiest parameters to adjust. I suggest you find ω0 for your circuit and the value of R that results in a critically damped circuit. Plot this vs....

Subjects