A styrofoam cooler has a total area(including the lid) of 1.0m^2 and a wall thickness of...

A styrofoam cooler has a total area(including the lid) of 1.0m^2 and a wall thickness of 1.0 cm. It is filled with ice, water, and cans of ice-tea. They are at a temperature of 0 degrees celsius.

a) What is the rate of heat flow into the cooler if the temperature of the outside is 20 degrees celsius?

b) How much ice melts in one hour?

Expert Solution

genius_generous answered 2 years ago

A plane wall has thickness of 5 cm, thermal conductivity of 2 W/mK and generates heat....

A plane wall has thickness of 5 cm, thermal conductivity of 2 W/mK and generates heat. The left face of the wall (x=0) has a surface temp. of 80C and has air at 20C flowing past it with a heat transfer coefficient of 50 W/m^2K. If the right face is insulated then the temperature distribution through the wall has a general format T(x)=A+B*x+C*x^2 (a) Draw a properly labeled diagram (including a representative temperature distribution), state all assumptions and calculate the...

If there is a MCM-41 which has wall thickness of 1 nm and pore diameter of...

If there is a MCM-41 which has wall thickness of 1 nm and pore diameter of 3 nm, where would I observe the XRD(2theta) peak?

2) (a) Calculate the Capacitance per unit area of a MOSCAP with an oxide thickness of...

2) (a) Calculate the Capacitance per unit area of a MOSCAP with an oxide thickness of 2 , when it is biased in inversion. The oxide is Silicon dioxide, the semiconductor is silicon, and the metal is Copper. (b) Does your answer depend on if the silicon substrate is p-type or n-type? (c) Does your answer depend on the type of metal used.

Please choose the correct answer for problem 1,2,3,4 1) A brick wall has a thickness of...

Please choose the correct answer for problem 1,2,3,4 1) A brick wall has a thickness of 0.3 m, an area of 30 m2 , and a thermal conductivity of 0.7W/(m· ◦C). One side of the wall is at a temperature of 5◦C and the other side of the wall is at 25◦C. What is the energy/sec flowing through the wall due to conduction? A. 1000 W B. 1200 W C. 1400 W D. 1600 W 2) A brick wall has...

A cooler has 6 Gatorades, 2 colas, and 4 waters. You select 3 beverages from the...

A cooler has 6 Gatorades, 2 colas, and 4 waters. You select 3 beverages from the cooler at random. Let B denote the number of Gatorade selected and let C denote the number of colas selected. For example, if you grabbed a cola and two waters, then C = 1 and B = 0. a) construct a joint probability distribution for B and C. b) compute E[3B-C^2].

A firm has the total variable cost function: ??? = 2? + 2?^2 and total fixed...

A firm has the total variable cost function: ??? = 2? + 2?^2 and total fixed cost of $20. Suppose the market demand is: ? ? = 20 − ?. a. What are the firm’s profit maximizing output and price if it is a monopolist? How much is its profit at this output level? How much is consumer and producer surplus? (Hint: use a diagram to illustrate the market), b. Suppose the government implements a tax of $3 tax unit...

A car of a roller coaster has a total mass of 1000 kg including the passenger....

A car of a roller coaster has a total mass of 1000 kg including the passenger. At position A (the top of the first incline), it cruises at 2m/s. Calculate its velocity at position C at the top of the second incline which is 5 m below the top of the first incline, if there are no losses due to friction on the track or air drag. Calculate the average resistance force (due to friction and drag) between points A...

A hot air balloon has a total mass of 750 kg (not including the air in...

A hot air balloon has a total mass of 750 kg (not including the air in the balloon) and holds a volume of 2.8 x 10^6 L of air. Assume the density of the air outside the balloon to be 1.2 kg/m^3 at a temperature of 20 degrees C and the air pressure is 101.3 kPa inside and outside the balloon. What is the minimum temperature for the air in the balloon to allow for the balloon to float? You...

A silver wire has a cross sectional area A = 2.0 mm2. A total of 9.4...

A silver wire has a cross sectional area A = 2.0 mm2. A total of 9.4 × 1018 electrons pass through the wire in 3.0 s. The conduction electron density in silver is 5.8 × 1028 electrons/m3 and e = 1.60 × 10-19 C. What is the drift velocity of these electrons?

When a sample of MegaCaff that weighs 0.5 g and has a total surface area of...

When a sample of MegaCaff that weighs 0.5 g and has a total surface area of 0.25 m2 was dissolved in water for 2 minutes, the dissolution rate constant (k) was found to be 0.01 cm/min. The saturation solubility is known to be 3.2 x 10-3 g/mL. If the material is now pressed into a tablet with surface area 2.0 cm2, what will be the effect on the dissolution rate (dM/dt) and the dissolution rate constant (k)?

Question