Question

In: Mechanical Engineering

mechanical questions in turbofan engine, the thrust is only generated by the fan, and work generated...

mechanical questions

in turbofan engine, the thrust is only generated by the fan, and work generated by the turbine core is only developed to move the fan and compressor of the entire turbine

true or false


the air fuel ratio used in jet engine is very small

true or false

the definition of thermodynamics is the study of the behavior of gases and heat

true or false

Solutions

Expert Solution

Solutions:

Question:

In turbofan engine, the thrust is only generated by the fan, and work generated by the turbine core is only developed to move the fan and compressor of the entire turbine.

true or false

Answer: False

Explanation:

Because thrust in the turbofan engine is generation not only by the fan but also the engine. Engine produces thrust because of bypass of air from the core of the engine.

Question:

The air fuel ratio used in jet engine is very small

true or false

Answer : False

Explaination :

In jet engine the excessive air is used to burn the fuel so, generally the air fuel ratio in jet engine is very high. For example, 50:1, 130:1. The excessive air makes the air fuel mixture very lean.

Question :

The definition of thermodynamics is the study of the behavior of gases and heat.

true or false

Answer: True

Explanation:

Thermodynamic is the study of heat and convert heat (of gases, steam) into the power. So, the given statement is true.


Related Solutions

1. For airflow through a fan, the mechanical energy balance with fan work along with conservation...
1. For airflow through a fan, the mechanical energy balance with fan work along with conservation of mass are: -W(dot)fan=sum((m(dot)_exit)*(e_exit)) - sum((m(dot)_inlet)*(e_inlet)) so... 0=sum(m(dot)_exit) - sum(m(dot)_inlet) Using the mechanical energy balance and conservation of mass, show that the theoretical fan power added to the air is flow rate multiplied by the pressure rise: W(dot)fan=?*?*P
Is the thrust generated typical of a small jet aircraft engine? I got -99 N explain...
Is the thrust generated typical of a small jet aircraft engine? I got -99 N explain and give me a source
Is the thrust generated typical of a small jet aircraft engine? I got -99 N explain...
Is the thrust generated typical of a small jet aircraft engine? I got -99 N explain and give me a source
Two Way ANOVA A mechanical engineer is studying the thrust force developed by a drill press....
Two Way ANOVA A mechanical engineer is studying the thrust force developed by a drill press. He suspects that the drilling speed and the feed rate of the material are the most important factors. He selects four feed rates and uses a high and low drill speed chosen to represent the extreme operating conditions. He obtains the following results. (A) Feed Rate (B) Drill Speed 0.015 0.030 0.045 0.060 125 2.70 2.45 2.60 2.75 2.78 2.49 2.72 2.86 200 2.83...
25. A turbojet engine gets most of its thrust from an airflow that bypasses the combustor...
25. A turbojet engine gets most of its thrust from an airflow that bypasses the combustor and turbine sections.   a. True b. False 26. A turboprop engine gets most of its thrust from an airflow that bypasses the combustor and turbine sections. a. True b. False 27. In a gas turbine engine for aircraft applications, a diffuser is needed at the inlet to … a. Reduce the speed of the air entering the compressor section to near zero relative to...
A rocket has a mass of 1.40×04 kg and its engine has a thrust of 200×105...
A rocket has a mass of 1.40×04 kg and its engine has a thrust of 200×105 N. If its engines fire in the vertical direction for 1 min starting from rest, to what vertical height would it rise in the absence of air resistance? (To simplify things, assume the mass is constant. However, in reality the mass of rockets decreases substantially while rising)
During engine tests, you measure the thrust (in pounds)10 times and obtain this data: 4061 3637...
During engine tests, you measure the thrust (in pounds)10 times and obtain this data: 4061 3637 3215 4581 4373 4138 3701 3244 4520 4298 Can the normal distribution be used with this data? Use the Central Limit Theorem (CLT) to explain why we can or cannot assume that these values are from a normal distribution. Do you need to make any assumptions in order to apply the CLT? Calculate the mean and variance for this sample. (Assume that you can...
Compute the maximum thrust density, power density and specific impulse for a 3-grided ion engine, having...
Compute the maximum thrust density, power density and specific impulse for a 3-grided ion engine, having an acceleration voltage of 2000 V, and a voltage difference of 2500 V and a gap of 1.5 mm between the plasma and the first acceleration screens. Compute the propulsive parameters for the following propellants: xenon, argon, and molecular hydrogen.
Please show calculation using minitab During engine tests, you measure the thrust (in pounds)10 times and...
Please show calculation using minitab During engine tests, you measure the thrust (in pounds)10 times and obtain this data: 4061 3637 3215 4581 4373 4138 3701 3244 4520 4298 Can the normal distribution be used with this data? Use the Central Limit Theorem (CLT) to explain why we can or cannot assume that these values are from a normal distribution. Do you need to make any assumptions in order to apply the CLT? Calculate the mean and variance for this...
A mechanical. person is intrested in testing if tuning a car engine would improve the gas...
A mechanical. person is intrested in testing if tuning a car engine would improve the gas miliage. A simple random sample of 8 cars were selected to determine the milage (miles per gallon). Then each of the 8 cars were given a tune up (SHOW WORK, please helpp) Data: After Tune up: 28.21, 29.4, 30.42, 29.67, 31.31, 29.68, 28.82, 29.38 Mean: 29.61 Standard Deviation: 0.94 Before Tune Up: 26.9, 26.37, 29.13, 28.46, 28.17, 27.67, 27.84, 27.18, Mean: 27.72 Standard deviation:...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT