A pilot claims to have seen a UFO moving initially at a speed of about 440...

A pilot claims to have seen a UFO moving initially at a speed of about 440 m/s in an easterly direction and then, in a time interval of only 1.0 s, turning 45 degrees and moving southeast at 440 m/s. Compute the UFO’s average acceleration during the turn.

Expert Solution

eastward acceleration, a_e = (440 m/s - 440 m/s * cos45) / 1sec

= 128.87 m/s^2

southward acceleration, a_s = 440m/s * sin45 / 1sec

= 311.13 m/s^2

total acceleration a = = sqrt(a_e² + a_s²)

= sqrt(128.87² + 311.13 ²)

= 336.76 m/s^2

genius_generous answered 2 years ago

A block of mass m1 = 2.20 kg initially moving to the right with a speed...

A block of mass m1 = 2.20 kg initially moving to the right with a speed of 3.10 m/s on a frictionless, horizontal track collides with a spring attached to a second block of mass m2 = 4.7 kg initially moving to the left with a speed of 1.5 m/s.The spring constant is 528 N/m. What if m1 is initially moving at 3.6 m/s while m2 is initially at rest? (a) Find the maximum spring compression in this case. x...

A boat with a mass of 500kg is initially moving at a speed of 20m/s east...

A boat with a mass of 500kg is initially moving at a speed of 20m/s east (+). The kinetic friction force between the hull of the boat and the water has a coefficient of kinetic friction of m=0.05? Part A) What is the magnitude and direction of the kinetic frictional force acting on the boat? Part B) Oars are then extended and used so that the oars provide a force, F= 503N, in a direction that is 20° south of...

A block of mass m1 = 2.3 kg initially moving to the right with a speed...

A block of mass m1 = 2.3 kg initially moving to the right with a speed of 4.8 m/s on a frictionless, horizontal track collides with a spring attached to a second block of mass m2 = 3.5 kg initially moving to the left with a speed of 2.7 m/s. The spring constant is 580N/m. What if m1 is initially moving at 3.6 m/s while m2 is initially at rest? (a) Find the maximum spring compression in this case. x...

A block of mass m1 = 2.9 kg initially moving to the right with a speed...

A block of mass m1 = 2.9 kg initially moving to the right with a speed of 4.3 m/s on a frictionless, horizontal track collides with a spring attached to a second block of mass m2 = 5 kg initially moving to the left with a speed of 2.8 m/s as shown in figure (a). The spring constant is 572 N/m. What if m1 is initially moving at 2.2 m/s while m2 is initially at rest? (a) Find the maximum...

A block of mass m1 = 1.60 kg initially moving to the right with a speed...

A block of mass m1 = 1.60 kg initially moving to the right with a speed of 4.00 m / s on a track horizontal without friction and collides with a spring attached to a second block of mass m2 = 2.10 kg that initially moves to the left with a speed of 2.50 m / s. The spring constant is 600 N / m. a) Find the speeds of the two blocks after the collision. b) During the collision,...

In class, you have seen how to calculate the maximum speed for a car to go...

In class, you have seen how to calculate the maximum speed for a car to go around a flat curve (with friction), and for a banked curve (without friction). Here, you will consider the general case. (For each question part below, include a free-body diagram.) a) (3 points) Explain briefly why the car can go around the banked curve safely even without friction, and why that is not the case for the flat curve. b) (5 points) Now consider a...

We’ve seen that Hume claims that words are used quite frequently that have no "definite idea"...

We’ve seen that Hume claims that words are used quite frequently that have no "definite idea" attached to them. One way for this to happen is for people to have no clear idea of what they are talking about when they use these words. In your view, to what extent is this true of words like 'God,' 'soul' and 'heaven'? Combined with the apparent fact that there are no sense impressions of these things, does this mean, as Hume suggests,...

Question 1: In class, you have seen how to calculate the maximum speed for a car...

Question 1: In class, you have seen how to calculate the maximum speed for a car to go around a flat curve (with friction), and for a banked curve (without friction). Here, you will consider the general case. (For each question part below, include a free-body diagram.) a) (3 points) Explain briefly why the car can go around the banked curve safely even without friction, and why that is not the case for the flat curve. b) (5 points) Now...

For each change made to a protein solution that you have seen or read about, how...

For each change made to a protein solution that you have seen or read about, how might it affect the interactions that are involved in a proteins shape?

We have seen that the standard deviation σ measures the spread of a data set about...

We have seen that the standard deviation σ measures the spread of a data set about the mean μ. Chebyshev's inequality gives an estimate of how well the standard deviation measures that spread. One consequence of this inequality is that for every data set at least 75% of the data points lie within two standard deviations of the mean, that is, between μ − 2σ and μ + 2σ (inclusive). For example, if μ = 20 and σ = 5,...

Question