In designing and maintaining a long wastewater forcemain system or a water supply piping network, or...

In designing and maintaining a long wastewater forcemain system or a water supply piping network, or another fluid system. what steps and activities can you think of that would save energy?

Expert Solution

Ally Wells answered 1 day ago

The piping system that delivers water to the second floor of your house, at an elevation...

The piping system that delivers water to the second floor of your house, at an elevation of 16 feet from the ground, consists of 22 feet of 0.75" ID (ID = Internal Diameter) pipe followed by 16 feet of 0.5" ID pipe. Calculate the minimum pressure required at the beginning of the piping system, located on ground level, for delivering water with a flowrate of 2.7 gallons per minute at atmospheric pressure on the second floor. Consider only losses at...

You are designing a system to add CO2 to water to make carbonated water (sparkling water,...

You are designing a system to add CO2 to water to make carbonated water (sparkling water, like Club Soda or Perrier). If the gas pumped into the bottle above the water is at a pressure of 2 atmospheres and is composed of 100% CO2, what is the equilibrium concentration of dissolved CO2 in the water? If the pH of the water is 5.0, what is the concentration of CO3^-2, HCO3-, and H2CO3 ? (KH=0.0334 mol/L*atm) CO2(aq) + H2O<-----> H2CO3 H2CO3...

Example 3.7: A commercial steel piping system is delivering water at 30°C from pressurized tank A...

Example 3.7: A commercial steel piping system is delivering water at 30°C from pressurized tank A to pressurised tank B as shown in figure below. The internal diameter of the pipe is 2.25 cm. The piping system has a well rounded inlet, 1/4 open gate valve, four 90° flanged bend, two 90° miter bend (with vane) and a sharp exit. The total pipe length is 300 m. Gauge pressure at tank A is 500 bar. If the elevation difference, h...

1) concepts of water flow in piping system? 2) concepts of energy equation Bernonlli equation? 3)...

1) concepts of water flow in piping system? 2) concepts of energy equation Bernonlli equation? 3) concepts of energy head losses? 4) concepts of energy equation momentum? I hope not written in handwriting?

The NPSH of pump of water piping system of low section loss of z1=5 m, P1=0...

The NPSH of pump of water piping system of low section loss of z1=5 m, P1=0 atm gauge, is about

Talk about Water Supply System and how it works in our houses within 2 pages long...

Talk about Water Supply System and how it works in our houses within 2 pages long or more (typed). You may provide pictures.

What factors should Walmart take into account when designing its supply chain network, including where and...

What factors should Walmart take into account when designing its supply chain network, including where and how big its warehouses should be? How do the location and size of warehouses affect the performance of a firm such as Walmart?

proposal for potable water or wastewater treatment

Octane is to be pumped in a piping system that is routed from storage tanks to...

Octane is to be pumped in a piping system that is routed from storage tanks to the main pump by a number of smaller pumps. One such arrangement is shown below. This pump must supply 0.4 m3 /s of octane to the main pump. All fittings are flanged; the pipe is wrought iron, schedule 80, 2 nominal, with L=65 m. The absolute pressure at section 2 is 282.5 kPa. Determine the power required to be transferred to the liquid. Assuming...

What are the various challenges in designing a wastewater treatment plant? Provide, at least three, and...

What are the various challenges in designing a wastewater treatment plant? Provide, at least three, and a way to address these challenges.

Question