Question

In: Physics

Two rods, one made of brass and the other made of copper, are joined end to...

Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.220m and the length of the copper section is 0.780m . Each segment has cross-sectional area 5.10?10?3m2 . The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice and water mixture, in both cases under normal atmospheric pressure. The sides of the rods are insulated so there is no heat loss to the surroundings.

1)What is the temperature of the point where the brass and copper segments are joined?

2)What mass of ice is melted in 6.90

min by the heat conducted by the composite rod?

Solutions

Expert Solution

genius_generous answered 3 hours ago
Next > < Previous

Related Solutions

Two rods, one made of brass and the other made of copper, are joined end to...
Two rods, one made of brass and the other made of copper, are joined end to end. The length of the brass section is 0.500 m and the length of the copper section is 0.700 m . Each segment has cross-sectional area 0.00700 m2 . The free end of the brass segment is in boiling water and the free end of the copper segment is in an ice-water mixture, in both cases under normal atmospheric pressure. The sides of the...
Copper, brass and steel rods are welded to form a ?. The cross sectional area of...
Copper, brass and steel rods are welded to form a ?. The cross sectional area of each rod is 2.00 ??2. The free end of the copper rod is held at 100.0 ° ?; and the free ends of the brass and steel rods, at 0.0 ° ?. Suppose there is no heat loss from the sides of the rods, the lengths of which are: copper, 13.0 ??; brass, 18.0 ??; steel, 24.0 ??. a) What is the temperature of...
Brass is an alloy made from copper and zinc. A 0.66 kg brass sample at 98.6...
Brass is an alloy made from copper and zinc. A 0.66 kg brass sample at 98.6 °C is dropped into 2.33 L of water at 4.6 °C. If the equilibrium temperature is 7.0 °C, what is the specific heat capacity of brass? Express your answer as J/kg°C
Silver and Copper rods of equal areas are placed end to end with the free end...
Silver and Copper rods of equal areas are placed end to end with the free end of the silver rod in ice at 0.00 degrees Celsius and the free end of the copper rod in steam at 100. degrees Celsius. The Silver rod is 15.0 cm in length and the copper rod is 25.0 cm in length. a) What is the temperature of the junction between copper and sliver when they have come to equilibrium? b) How much ice (in...
Two metal rods, one silver and the other gold, are attached to each other. The free...
Two metal rods, one silver and the other gold, are attached to each other. The free end of the silver rod is connected to a steam chamber, with a temperature of 100°C, and the free end of the gold rod to an ice water bath, with a temperature of 0°C. The rods are 5.0 cm long and have a square cross-section, 2.0 cm on a side. How much heat flows through the two rods in 60 s? The thermal conductivity...
Two brass rods AB and BC, each of uniform diameter, will be brazed together at B...
Two brass rods AB and BC, each of uniform diameter, will be brazed together at B to form a nonuniform rod of total length L=110 m that will be suspended from a support at A as shown. Knowing that the density of brass is ρ=9000 kg/m3 and the diameter of AB is c=16 mm, Determine (a) the length of rod AB for which the maximum normal stress in ABC is minimum, (b) the corresponding value of the maximum normal stress....
Two curve plastic rods , one of charge +q and the other of charge -q, form...
Two curve plastic rods , one of charge +q and the other of charge -q, form a circle of radius R = 0.50 cm in an xy plane. The x axis passes through both of the connecting points, and the charge is distributed uniformly on both rods. If q = 15.0 pC, what are the (a) magnitude and (b) direction (relative to the positive direction of the x axis) of the electric field produced at P, center of the circle....
1) Decorative Doors, Inc. produces two types of doors, brass and copper. The company’s simple costing...
1) Decorative Doors, Inc. produces two types of doors, brass and copper. The company’s simple costing system has two direct-cost categories (materials and labor) and one indirect-cost pool. The simple costing system allocates indirect costs on the basis of machine-hours. The owners are curious about how an ABC system would affect their product costing decisions. After analyzing the indirect-cost pool for Decorative Doors, the owners identify five activities as generating indirect costs: production scheduling, material handling, machine setup, assembly, and...
Identify the anode in a galvanic cell of copper and brass electrodes in standard solutions of...
Identify the anode in a galvanic cell of copper and brass electrodes in standard solutions of their own ions. Identify the anode in a galvanic cell of a two-phase microstructure of a 50:50 Pb-Sn alloy. Identify the anode in a galvanic cell of a lead-tin solder on a Cast iron in seawater. Identify the anode in a galvanic cell of a brass bolt in a passive 430 stainless steel plate in seawater.
10. Two conducting loops of the same diameter,  #1 made of copper and #2 made of aluminum...
10. Two conducting loops of the same diameter,  #1 made of copper and #2 made of aluminum wires of the same length and cross-sections are placed on the horizontal surface in a uniform magnetic field directed vertically up. The magnetic field vanishes suddenly. A) While the magnetic field is decreasing, the direction of induced emf force as viewed from above in these loops is: a.   Clockwise b.   Counterclockwise c.   Different for copper and aluminum d.   Zero B) The magnitude of emf in loop #1 is...
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT