Question
In: Civil Engineering
austral steel company has 2 re rolling plants locations P1 and P2with supply capacities of 100...
austral steel company has 2 re rolling plants locations P1 and P2with supply capacities of 100 and 120 tonnes rod (of fixed diameter) per day, respectively. Austral steel has 3 distribution centers at locations DC1, DC2 and DC3. the distribution centers need if possible, 80,120 ,and 60 tonnes of rod each day respectively to meet distribution demands. The shipping socts ($/tonne) is as follows:
From P1 to DC1 = 1
from P1 to DC2 = 2
From P1 to DC3 = 3
From P2 to DC1=4
from P2 to DC 2 = 1
From P2 to DC3 = 5
Develop a formulation for optimal solution to satisfy these constraints
Solutions
Ally Wells answered 2 weeks agoRelated Solutions
Suppose you work for the Pittsburgh Steel Company. Your company specializes in rolling specialty steel alloys and titanium.
Suppose you work for the Pittsburgh Steel Company. Your company
specializes in rolling specialty steel alloys and titanium.
Material is purchased in slabs that may be up to 6 inches thick and
is rolled into plates (about 0.5 inches thick) and sheets (.060 to
0.25 inches thick). Pittsburgh Steel Company's marketing strategy
is to fill smaller orders that their competitors cannot produce
profitably and to specialize in orders for materials that are
difficult to process (like certain steel alloys, etc.)...
A. Steel Supply and Demand for USA are given by ; Demand:P = 1,200 – 100...
A. Steel Supply and Demand for USA are given by ;
Demand:P = 1,200 – 100 (QD) and
supply: P = 100 (QS) where QD = quantity demanded and QS = quantity
supplied
Assume the cross price elasticity of the steel with respect to
cars is 2.5. By how much and in what direction the price of the
related good has changed if the demand for steel increased by
25%.
What will be the demand curve of steel if the...
2. Four chemical plants discharge effluents into streams in the vicinity of their locations. To determine...
2. Four chemical plants discharge effluents into streams in the
vicinity of their locations. To determine if there is any
difference in the extent of pollution created by the effluents,
five samples of liquid waste were collected from each plant. The
data collected is as follows: Plant Polluting Effluents (lb/gal of
waste) A 1.65 1.72 1.50 1.37 1.60 B 1.70 1.85 1.46 2.05 1.80 C 1.40
1.75 1.38 1.65 2.00 D 2.10 1.95 1.65 1.88 2.00 (b) Do the data...
2. Suppose a consumer has an income of $100. P1=10 and p2=10. a. Draw the consumer's...
2. Suppose a consumer has an income of $100. P1=10 and p2=10. a.
Draw the consumer's budget constraint b. On the same drawing, add
an indifference curve on which the optimal basket lies. Assume the
indifference curve is convex as usual c. On the same drawing, add
an indifference curve which has a lower utility level than the
optimal basket. Make sure to include the intersections of the curve
with the budget constraint, and carefully explain why they cannot
be...
A steel company is considering the relocation of one of its manufacturing plants. The company’s executives...
A steel company is considering the relocation of one of its
manufacturing plants. The company’s executives have selected four
areas that they believe are suitable locations. However, they want
to determine if the average wages are significantly different in
any of the locations, since this could have a major impact on the
cost of production. A survey of hourly wages of similar workers in
each of the four areas is performed with the following results. Do
the data indicate a...
A steel company is considering the relocation of one of its manufacturing plants. The company’s executives...
A steel company is considering the relocation of one of its
manufacturing plants. The company’s executives have selected four
areas that they believe are suitable locations. However, they want
to determine if the average wages are significantly different in
any of the locations, since this could have a major impact on the
cost of production. A survey of hourly wages of similar workers in
each of the four areas is performed with the following results. Do
the data indicate a...
A steel company is considering the relocation of one of its manufacturing plants. The company’s executives...
A steel company is considering the relocation of one of its
manufacturing plants. The company’s executives have selected four
areas that they believe are suitable locations. However, they want
to determine if the average wages are significantly different in
any of the locations, since this could have a major impact on the
cost of production. A survey of hourly wages of similar workers in
each of the four areas I performed with the following results.
Hourly Wages ($)
Area 1...
The Rolling Department of Oak Ridge Steel Company had 5,100 tons in beginning work in process...
The Rolling Department of Oak Ridge Steel Company had 5,100 tons
in beginning work in process inventory (90% complete) on July 1.
During July, 85,400 tons were completed. The ending work in process
inventory on July 31 was 4,300 tons (40% complete).
What are the total equivalent units for direct materials for
July if materials are added at the beginning of the process?
Equivalent Units of Materials Cost The Rolling Department of Kraus Steel Company had 8,100 tons in...
Equivalent Units of Materials Cost The Rolling Department of
Kraus Steel Company had 8,100 tons in beginning work in process
inventory (50% complete) on October 1. During October, 50,800 tons
were completed. The ending work in process inventory on October 31
was 2,500 tons (30% complete). What are the total equivalent units
for direct materials for October if materials are added at the
beginning of the process?
Equivalent Units of Conversion Costs The Rolling Department of Kraus Steel Company had 5,747 tons in...
Equivalent Units of Conversion Costs The Rolling Department of
Kraus Steel Company had 5,747 tons in beginning work in process
inventory (60% complete) on October 1. During October, 82,100 tons
were completed. The ending work in process inventory on October 31
was 4,105 tons (30% complete). What are the total equivalent units
for conversion costs? Round to the nearest whole unit.
The Rolling Department of Kraus Steel Company had 5,300 tons in
beginning work in process inventory (30% complete) on...
ADVERTISEMENT
ADVERTISEMENT
Latest Questions
- Note: There is no database to test against FactoryUsers WorkerId Number(4) Not Null [PK] WorkerName Varchar2(20)...
- You are employed as an accountant by a new company called Refresh Ltd. The company was...
- Run the following code. Discuss the output result, i.e. the value of seq variable. #include <stdio.h>...
- Florida Farms (FFC) is considering producing a new fruit juice, Elite. FFC has spent two years...
- Islamic parent: “My child’s school has many Christian-based activities and has never even recognized that some...
- If answer can be shown using a c++ program and leave comments it will be very...
- Program 1: Stay on the Screen! Animation in video games is just like animation in movies...
ADVERTISEMENT