Question

In: Mechanical Engineering

In a household refrigerator with evaporator temperature -10 ° C and condenser pressure 1000 kPa R134a...

In a household refrigerator with evaporator temperature -10 ° C and condenser pressure 1000 kPa R134a is used as refrigerant. Saturated steam at the compressor inlet The refrigerant that is in the state is in the state of saturated liquid at the outlet of the condenser. Entropy at the compressor outlet is 0.985 kJ / kgK. According to this,

a) Cycle T-s and P-h diagrams, showing saturation curves on the diagram Draw.

b) Calculate the isentropic efficiency of the compressor.

c) Find the cooling performance coefficient of the refrigerator.

d) What is the second law efficiency of this refrigerator?

PLEASE EXPLAİN STEP BY STEP

Solutions

Expert Solution

samet mamat answered 2 hours ago
Next > < Previous

Related Solutions

Superheated vapor enters the turbine at 10 MPa, 480°C, and the condenser pressure is 7.5 kPa...
Superheated vapor enters the turbine at 10 MPa, 480°C, and the condenser pressure is 7.5 kPa of a steam Rankine power cycle. Isentropic efficiencies of the turbine and pump are 84% and 73%, respectively. Determine for the cycle a. Sketch the cycle of a T-s diagram. Indicate the isobars with their values and the values for temperature and entropy. b. The heat transfer to the working fluid passing through the steam generator, in kJ per kg of steam flowing. c....
Superheated vapor enters the turbine at 10 MPa, 480°C, and the condenser pressure is 7.5 kPa...
Superheated vapor enters the turbine at 10 MPa, 480°C, and the condenser pressure is 7.5 kPa of a steam Rankine power cycle. Isentropic efficiencies of the turbine and pump are 84% and 73%, respectively. Determine for the cycle a. Sketch the cycle of a T-s diagram. Indicate the isobars with their values and the values for temperature and entropy. b. The heat transfer to the working fluid passing through the steam generator, in kJ per kg of steam flowing. c....
Assume that the difference in temperature between a condenser and a evaporator decreases. How will the...
Assume that the difference in temperature between a condenser and a evaporator decreases. How will the volumetric efficiency of the cooling compressor be affected by this. Show this by describing it in a pv diagram.
A Carnot-cycle refrigerator rejects heat at the pressure of 1000 kPa during which the working fluid...
A Carnot-cycle refrigerator rejects heat at the pressure of 1000 kPa during which the working fluid R -134a changes from saturated vapor to saturated liquid. The heat is added to the cycle at the pressure of 320 kPa. Show the cycle in a T-s diagram and determine the coefficient of performance of the cycle using a) the first law of thermodynamics b) the Carnot cycle efficiency equation and c) the T-s diagram.
Air at a pressure of 350 kPa, a temperature of 80°C, and a velocity of 180...
Air at a pressure of 350 kPa, a temperature of 80°C, and a velocity of 180 m/s enters a convergent–divergent nozzle. A normal shock occurs in the nozzle at a location where the Mach number is 2. If the air mass flow rate through the nozzle is 0.7 kg/s, and if the pressure on the nozzle exit plane is 260 kPa, find the nozzle throat area, the nozzle exit area, the temperatures upstream and downstream of the shock wave, and...
A mass of 0.07 kg of air at a temperature of 30°C and pressure 100 kPa...
A mass of 0.07 kg of air at a temperature of 30°C and pressure 100 kPa is compressed to a pressure of 600 kPa, according to the law: (i.e. Polytropic process, n=1.3). Determine: i.The final volume ii.The final temperature iii.The work transfer iv.The change in internal energy v.The heat transfer
Rankine cycle operates on boiler pressure 15 MPa and condenser pressure of 30 kPa. Superheated steam...
Rankine cycle operates on boiler pressure 15 MPa and condenser pressure of 30 kPa. Superheated steam enters the high-pressure turbine at 450°C. The high-pressure turbine expands the steam and enters the re-heater at 2.5 MPa. The steam is reheated until temperature reaches 450°C before being expanded in low-pressure turbine to condenser pressure of 30 kPa. Assume the isentropic efficiency of the low-pressure and high-pressure turbines are 94% and 89% respectively, and pump is working isentropically. Neglect the change in kinetic...
A refrigerator with R-410a as the working fluid has a minimum temperature of −10°C and a...
A refrigerator with R-410a as the working fluid has a minimum temperature of −10°C and a maximum pressure of 1 MPa. Assuming an ideal refrigeration cycle, find the specific heat transfer FROM the cold space, the specific heat transfer TO the hot space, and the coefficient of performance. Will this refrigeration cycle work in an ordinary kitchen?
Air is at 100 kPa and 150°C, and undergoes a constant pressure process. The final temperature...
Air is at 100 kPa and 150°C, and undergoes a constant pressure process. The final temperature of the air is 1000°C. a) Compute the specific volume ratio. b) Compute the boundary work (kJ/kg) c) Compute the change in specific internal energy by: 1. Using the tables. 2. Integrating the polynomial (cp) 3. Assuming constant specific heat. d) Repeat c for specific enthalpy e) Compute the heat
Estimate the vapor pressure of seawater at 20°C given that the vapor pressure of pure water is 2.338 kPa at that temperature
Estimate the vapor pressure of seawater at 20°C given that the vapor pressure of pure water is 2.338 kPa at that temperature and the solute is largely Na+ and Cl- ions, each present at about 0.50 mol/dm3.
ADVERTISEMENT
Subjects
ADVERTISEMENT
Latest Questions
ADVERTISEMENT