. The average flow of wastewater into the Metropolitan Wastewater Treatment Plant is 180 MGD. What...

. The average flow of wastewater into the Metropolitan Wastewater Treatment Plant is 180 MGD. What is the loading of total solids in this wastewater (lbs/day)? What is the loading of volatile solids in this wastewater (lbs/day)?

Expert Solution

AS PER INDIAN STANDARD CODE

About 80 % of water supply to the community gets converted into sewage,

sewage is more then 99.9% water and less than 0.1% solid such that if 1000 kg of sewage of sample is considered it consist of only 0.45kg of total solid

if the sample is allowed to stand in Imhoff cone for 2 hrs than the amount of solid settled in it are termed as settleable solids.

Ally Wells answered 1 month ago

A water treatment plant is designed for a constant flow rate of 3 MGD. The flocculation...

A water treatment plant is designed for a constant flow rate of 3 MGD. The flocculation system consists of three tanks, each having a water depth of 10 ft and an average hydraulic residence time (HRT) of 30 min. (a) Determine the dimension of each tank (i.e., width and length). (b) Determine whether the flow through velocity is acceptable. (c) The plant is planning to take one tank out of service for maintenance. Determine the increase in power requirement...

A new wastewater treatment plant was built to treat the wastewater flow 800,000 gpd. The capital...

A new wastewater treatment plant was built to treat the wastewater flow 800,000 gpd. The capital cost to build the wastewater treatment plant was $6,000,000. The annual operation and maintenance costs of operating the plant is $700,000/year. Estimate the cost of treating 1000 gallons of wastewater ($/1000 gallon). Assume the design life as 20 years and interest rate of 4%.

The total flow at a wastewater treatment plant is 682 m3/day. The purpose of the plant...

The total flow at a wastewater treatment plant is 682 m3/day. The purpose of the plant is to remove compound Z from the wastewater by treating it in reactors, using a newly developed microbial process. Assume the microbial treatment can be modeled as a first order reaction with a rate coefficient of 0.36/h. Suppose the flow is split evenly and treated in two parallel reactors– one complete mix and one plug flow -- each with a volume of 88 x...

Consider the design of a wastewater treatment plant (WWTP) for a community with average daily and...

Consider the design of a wastewater treatment plant (WWTP) for a community with average daily and peak hourly wastewater design flows of 7570 m3/day and 18925 m3/day. The raw sewage has an average of 240 mg/L BOD5 and 270 mg/L of suspended solids. (a) Assume that the primary sedimentation process removes 55% of the suspended solids and 35% of the BOD5 of the raw sewage. Determine the SS and BOD5 concentrations in the primary sedimentation effluent flow. (1 mark) The...

A wastewater treatment plant has a rupture in one of their flow tubes, thereby leading to...

A wastewater treatment plant has a rupture in one of their flow tubes, thereby leading to the discharge of waste material into a local lake system. The rupture goes unnoticed for a long enough time that the concentration of the waste in the lake reaches a steady state. Assume that the lake can be modeled as a continuously stirred tank reactor, with inflow, outflow, and complete mixing, and that the lake flows so that the volume remains constant at 107...

The Wilson Wastewater Treatment Plant currently provides primary treatment for a flow rate of 2500 m3/day....

The Wilson Wastewater Treatment Plant currently provides primary treatment for a flow rate of 2500 m3/day. The effluent from the primary tank has a soluble BOD5= 240 mg/L. You need to design an activated sludge treatment to update the plant. The secondary effluent standards to meet are 25.0 mg/L BOD5 total (suspended and soluble BOD) and 30 mg/L suspended solids. Use the following assumptions: Target soluble BOD5 in the effluent of the secondary treatment is 2.5 mg/L. Growth constants can...

What is wastewater treatment? what is the process of wastewater treatment? why is wastewater treatment important?...

What is wastewater treatment? what is the process of wastewater treatment? why is wastewater treatment important? No Plagiarism. Please Print essay format question

An activated sludge plant receive 5.0 MGD of wastewater with a BOD of 220 mg/L. The...

An activated sludge plant receive 5.0 MGD of wastewater with a BOD of 220 mg/L. The primary clarifier removes 35% of the BOD. The sludge is aerated for 6 hr. The food-to-microorganism ratio is 0.30. The recirculation ratio is 0.2. The surface loading rate of the secondary clarifier is 800 gal/day-ft2. The final effluent has a BOD of 15 mg/L. What are the (a) BOD removal efficiency of the activated sludge treatment processes (secondary BOD removal), (b) aeration tank volume,...

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...

A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...

A conventional activated-sludge plant treats 10.0 MGD of municipal wastewater with a BOD concentration of 240...

A conventional activated-sludge plant treats 10.0 MGD of municipal wastewater with a BOD concentration of 240 mg/l and suspended solids of 200 mg/l. The sludge flow pattern is shown in Figure 11-1 of the textbook with a gravity belt thickener to concentrate the excess activated sludge. Primary and thickened activated sludge are pumped separately to the anaerobic digester. The primary clarifier removes 50% of the suspended solids and 35% of the BOD. The primary sludge solids content is 4.0%. The...

Question