Question

In: Civil Engineering

A brick laid its greatest dimension horizontal and its face parallel to the wall face called...

A brick laid its greatest dimension horizontal and its face parallel to the wall face called

A)Shiner

B) Plasticity

C) Strength

D) All of the above

Grouting brick or CMU wall serves to

  1. Increase the cross sectional area of the wall
  2. Resist vertical and lateral shear loads
  3. Bonds wythes together

D. All of the above

Solutions

Expert Solution

1. A brick laid its greatest dimension horizontal and its face parallel to the wall face called

A)Shiner

B) Plasticity

C) Strength

D) All of the above

Answer is A) Shiner

Shiner is a term used in brick masonry to indicate a brick laid with its longer edge horizontal and face parallel to the face of wall.

2. Grouting brick or CMU wall serves to

A)Increase the cross sectional area of the wall

B) Resist vertical and lateral shear loads

C) Bond wythes together

D) All of the above

Answer is D) All of the above

Grout is mixture of cement and water to fill the space in masory work. It helps to bond two wythes together so as to act as a single system and allows to resist higher vertical compressive and lateral shear loads. Grouting of the core also results in increasing the cross sectional area of the masonry wall. Higher water content of the grout also compensate the water absorption of the masonry leading to higher strength.


Related Solutions

A horizontal rod of length 508 cm is held aloft by friction against a brick wall...
A horizontal rod of length 508 cm is held aloft by friction against a brick wall on one end and on the other end by a rope of length 628cm, which itself is attached to the brick wall directly above where the rod touches the wall. The coefficient of static friction between the wall and the rod is 0.435. A ball of the same weight as the rod hangs from the rod. What is the minimum distance ball must hang...
A horizontal 14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end.
A horizontal   14.9 kg beam 2.1 m long is attached to the wall by a hinge at its left end. A cable is connected from the right end of the beam to the wall, at an angle of  27 ° above the beam, as shown below. A 55 kg sign is hung  1.6 m from the left end of the beam.Part A - Find the tension in the cable.Part B - Find the horizontal force exerted on the wall by the hinge.Part...
ADVERTISEMENT
ADVERTISEMENT
ADVERTISEMENT